Ubiquiti Rocket M2 Titanium User manual

Carrier Class
AirMax BaseStation
Models: M2/M5 Titanium

1
Introduction
Introduction
Thank you for purchasing a Rocket M Titanium series product.
This Quick Start Guide is for use with the following models:
Model Operating Frequency
Rocket M2 Titanium 2402-2482 MHz
Rocket M5 Titanium 5170-5875 MHz*
* Only 5725-5850 MHz supported in the USA and Canada
Package Contents
Rocket Metal Strap 48V PoE Adapter Power Cord
Carrier Class
AirMax BaseStation
Models:M2/M5 Titanium
GPS Patch Antenna RF Cables (Qty. 2) Quick Start Guide
Installation Requirements
• GPS antenna needs to have clear line of sight to the sky.
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through
the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable

2
Rocket M Titanium
Hardware Overview
Connects to Sector
or Dish Antenna
Connects to Sector
or Dish Antenna
Connects to GPS
Patch Antenna
Removable Cover
Secondary (AUX)
Ethernet Port
Primary (MAIN)
Ethernet Port
LEDs
Main The first Ethernet LED will light steady green
when an active Ethernet connection is made to the
Primary Ethernet Port and flash when there is activity.
Aux The second Ethernet LED will light steady
green when an active Ethernet connection is made
to the Secondary Ethernet Port.

3
Connecting the Rocket Titanium
Connecting the Rocket Titanium
The Rocket M Titanium can be used with a Dish or Sector Antenna.
The cable connections are the same for either antenna type.
1. Press on both sides of the Removable Cover to slide it off.
2. Connect an Ethernet cable to the Primary Ethernet port on the
Rocket Titanium.
3. Connect the GPS Patch Antenna to the center SMA connector
on the Rocket Titanium.

4
Rocket M Titanium
4. Attach the RF cable connectors without the rubber shrouds to
the Rocket Titanium connectors labeled Chain 0 and Chain 1.
Connector
without Shroud
Connector with
Rubber Shroud
Note: The connectors with the rubber shroud should
not be connected on the inside of the Rocket Titanium.
5. Reconnect the Removable Cover.
6. Connect the Rocket Titanium to the Antenna.
7. Connect the other ends of the RF cables with the rubber
shroud to the SMA connectors on the Antenna.
Connecting to a Sector Antenna Connecting to a Dish Antenna

5
Connecting the Rocket Titanium
8. Place the magnetic GPS Patch Antenna on the pole mounting
bracket.
Recommended Placement of GPS Patch Antenna on a Dish Antenna
Recommended Placement of GPS Patch Antenna on a Sector Antenna

6
Rocket M Titanium
9. Connect the other end of the Ethernet cable from the Rocket
Titanium to the Ethernet port labeled POE on the PoE Adapter.
10. Connect an Ethernet cable from your LAN to the Ethernet port
labeled LAN on the PoE Adapter.
11. Connect the power cord to the power port on the PoE Adapter.
Connect the other end of the power cord to a power outlet.

7
AirOS Confirmation
AirOS Confirmation
Verify connectivity in the AirOS interface.
1. Make sure that your host machine is connected via Ethernet to
the Rocket.
2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet.
3. Launch your Web browser and type http://192.168.1.20 in the
address field and press enter (PC) or return (Mac).
4. The login screen will appear. Enter ubnt in the Username and
Password fields. Select your Country and Language. You must
agree to the Terms of Use to use the product. Click Login.
Note: U.S. product versions are locked to the U.S. Country
Code to ensure compliance with FCC regulations.

8
Rocket M Titanium
5. On the Main tab you can verify the GPS Signal Quality. Click
on the GPS Details tab under Monitor to view the Satellite and
Signal details.
GPS Details tab
The AirOS Interface will allow you to customize your settings as
needed.