3
China
Warning/Safety Information
This manual cannot address all safety hazards. It is the responsibility of the user
to consult and observe all health and safety precautions and to assess the
suitability of the sealer for the task.
Package Contents
• 1 heat sealer
• 2 extra blades
• 2 heating elements
• 2 PTFE cloths
Unpacking and Installation
1. Remove all packing materials from the unit.
2. Plug the unit into the outlet.
3. See Operating Instructions for use.
1. Read the instruction manual
before operating the sealer and
cutter.
2. Observe general laboratory safety
precautions and regulations.
3. Follow all precautions from the
Material Safety Data Sheet (MSDS)
for any reagent you use with this
sealer.
4. Never operate the sealer in
a hazardous or flammable
environment.
5. To protect against risk of electrical
shock, do not put sealer in water
or other liquid.
6. Blade is extremely sharp. Keep
hands, hair, clothing and other
utensils away from blade during
operation.
7. Always work in a manner which
neither endangers the user, nor
any other person.
8. Unplug the unit from the outlet
before changing parts or cleaning.
9. Only use original manufacturer’s
accessories and spare parts.
10. Do not pull, twist or otherwise
abuse the power cord. Never carry
the sealer by the cord or pull from
the cord to remove from an outlet.
Always grasp the plug and pull to
disconnect from an outlet.
11. Repairs are to be performed by
trained and authorized service
personnel only.
