V-Tec H35 User manual

User’s Manual
Model No.: H35
‘
1. What’s Included
2. Overview
1) Top View
2) Rear View
3) Bottom View
3. Getting Started
1) Wireless Connection
2) Android Cast
3) Air Play
4) SD-Card & U-Disk playing
4. Settings
5. Specification
6. Troubleshooting
1 2

1, What’s Included
2, Overview
1) Top View
：RETURN
. : ENTER, OR SHUTDOWN WHEN PRESSED FOR 3 SECONDS
+ : VOLUME UP, OR LEFT
- : VOLUME DOWN, OR RIGHT
Type-C adapter
cable
Magnet Instruction
Manual
3
4

2) Rear View
○
1 Remote Control
○
2 USB-C port
○
3 Indicator: Red - working, Blue-Charging
○
4 Reset
○
5 SD Card slot
○
6 Focus wheel
3）Bottom View
Iron slice Inside
To put the projector on top of
Tripod mount through magnet by
following below steps:
a) Screw the magnet to the tripod mount
b) Put projector on top of magnet. Projector will be
attracted to the magnet due to there is a piece of iron
slice inside the bottom of projector
6
5

3, Getting Started
Main Meu
1) There are three ways to connect mobile device and H35
projector through WiFi :
A. Set phone and projector under the same Home or Office WiFi
network, this will let you use mirroring / cast function easily,
no need to connect both devices every time.
B. Use projector as Hotspot, and connect mobile device to H35
C. Connect H35 to mobile device’s Hotspot by setting H35’s WiFi
Setting your mobile device for wireless casting after above
connection ready :
 When use Apple phone’s Airplay:
Open iPhone control panel, select “Screen Mirroring”,
then choose “Project-xxxxxx”
 When use Android phone MiraCast:
Open Settings -> Other Wireless Connections ->
Multi-screen Interaction / Wireless Display, and choose
Projector-xxxxxx ,
Or open DLNA option to use DLNA function
2) Android MiraCast / DLNA
Press Android Icon, Enter Mira Cast and DLNA functions
Press MiraCast Icon to enter MiraCast UI, following below
instructions to use MiraCast :
a) Projector’s hotspot name is shown on top the screen
as Projector-xxxxxx
b) On your Android phone, Settings -> Other Wireless
Connections -> Multi-screen Interaction / Wireless
Display, and choose Projector-xxxxxx
c) Done
Press DLNA icon to enter DNLA UI, following below
instruction to use DLNA function:
a) Projector’s hotspot name is shown on top the screen as
Projector-xxxxxx
b) On your Android phone, Settings -> Other Wireless
Connections -> open DLNA option
c) Done
7
8

3) Apple Airplay function
Press AirPlay icon to enter into Airplay UI, and :
a) Projector’s hotspot name is shown on top the screen as
Projector-xxxxxx
b) Open your iPhone’s control panel
c) Select Screen Mirroring, choose Projector-xxxxxx and
enter into Airplay mode
Press “Wired Connection” icon to enter into Wired Cast UI, and
following the instructions :
a) Connect type-C adapter cable’s type-C male connector to
projector’s type-C port on the rear side
b) Connect male USB-A connector to charger, let charger
provide power input to make wired connection work.
c) Connect MFI cable to USB-A female connector on the cable
adapter
d) Wait around 30 seconds, one message window Pop up, and
select Trust option on the screen
e) Done
9
10

4) SD card and U-Disk playing
a) Play multi-media files from SD card, just press SD card
icon , and select the item that you want to play
b) Play multi-media files from U-Disk
 Connect type-C adapter cable’s type-C connector to
projector’s type-C port on the rear side
 Connect USB-A male connector to the charger, let
charger provide power into to U-Disk
 Connect U-Disk to female USB-A connector
 Contents on the U-Disk displayed on the screen, select
the item that you want to play
4, Setting
 Setting WiFi network
The projector will automatic connect to your WiFi
network that you set last time.
Select “Search”, there will be a list of WiFi networks
listed on the screen, choose the one you want to
connect.
Enter the WiFi password that it will be stored in the
projector’s internal memory.
11 12

5, Specification
 Power supply: DC 5V / 1A
 Power consumption: < 5W
 DLP Light source: RGB LED
 Projection image size: 30 – 65 inch
 Resolution: 640 x 360 pixels
 Brightness: ANSI 35 lm
 Contrast ratio: 800:1
 Projection ratio: 1.68
 Speaker drivers: 1 w x 1
 Built-in battery type: Li-Polymer Capacity: 2200 mAh 3.8V
Video play duration: 1.5 hours
 Operating temperature: 0°C to 35°C / 32°F to 95 °F
 Operating humidity: 15% ~ 85% (non-condensing)
 Storage temperature and humidity: < 65°C / 149°F,
< 90% humidity
 Dimension (W*H*D):
60 × 60 × 60 mm
 Weight: 200 g
6, Troubleshooting
 Fail to power on by the remote control ?
Make sure that the device is connected to the power
supply when battery is out of power
 Fail to read U-Disk ? 
Make sure that the device is connected to the power
supply through adaptor cable by male USB-A port.
 The remote control doesn’t work? 
Remove the battery insulation tab to activate the remote
control battery, or replace with new battery.
 Blurred image? 
You can either slightly move the wheel on the rear panel to
focus the image.
13
14