Volfoni SmartCrystal Cinema Neo VPSP-11000 User manual

SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
1
www.volfoni.com
1
Model VPSP-11000

SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
2
www.volfoni.com
2
SUMMARY
SUMMARY.................................................................................................................................................2
I. PRODUCT OVERVIEW ........................................................................................................................3
II. REQUIREMENTS ................................................................................................................................3
III. SMARTCRYSTAL CINEMA NEO FEATURES .........................................................................................5
A. General specifications.......................................................................................................................5
B. Technical specifi cations .................................................................................................................5
C. Electrical specifi cations ................................................................................................................5
D. Projector settings ............................................................................................................................6
IV. USING THE SMARTCRYSTAL CINEMA NEO........................................................................................6
A. User interface description .............................................................................................................6
B. Using the user interface....................................................................................................................7
ON / OFF switch................................................................................................................................... 71.
2D / 3D mode ................................................................................................................................... 72.
Network connection –Rj 45 plug .................................................................................................... 73.
Software update –USB port................................................................................................................ 74.
LED check .......................................................................................................................................... 85.
Remote control.................................................................................................................................... 86.
BNC connector ................................................................................................................................. 87.
Connect the power cable to SmartCrsytal™ Cinema .......................................................................... 88.
Snap hook............................................................................................................................................ 99.
Easy maintenance................................................................................................................................ 910.
V. SMARTCRYSTAL CINEMA NEO BRACKET.........................................................................................10
VI. INSTALLATION .................................................................................................................................11
A. Phase one........................................................................................................................................12
B. Phase two........................................................................................................................................12
VII. TROUBLESHOOTING........................................................................................................................13
VIII. SOFTWARE UPDATE ........................................................................................................................14
IX. IMPORTANT SAFETY RECOMMENDATIONS....................................................................................14
X. WARRANTY......................................................................................................................................14

SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
3
www.volfoni.com
3
XI. FURTHER INFORMATION ................................................................................................................15
XII. REGULATORY STANDARDS..............................................................................................................15

3
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
I. PRODUCT OVERVIEW
The SmartCrystal™ Cinema Neo is Volfoni’s latest innovation in passive 3D
technology. The SmartCrystal™ Cinema polarization window is placed directly in
front of a 3D cinema projector lens, thereby generating stereoscopic 3D images on
suitable screens when viewed with passive 3D glasses.
This passive polarization system is perfect for any movie theater with DCI-compliant
DLP projectors, and permits a quick installation in any projection booth with its
optimal support brackets.
The SmartCrystal™ Cinema panel is made of a multi-layer stack of liquid crystal
elements. This enables high frame rates of up to 240Hz, creating crisp and bright 3D
images.
The SmartCrystal™ Cinema Neo can be connected directly to any suitable 3D
synchronization source and operates with cinema projectors up to 7kW.
II. REQUIREMENTS
To use the SmartCrystal™ Cinema Neo unit, the following is required:
•3D content
•3D cinema projector
•Polarization preserving silver screen
•Passive circular-polarized 3D glasses
Fig 01
Fig 02

4
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
Most types of 3D cinema projectors are compatible with the SmartCrystal™ Cinema Neo
system.
DLP (Digital Light Processing) projectors are especially efficient for 3D projection. The
system is easy to set-up with a DCI-compliant DLP projector and works with projector
lamps up to 7KW.
LCD™ (Liquid Crystal Display) and LCoS™ (Liquid Crystal on Silicon) projection
technologies, such as JVC’s D-ILA™ and Sony’s SXRD™, generate a polarized light beam
that may not be compatible with SmartCrystal™ Cinema Neo’s active polarization
system. Please consult Volfoni for additional information.
Polarization-preserving silver screen
In order to enjoy the best quality of 3D images, a polarization-preserving silver screen
designed for 3D projection is required. If your screen was not manufactured specifically
for 3D use, you might experience uncomfortable and blurry 3D images with a high level of
cross-talk.
The SmartCrystal™ Cinema is designed for projection with screen sizes up to 20 meters (66
feet) wide, with a 2.4 screen gain.
Passive polarized 3D glasses
The SmartCrystal™ Cinema Neo is compatible with most commonly used passive 3D
glasses (circular-polarized only).
Please contact Volfoni ([e-mail]) should you be
interested in our line of passive 3D glasses.

5
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
III. SMARTCRYSTAL CINEMA NEO FEATURES
A. General specifications
•Aluminum mechanical-housing material
•Pi-Cell Technology for crisp and bright 3D images
•Upgradable software for optimal 3D performance
•Meets all standards for electronics approved by CE
•Easy maintenance
•3-year warranty
•For use with lightweight circular-polarized passive 3D glasses
Passive 3D glasses as well as clip-on 3D glasses are available from Volfoni. Please contact
us for more details. [e-mail]
B. Technical specifi cations
•Maximum power of projector lamp: 7 kW
•Maximum switching speed: 244Hz
•Optical light efficiency: > 18%
•Power supply: 110V/240V 50/60Hz
•Operating temperature: +10°C to +50°C (50°F to 122°F)
•Storage temperature: -5°C to+50°C (23°F to 122°F)
•Polarization window dimension: 171 x 116mm (6.7 x 4.5 in)
•Product dimensions (L x W x H): 380 x 254 x 77mm (15x 10 x 3in)
•Weight: 6kg (13.2lbs)
C. Electrical specifi cations
•V= 240 / 110 V AC
•F = 50 / 60 Hz
•P = 18 W
•The unit has a built-in surge protector
•The system is supplied with different adapters: UK, EU, US
•This equipment should be electrically grounded
•In case of malfunction, one of the LED indicators on the control board will light up
•To rectify any indicated faults, please contact your reseller or integrator stating the model
number shown on the silver label of the product.

6
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
D. Projector settings
To use the SmartCrystal™ Cinema Neo, the 3D projector should be set as below:
•Dark Time: 350 μs
•Delay: 0
IV. USING THE SMARTCRYSTAL CINEMA NEO
A. User interface description
1- Switch ON/OFF
2- 2D/3D
3- RJ45 (NOC)
4- USB (Software Update)
5- LEDS (Visual Control)
6- Remote control
7- BNC (Synchronisation)
8- 12V (Power supply)
Fig 03

7
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
B. Using the user interface
ON / OFF switch1.
Put this button in position ON to power the SmartCrystal™ Cinema Neo and begin
operating the system. Put it in position OFF when you want to stop using the 3D system.
2D / 3D mode 2.
There is one button that moves the polarization window of the SmartCrystal™ Cinema
Neo left and right. When the system is powered, press this button and the polarization
window will emerge from its encasement (3D mode). Press this same button when you
want to stop using the SmartCrystal™ Cinema, and the polarization window will go back
inside its encasement (2D mode).
This button blinks in green when the polarization window is moving. Typically when you
open or close the polarization window of the SmartCrystal™ Néo.
This button is green continuously when the 3D system is open and the polarization window
is out of the encasement. This button is not illuminated when the polarization window is in
2D mode.
Security system: The polarization window will stay in 3D mode if the 3D sync is still
detected. This is a security measure to prevent the closing of the 3D system during a 3D
projection.
When not using the SmartCrystal™ Cinema, put the system in 2D mode to protect
the polarization window from dust and damage, and thereby increase product
longevity.
Network connection –Rj 45 plug 3.
The NOC connector allows the system to be connected to a central network in order to
retrieve information and perform remote operations on the SmartCrystal™ Cinema Neo
(e.g., monitoring, remote control, etc.).
There are two different modes of use for the SmartCrystal™ Cinema Neo:
•Manual mode: the user interface of the SmartCrystal™ Cinema Neo directly controls the
operation of the 3D system.
•NOC mode: information and operations are automatically sent from the server via the
central network.
Software update –USB port4.
Please referrer page 8 of this user manual (part 8).

8
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
LED check 5.
There are 4 different LED lights that indicate the following information:
LED number 1: STATE OF FAN
This LED is blue when the fan is running and red when there is a problem with the
ventilation system.
LED number 2: STATE OF MOTOR
This LED is blue when the motor is running and red when there is a problem with the
system.
LED number 3: STATE OF SYNC
This “SYNC” LED operates as follows:
- Once the system is powered (but not synchronized), the SYNC LED will illuminate in red.
The system starts as soon as it is connected to a power source.
- Once the SmartCrystal™ Cinema receives the synchronization signal, the SYNC LED will
illuminate in blue as follows:
•Blue continuous light: signal for 2D synchronization (less than 96Hz)
•Blue blinking light: signal for 3D synchronization (greater than 96Hz)
LED number 4: POWER SUPPLY
This LED is blue when the system is properly powered and off when the system is not
powered.
Remote control6.
Will be developed later
BNC connector 7.
The BNC connector allows the user to synchronize the SmartCrystal™ Cinema Neo with
the cinema projector. Three cables are supplied with the SmartCrystal™ Cinema Neo:
BNC/BNC cable (2 meters long) BNC/GPIO 15 cable (2 meters long) BNC/GPIO 37 cable (2
meters long)
Connect the power cable to SmartCrsytal™ Cinema8.
Power IN

9
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
Snap hook9.
To increase safety, please use the snap hook when fixing the SmartCrystal™ Cinema Neo.
Easy maintenance10.
To facilitate the maintenance, you can operate the frame manually. It allows you to
easily clean the LCD from dust for example.
a. Unscrew 2 following screws
b. Fix the handle to the LCD frame with
the two screws you have just remove
When you want to get back to
the automatic mode you have
to push the LCD’s frame toward
the inside till you feel the
mechanical connection.
Then check that the LED number
2 isn’t red.

10
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
V. SMARTCRYSTAL CINEMA NEO BRACKET
Before installing the SmartCrystal™ Cinema Neo in front of the projector lens, make sure you have
all the needed tools and the instruction manual. This wall fixing part is provided with all the screws
and wall anchors you might need.

11
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
VI. INSTALLATION
The SmartCrystal™ Cinema Neo should be placed directly in front of the lens of the
projector at a distance such that the image from the projector covers as much as
possible the entire area of the polarization window in order to minimize thermal heating
effects.
Ensure that the side of the SmartCrystal™ Cinema marked “PROJECTOR SIDE” is facing
towards the projector.
The SmartCrystal™ Cinema polarization module must be placed at least 80mm (4 inches)
away from the projector lens.
The distance between the lens and the LCD should be over 80 mm (4 inches)
Try not to incline too much the LCD (LCD inclination increase the ghosting effect)

12
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
A. Phase one
B. Phase two

13
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
VII. TROUBLESHOOTING
PROBLEM
SOLUTION
The system does not work.
Verify that the Power LED is illuminated when working. If it
is OFF, this indicates that there is a problem with the
power-supply of the system.
Check that the SmartCrystal™ Cinema Neo electronic
module is correctly mounted in the bracket.
Check that the power supply is connected and that the
system is in the power ON state.
Should the error persists, please contact your technical
support.
SYNC LED does not
illuminate.
Ensure the sync cable is connected to the SmartCrystal™
Cinema Neo Polarizer Module.
Red continuous light.
(Sync LED)
The system is powered but there is no synchronization
signal. Ensure the 3D mode is selected in the setup of your
3D source.
The LED flashes correctly but
no 3D images are shown.
(Sync LED)
Ensure the SmartCrystal™ Cinema Neo is facing the right
way (i.e the side marked PROJECTOR SIDE should be
facing the projector).
Check that the projection screen is 3D-compliant (silver
screen with gain 2,4), content is 3D, and the projector is
running in 3D mode.
The LED for “state motor”
illuminates in red.
In such case, please contact directly your reseller or
integrator.
Do not touch the electronics of the SmartCrystal™
Cinema Neo.
The LED for “state fan” lights
in red.
In such case, please contact directly your reseller or
integrator.
Do not touch the electronics of the SmartCrystal™
Cinema Neo.
The LED number 2 is red
Fix the handle as describe page 9. Pull out the LCD’s
frame at the maximum then push the LCD’s frame
toward the inside till you feel the mechanical
connection.

14
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
VIII. SOFTWARE UPDATE
The latest software is available on Volfoni website to update your product. How to use the
software update:
•Go to Volfoni website (www.volfoni.com)
•Choose the menu SERVICES/SUPPORT
•Download the software VOLFONI LOADER
•Connect your computer to SmartCrystal™ Cinema Neo with the cable USB-A /USB-B
(cable supplied with your SmartCrystal™ Cinema Neo)
•Turn on your SmartCrystal™ Cinema Neo
•Verify that the software recognizes your system
•Once the SmartCrystal™ Cinema Neo is connected, press CHECK FOR UPDATE
•Load the latest version if it’s not already on your SmartCrystal™ Cinema Neo
IX. IMPORTANT SAFETY RECOMMENDATIONS
•Protect all parts of the 3D system from direct sunlight, heat or water.
•Extreme conditions may alter the product’s performance.
•Do not modify the electrical or mechanical components of your 3D system
•Do not apply force to the window of the polarization modulator.
•Do not touch the polarization window.
•Avoid vibrations and shock.
•Use a clean soft cloth when cleaning the polarization modulator to avoid scratching.
•Always transport the SmartCrystal™ Cinema Neo system with the window of the
SmartCrystal™ Cinema Neo Polarizer Module returned into its encasement to avoid
scratching the LCD or the frame.
•In case of problems with the cooling ventilation system, turn off the projector, and contact
your technical support.
•In case of damage to the SmartCrystal™ Cinema Neo where the skin is exposed to liquid
crystal material, we recommend that you immediately wash the area with soap and
water.
•In case of eye exposure to liquid crystal material, please seek medical advice
immediately.
•Please note that passive 3D glasses must not be used as sunglasses.
X. WARRANTY
The SmartCrystal™ Cinema Neo is protected under warranty to the original purchaser for
three (3) years according to local legislation. Equipment (modules and cables) should be
returned in their original packaging along with the original proof of purchase. Equipment
that is broken or scratched is not covered. The SmartCrystal™ Cinema may become

15
SmartCrystal™ Cinema Neo
n ° : MUV160028
Version : A07
USER MANUAL
Date : 13/09/2017
damaged if it is placed in front of the projector-lens such that the image from the
projector does not cover as much as possible the entire area of the polarization-window
(see section “Installation”). Damage caused by placing the SmartCrystal™ Cinema too
close to the projector lens is not covered by the warranty. Volfoni does not guarantee
uninterrupted or error-free operation of the product.
XI. FURTHER INFORMATION
NOTICE:
The Volfoni Group reserves the right to make changes to the hardware, packaging or
other documentation without prior written notice. SmartCrystal™ Cinema is a trademark
of the Volfoni Group.
All trademarks are the property of their respective companies. www.volfoni.com
XII. REGULATORY STANDARDS
European Union - Disposal information:
This symbol means that according to local laws and regulations your product should be
disposed of separately from household waste. When this product reaches the end of its
life, take it to a collection point designated by local authorities. Some collection points
accept product for free. The separate collection and recycling of your product at the
time of disposal will help preserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment.
- This Class B digital apparatus complies with Canadian ICES-003.