Xitrix XPN-DTV5519U User manual

Please read this manual carefully for proper usage before installation and use. It is recommended
to keep this manual properly for future check. The pictures in this manual are only for reference.
LED TV
󴠊󶐓󵤙󰿖󲓎󳤏󵌉󰿭󳓥󰿵V

1
Contents
Thanks for choosing the high-performance and
multifunctional intelligent LED TV produced by our
company. This precious thing will bring you better
audiovisual enjoyment. The design of this product has
given consideration to factors affecting personal safety,
and the product itself has gone through strict tests prior
to delivery. However, improper operation may result in
electric shock and fire disaster. To ensure safety,
prolong the service life of this product, and make sure
the best performance of this product can be given full
play to, please read the manual and marking label
carefully before using it and comply with the following
safety instructions. Please keep the user manual for
later use.
Safety Warning and Notice
Warning
Attention
Indicate the behaviors that must be
prohibited
Indicate the operations that must be
performed
May result in casualties
May result in personal injury or
property losses
Under Following Conditions
Power failure or unstable voltage.
Abnormal sound or smell from the device.
AC power cord is damaged.
TV set is damaged due to falling off, knock or impact.
Any liquid or foreign matters enter
into the TV set.
If coal gas or other flammable gases leak, do not
unplug the power cord of the TV set or other
electric appliances; instead, close the valve of
the gas immediately and open the doors and
windows.
●
●
●
●
●
●
Turn off the TV set immediately,
unplug the power cord from the
power outlet, and contact
authorized maintenance personnel.
● 100- AC,
supply.
● This TV must be connected to a three pin
socket outlet for safety.
● All cables can be connected or pull out
only after power supply is turned off.
● Do not fix the TV set on instable position,
or else it may cause falling off, damage, or
even
● Do not put the TV set in the environment:
1. With direct sunshine, moisture,
overheating, undercooling or heavy
dust;
2. With flammable or explosive substance;
3. With flammable or corrosive gas;
4. In bathroom, kitchen, etc.
● Do not use damaged or improper power
socket, and ensure that the plug and
socket are connected properly.
● Keep the power plug and socket free of
dust and metal pieces.
● Do not damage the power cord:
1. It is prohibited to refit the power cord;
2. Do not put heavy object on the power
cord;
3. Keep the power cord away from heat
source;
4. Do not drag the power cord when
unplugging.
Only use 240V 60/50Hz power
fire.
Warning
Safety Warning and Notice……………………………1
Mounting and Connecting…… ……… …… ……… …3
Mounting the TV set…………… ………… …………3
Connecting peripheral equipment…………………4
Panel Control Keys……………………………………5
Remote Control…………………………………………6
Basic Operations……………… ……………… ………7
Turning on/Standby…………………………………7
Signal source selection………………………………7
Menu operation description…………………………7
Program scanning……………………………………8
REC option……………………………………………8
………………………………………8
……
Basic Operations……………………………………9
Quick Start……………………………………………9
Smart Applications……………………………………9
Network Settings……………………………………10
… … …
Troubleshooting………………………………………12
Technical Specifications……………………………13
Packing List……………………………………………3
Base Installation Instructions………………………14
Time Shift option
Instructions for Intelligent Platform Operation 9
Important Statement on Network Services 11

Attention
2
● To adjust the position or angle of the TV set,
please disconnect all wires and move slowly
to avoid falling off.
● Do not rub with hard object, knock at, bend or
squeeze the screen.
● Do not use machine immediately after
transfering machine to the places with high
temperature from low temperature, which will
cause fogging inside machine and failures.
● If the screen is broken and the liquid
splashes on skin, please wash with clean
water immediately for 15 minutes, and go to
see your doctor.
● To carry the TV set with hands, please grasp
the corners and hold the bottom; do not apply
force on the panel.
● Displaying the same image for a long time or
active image with fixed words, icons will
leave "image persistence" on screen which
will not disappear after powering off for a
long time. This undesirable phenomenon is
not covered by warranty.
● Healthy TV watching:
1. Watch in appropriate light; poor light or
long time watching may hurt your eyes.
2. Adjust the volume appropriate to avoid
hurting your hearing.
● Unplug the power cord of the device to cut off
the power supply.
● If a power plug or appliance coupler is used
as disconnecting device, it should ensure
easy operation.
● Power plug shall be connected reliably. Loose
power plugs may cause sparkle and fire.
● All the technical specifications in the user’s
manual and on the packaging are subject to
changes without prior notice. If there is slight
deviation between the user’s manual and
actual operation, the latter shall prevail.
Warning
●
●
●
●
Do not let children climb onto the TV set.
Keep the small accessories away from
children's reach to avoid swallowing.
If the TV set won't be used for a long time,
please turn off the device and unplug the
power cord.
Before cleaning the TV set, unplug the power
cord and wipe with soft cloth; do not use
chemical reagents and avoid foreign
substances entering into the device. The
incorrect cleaning (such as cleaning fluid,
water, etc) may lead to damage of product's
appearance, erasing products printing
information, even flow into the machine and
damage components, cause machine can not
display.
● Do not connect too many appliances to
one power strip, or else it may cause fire
due to high power consumption.
● Do not let open flame (e.g. lit candle)
approach the TV set, or else it may cause
electric shock or fire.
● Do not put the container filled with water
on the TV set, to avoid electric shock or
fire caused by water drop of splashing.
● Do not penetrate any sharp object, metal
or liquid into the signal connector or air
vents, to avoid short circuit and product
damage as well as electric shock.
● The slots on the case is designed to
release heat so as to assure that all inside
components will not reach an extra high
temperature and can work normally for a
long time. Please do not cover the holes
while place it.
Do not touch the plug with wet hands, or else
it may cause electric shock.
Do not turn on the TV set in thunderstorm
weather; instead, unplug the power plug and
antenna connector to avoid lightning strike.
Do not disassemble the TV set by yourself,
or else it may cause electric shock or fire.
Contact qualified personnel for maintenance.
Attention

3
Mounting the TV set Ventilation
Tips on Installation
The TV set should be mounted near the AC power
socket for easy plugging and unplugging.
For your safety, please select appropriate wall
mount bracket or base.
To avoid hurt, it is required to place the TV set on
stable plane, or fix on firm wall.
Ask qualified personnel to mount the TV set on the
wall. Improper mounting may result in instable TV
set.
Do not place the TV set at any place susceptible to
mechanical vibration.
Do not place the TV set at any place that insects
may enter.
Do not mount the TV set against air conditioner, or
else the internal panel of the display may condense
moisture and cause failure.
Do not place the TV set at any place with strong
magnetic field, or else it may be interfered with and
damaged by electromagnetic wave.
●
●
●
●
●
●
●
●
● Please keep this space at least around the TV, as
shown in the figure.
● Do not cover the air vents or insert any object into
the enclosure.
Do not put the device in limited space, e.g.
bookcase or embedded closet, unless the TV set is
properly ventilated.
●
Mounting and Connecting
Warning
Never place a television set in an unstable location. A
television set may fall, causing serious personal
injury or death. Many injuries, particularly to children,
can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the
manufacturer of the television set.
Only using furniture that can safely support the
television set.
Ensuring the television set is not overhanging
the edge of the supporting furniture.
Not placing the television set on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should
be applied.
●
●
●
●
●
●
Obstruct the air circulation
Wall
10cm
30cm
10cm
10cm
Mount on the wall
7cm
Obstruct the air circulation
Wall
Mount on the base
10cm
30cm
10cm
1. The TV set.
2. User Manual.
3. Remote control.
4. Power cord (or attached to TV set).
5. AV transfer cable.
Packing list

To power socket
(100-240VAC, 60/50Hz)
4
Remark:
1. USB interfaces support peripheral equipment,
including USB camera, USB mass storage device,
USB mouse, keyboard, etc.
2. AV and COMPONENT share same audio input
function.
3. When you need to connect the device which support
the ARC function, please select the HDMI-1
interface. (ARC function is optional, and please
refer to the device.).
4. HDMI connector can realize DVI connector function
with external HDMI/DVI commutator.
5. The number of HDMI and USB interface are
variable, please according to the configuration of
machine.
6. The peripheral equipment and cables described in
this manual should be purchased separately.
R F
Warning
When connecting outdoor antenna to signal port
of the TV set, please turn off the main power
switch of the TV set first. Do not approach the
outdoor antenna to high voltage mains power
line to avoid electric shock. The wired network
antenna connected to this TV set must be
isolated from the protective grounding, or else it
will cause fire or other hazards.
HDMI 2 Input HDMI 1 Input PC Input Network Input
Earphone Port
G Green (Y signal cable)
B Blue (Pb/Cb signal cable)
Y Yellow(VIDEO signal cable)
W White(AUDIO-L signal cable)
O Orange (Coaxial signal cable)
R Red (AUDIO-R and Pr/Cr signal cables)
HDMI 3 Input
O
Coaxial Output
R
B
USB 1 Interface
USB 2 Interface
G
W
YR
AV Input
WR
WR
Y
Component
Input
Connecting peripheral equipment

5
Panel Control Keys
Remark:
①. The appearance varies depending on the model,
and the actual product shall prevail.
②. In smart mode, please operate with the remote
control.
1) Power LED indicator and remote receiving window.
2) Power switch(optional): press '' I '' end to turn
power on, and press ''O'' end to turn power off.
3) (SOURCE): Press this key to enter the menu to
select signal source; during OSD menu operations,
press this key to confirm the operation, with the
same function as the [OK] key on the remote
control.
4) (CH-/CH+): Channel down/up key; during
OSD menu operation, press the keys to select
items, with the same function as the [▼]/[▲] key on
the remote control.
5) (VOL-/VOL+): Volume down/up key;
during OSD menu operation, press the keys to
adjust the analog value, with the same function as
the [t]/[u] key on the remote control.
6) (MENU): Press this key to show the setup menu.
7) Standby: To switch the TV on or back to standby.
2
7
6
5
43
1

Keys
Power ( )
SNAPSHOT
( )
MUTE ( )
Number keys
OPTION
Home ( )
MENU ( )
OK
VOL+/-
Return ( )
SOURCE
CH+/-
INFO
GINGA
(optional)
REC LIST ( )
T-SHIFT ( )
REC ( )
CH LIST ( )
FAV ( )
GUIA(optional)
GUIA BACK
(optional)
MTS ( )
EPG ( )
Red key
Green key
Yellow key
Blue key
t,u▲ ▼, ,
Function
Switch between working and standby
status.
Capture the screen.
Turn on/off the sound.
Select the channel or input numbers.
Display option menu.
Decimal point.
Show the home page of smart TV.
Show the OSD menu.
Select items or adjust values.
Confirm the operation.
Turn up/down the volume.
Return to previous page.
Select the signal source.(only in TV mode)
Change program channel.
Show the information of the TV program.
Turn on/off the GINGA function.
Press this button to return to last watching
channel.
Display record list.(PLAY)
Time shift key. (PAUSE)
Record program. (STOP)
TV: display the channel list;
Multimedia player: return to last;
Record/Time-shift function: backward 30s.
favorite channel list;
Turn on GINGA Applications, press [OK]
key to confirm, press [ ] key to exit
GINGA Applications
Return to previous page. (only for GINGA)
TV: display
Multimedia player: enter next;
Record/Time-shift function: forward 30s.
ATV: select NICAM mode;
DTV: select audio language.
(Fast Backward)
Electronic channel instructions.
(Fast Forward)
Special function key for Electronic
Program Guide menu.
Keys of the Remote Control
Note: The appearance of the remote control may
be different from this diagram; please refer to the real
object as standard.
Remote Control
6

Method for Installation of Remote Control
Battery
Remove the battery compartment cover and insert
two AAA (No. 7, 1.5V) batteries; make sure the polarity
of the batteries is in compliance with the polarity mark
''+'' and ''-'' in the battery compartment of the remote
control.
Precautions for using the remote control
● The remote control should be pointed at the
remote control sensor during operation. An
object placed between the remote control and
the remote control sensor may impede normal
operation.
● The remote control should be prevented from
strenuous vibration. Besides, please do not set
or place the remote control under direct
sunshine, as heating power may result in
deformation of the remote control.
● Remote control failure may occur when the
remote control sensor of the main unit is under
direct sunshine or strong lighting; in this case,
please change the angle of lighting or this TV
set, or operate the remote control near the
remote control sensor.
● Low battery will influence the remote control
distance, in which case, the battery should be
replaced with a new one. If the remote control is
going to be idle for a long time or the battery
runs out, please take the battery out to prevent
the remote control from being corroded by
battery leakage which may result in damage and
failure of the remote control.
● Please do not use batteries of different types. It
is not allowed to use old and new batteries
together; the batteries should be replaced in
pair.
● Please do not throw the batteries into fire or
charge or decompose the batteries; do not
charge, short-circuit, disassemble/assemble,
heat or burn used batteries. Please dispose the
waste batteries pursuant to relevant regulations
on environmental protection.
Basic Operations
Remark:
1. The keys operation refers to remote control
operation, for panel control keys operation
please refer to ''Panel Control Keys'' operation
explanation.
2. Menu Operation Instruction in this manual is
explained according to TV mode. The operations
in other modes are similar to the one in TV
mode, and users can take it as reference.
Turning on/Standby
Before power-on platform, please make sure that
the power supply is stable.
Plug power cord into the electrical socket. Press
'' '' button on the TV set (If it doesn't have this button,
you needn't operate this step), then press [ ] key to
turn on the TV. When the first power on ,the screen
display ''Welcome'' menu, Press [▲]/[▼] key to select
language which you wish, then select START and
press [OK] key to confirm, the machine start auto
tuning after you select country.
In power on state, press [ ] key to switch to
standby mode.
★ Special Tips: This device adopts energy saving
technology. If there is no signal input in power on
state, it will enter standby state automatically in five
minutes; The device will enter standby state
automatically at specified sleep time;
Signal source selection
You can connect various devices to the TV set and
view high quality images. If the video device has
HDMI, AV, PC and other video output ports. You can
select one of them and connect to corresponding input
ports of the TV set. After connected, turn on the device
and press [SOURCE] key, then menu of signal source
will be displayed on the screen. Press the [▲]/[▼]/[t]/
[u] key to select the input signal, and press [OK] key
to confirm .
Menu operation description
Press [MENU] key to show the main menu on the
screen:
1. Press [▲]/[▼]key to select a menu from
Parental Control, Setting, Channel, Sound,
Picture
7

Tuning, Press [OK] key to enter ATV Manual Tuning
menu, Press [▲/[▼] key to select
Channel/Frequency, and then press [t]/[u] key to
search. During manual turning, you can press [MENU]
key to interrupt the search and return to the last menu.
After turned, you can press [RED] key to save current
program .
REC option
In DTV program, Press [REC] key, REC option
menu shows on the screen, and system begin
recording right now. Press [REC] key to stop and quit
recording; After quit recording, press [REC LIST] key,
the recorded list will pop up, select the file you want to
play, then press [OK] key to play it. While playing, you
can press INFO] key to display or hide tool bar.
Note: The recording function can only support
memorizer with FAT32 file system. Memorizer with
other file systems need to be formatted; Before
formatting memorizer, back-up useful data because
the content of memorizer can not recover after
formatting.
Time Shift option
In DTV program, Press [T-SHIFT] key, Time Shift
option menu shows on the screen and the program is
in suspended state. Press [REC LIST] key to resume
play program. Press [REC] key to stop and quit time-
shift.
[
When user leaves program for a short time, time-
shift function can suspend and cache the playing
program to U disk. When user resumes playing, the
program can continue to be played.
While playing, you can press [INFO] key to
display or hide tool bar.
8
2. Press [OK] key to confirm.
3. Press [▲]/[▼] key to select an item in the menu.
4. Press [OK] key to enter the submenu.
5. Press [t]/[u] key to adjust the value or setting.
6. When the main menu shows on the screen,
press [ ]/[MENU] key to exit the main menu;
Press [ ] key to return to previous menu when
the TV display the submenu.
7. Different signal sources have different menus.
During menu operation, the icons of invalid
options will change into grey.
Note: The default password for the lock system is
0000.
Program scanning
Tune the programs before watching the TV for the
first time. Before scanning, please make sure that the
antenna has been connected properly .
Auto Tuning
Press [MENU] key, Select Channel > Auto Tuning,
Press [OK] key, then press[▲]/ [▼][t]/[u] key to
select country, Press [OK] key to confirm, the machine
start auto tuning. During auto tuning, the screen
display ''Are you sure to exit AIR DTV tuning?'' by
pressing [MENU] key, press [t] key to select YES and
press [OK] key to confirm, the machine start auto
tuning AIR ATV channel or press [u] key to select NO
and press [OK] key to cancel. During auto tuning AIR
ATV channel, the screen display ''Are you sure to exit
AIR ATV tuning?'' by pressing [MENU] key. press [t]
key to select YES and press [OK] key to confirm, the
machine start auto tuning CABLE channel or press [u]
key to select NO and press [OK] key to cancel. During
auto tuning CABLE channel, the screen display ''Are
you sure to exit CABLE tuning?'' by pressing [MENU]
key, press [t] key to select YES and press [OK] key to
confirm or press [u] key to select NO and press [OK]
key to cancel.
DTV Manual Tuning (In AIR signal source)
Press [MENU] key, Select Channel > DTV Manual
Tuning, Press [OK] key to enter DTV Manual Tuning
menu, Press [t]/[u] key to select channel, then press
[▼] key to select Search and press [OK] key to
confirm. During the search you may press [MENU] key
to interrupt the search and return to the last menu.
ATV Manual Tuning
Press [MENU] key, Select Channel > ATV Manual
Icon Description
Play: Play or set A-B repeat.
Stop: Stop and quit.
Pause: Pause.
Step: Step by step, press [REC LIST] key
to play normally.
Rev: Fast back, press [REC LIST] key to play
normally.
FF: Fast forward, press [REC LIST] key to
play normally.
Time Play: Select time to play.
Backward: Make a 30S jump backward.
Forward: Make a 30S jump forward.

9
Basic Operations
Press [ ] key on the remote control to show the
home page.
1. Press [▲]/[▼]/[t]/[u] key to select an
application;
2. Press [OK] key to run the application;
3. Press [ ] key to return to previous page;
★ Special Tips
The operations in smart mode are complicated.
The user can install Apps with different operation
methods, and the operations described in this manual
are for reference only. Part of applications need
external equipment to run normally. Certain functions
are invalid from the remote control. For more
convenient operation, please operate with USB mouse
and keyboard.
Quick Start
Before using this device, please get familiar with
the operations below for better experience.
Mouse Control
1. Click: Click the mouse and release immediately;
2. Press and hold: Click the mouse and hold for at
least three seconds;
3. Clicking the left mouse key has the same effect
as pressing [OK] key on the remote control;
4. Clicking the right mouse key has the same effect
Instructions for Intelligent
Platform Operation
as pressing [ ] key on the remote control.
Language input setting
Language: elect the system
language. Select Settings > Preferences >
Language, and press [OK] key; press [▲]/[▼] key to
select the desired language, and then press [OK] key.
Selecting Input Method: In the smart mode,
select Settings > Preferences > Keyboard >Current
Keyboard , and press [OK] key then press [▲]/[▼] key
to choose input method in the submenu; you can also
download and install third party input method.
Setting System Time: In the smart mode,
select Settings > Preferences > Date & time >
Automatic date & time, press [OK] key then press
[▲]/[▼] key to select ''Use network-provided time''
press [OK] key to confirm and the system update the
clock from the network automatically; if the TV set isn't
connected to the network, you can only set the system
time manually.
Screenshot: Before screen shooting, please
insert the USB mass storage device into the USB
interface, and press [SNAPSHOT] key. After screen
shooting, the pictures are saved in the
":\Pictures\Screenshots" folder in the USB mass
storage device.
Smart Applications
Browser: You can use the browser to show the
text, video, audio and other information on the
Internet.
Before accessing the Internet, please connect your
TV set to the Internet; refer to “Network Settings" for
details.
In the smart mode, s
Input box for URL.
Option for adding a bookmark.
7
8
Close the current webpage window.
Add a new webpage window.
5
6
Back to the previous webpage.
Go forward to the next webpage.
Refresh the webpage.
Webpage window of the browser.
1
2
3
4
Icon Description
Play: Play or set A-B repeat.
Stop: Stop and quit.
Pause: Pause.
Step: Step by step, press [REC LIST] key
to play normally.
Rev: Fast back, press [REC LIST] key to play
normally.
FF: Fast forward, press [REC LIST] key to
play normally.
Time Play: Select time to play.
Backward: Make a 30S jump backward.
Forward: Make a 30S jump forward.

10
■ How to access web address?
Press [▲]/[▼]/[t]/[u] key to select the address
bar, and type the web address in the address bar, then
select the【Go】icon in the input method, and press
[OK] key to access the web address.
■ How to save a page in the Bookmark?
Select the icon the browser interface, and press
[OK] key to enter the browser tab and web address.
Select Account, and press [OK] key. Press [▲]/[▼]
key to select the account for storage, and then press
[OK] key. Select OK, and then press [OK] key to add
the bookmark.
■ How to copy and paste the text in the web
page?
Place the cursor on the text to copied, press and
hold the left mouse key. When the pair of selecting
cursors appears on the screen, drag the cursor to
select the text. Select COPY on the screen, and click
the left mouse key. Select the target position, press
and hold the left mouse key, and click PASTE in the
popup dialog box.
Apk Installer: The Apk installer helps users
manage applications, and allows users to install or
uninstall apps in local disk.
Note: Select Settings > Personal > Security
& restrictions > Unknown sources to allow
installation of app from unknown sources.
■ How to install an application?
Select All App, press [OK] key to enter Apk
Installer, select Install and press [OK] key to enter;
Select the path of the target installation file in local
disk, locate the installation package in the right panel,
and then press [OK] key.
■ How to uninstall an application?
Select Manage, and press [OK] key to enter. Select
the application to be removed, and press [OK] key.
Select Uninstall, click [OK] key, and the system will
uninstall the application automatically.
Multimedia Player: In smart mode, select
Multimedia in the main interface, and press [OK] key
to run. Select the file type from All, Picture, Music and
Video in the left.
■ Playing Files in local disk device: Before
playing files in the local disk, insert the USB mass
storage device into the USB interface.
Input option of URL.
Menu option of browser.
Option for viewing bookmark.
11
10
9
Select local disk device in the file directory in the
center, and press [OK] key to enter. Select Back in the
directory, press [OK] key to return to previous folder.
Select the target folder, press [OK] key to enter the
folder, and press [ ] key to return to the desktop.
Attention:
1. Nonstandard USB devices can't be recognized
probably; in this case, please replace a standard
USB device;
2. The stream media system has certain restriction
on the format of files; the playing will be
abnormal if it is out of the system restriction;
3. Do not remove the USB device while playing, or
else the system or device may have problem;
Before replace the USB device, please turn off
the machine's power supply;
4. The system supports standard USB1.1 and
USB2.0 devices, such as USB mass storage
devices and removable hard disks;
5. The maximum output current of the USB port of
this device is 500mA, and the self-protection will
be enabled if it is beyond this limit; please use
external power supply if an external device of
higher current will be connected;
6. The system is complicated; when it is reading or
playing files, the screen may be still or certain
functions may be invalid due to the compatibility
and stability of the USB device; in this case,
please turn off the device and re-initialize the
system.
Press [INFO] key can display or hide toolbar. While
playing, select the menu option which you want, and
press [OK] key to perform the operation; you can press
[ ] key to exit playing, or press [ ]/[ ]/[ ]/[ ], [
] key on the remote control to perform shortcut
operation.
Network Settings
Wi-Fi
1. In smart mode, select Settings > Device >
Network, press [OK] key, then press [▲]/[▼] key
to chose Wi-Fi, press [OK] key to confirm, then
press [OK] key enter the menu of Wi-Fi , press
[▲]/[▼] key to select "on" or "off" and the
machine automatically search for nearby
wireless network signal when it is on state. When
the network has searched icon indicate that
machine connects to the network without a
password. When searching for the network to
have icon indicate that the network is
encrypted, must enter the correct password to

11
connect to the network .
2. Select the network which you want to select in
the network list, and press [OK] key;
3. Type network connecting password in the
Password box.
4. Select Next and press [OK] key to connect to the
network.
Ethernet: (Dial to connect to the network)
1. Select Settings > Device > Network > Ethernet
and press [OK] key;
2. If your devices does not support automatically
obtain an IP address, you need to select
Advanced options > IP settings > STATIC, and
press [OK] key to confirm;
3. Enter the IP address, Gateway, Network Prefix
Length and other information; (IP address,
gateway, network prefix length and other
information available to the relevant network
administrator);
4. Select To Connect again and press [OK] key to
connect to the network.
Portable hotspot
Tip: Close Wi-Fi before you use
1. Select Settings > Device > Network >
Portable hotspot and press [OK] key;
2. Select Portable Wi-Fi hotspot, press [OK] key
to check the open Wi-Fi hotspot functionality;
3. Select Set up Wi-Fi hotspot, press [OK] key;
4. Enter the hotspot name in the network name
field; the system recognizes it as "AndroidAP".
5. In the security field, press [OK] key to select
security type, when it is an open network it do
not need a password to connect to the network,
security type selected as None. But any search
to your network devices can connect to the Wi-Fi
network, if you select WPA2 PSK encryption, you
need to enter a password more than eight
characters, if other devices search out your
shared Wi-Fi network, they need to enter the
5. If your devices does not support automatically
obtain an IP address, you need to select
Advanced options > IP settings > STATIC, and
press [OK] key to confirm;
6. Enter the IP address, Gateway, Network Prefix
Length and other information; (IP address,
gateway, network prefix length and other
information available to the relevant network
administrator);
7. Select To Connect and press [OK] key to
connect to the network.
Wi-Fi hotspot.
correct password to connect to your network;
6. You can type a password in the password frame
for yourself;
7. Select SAVE and press [OK] key to save the
settings, then other Wi-Fi devices in search for
Wi-Fi networks will search your network in the
area.
ll contents and services obtained from this TV set
belong to the third party and are protected by laws on
copyright, patent right, trademark right and/or other
intellectual property right. The said contents and
services are only for your non-commercial purposes. It
is not allowed to use any content or service without the
authorization of the content owner or the service
provider.
Our company will undertake no liability for any
direct, indirect and accidental losses or damages
caused by your or a third party's access to any content
or service or any information or any third party
software through this set under any circumstances.
Third party service may be changed, deleted or
stopped without prior notice. Our company neither
implies nor guarantees the continuous availability of
some service or content within any period of time.
Our company is not held responsible for services
related to the said service and content. Besides, we
will not bear any liability for client service. Please
directly contact relevant content and service providers
if you have any problem and service request
concerning relevant service or content.
Important Statement on
Network Services

12
Troubleshooting
■ Snowflake spots occur in the TV images and
there is noise in accompanying sound.
1. Check if the antenna plug is loose or the cable is
in good condition.
2. Check the antenna type (VHF/UHF).
3. Adjust the direction and position of the antenna.
4. Try to use signal enhancer.
■ There is neither display nor sound on the screen.
The indication light is not on.
1. Check if the power line is connected.
2. Press the " " button on the TV.
■ Dotted line or strip disturbance occurs in TV
images.
Do not use electric hair dryer aside the TV
set and adjust the antenna direction to reduce
disturbance.
■ Double images occur on the TV screen.
1. Use high oriented antenna.
2. Adjust the direction of the antenna.
■ The images are colorless.
Enter "Picture" setting to adjust saturation.
■ The TV has no accompanying sound.
1. Adjust the volume to a proper degree.
2. Press [MUTE] key on the remote control to cancel
mute mode.
■ No signal input images show on the machine
screen. The indicator light is on.
1.Check if the signal connecting cable is loose or
falls off. Reconnect it.
2.The machine may be in standby mode, please
reboot.
■ Images displayed on the PC deviate. The screen
is not full or is exceeded. The display is fuzzy.
1. Use automatic adjustment function.
2. Enter "PC Image Mode" adjustment level or
vertical position.
3. Use the recommended mode.
■ The remote control distance is short or out of
control.
1. Remove the object to avoid blocking the remote
control receiving window.
2. Replace the battery.
■ The browser cannot access any link.
1. Ask the network administrator to obtain available
IP address and other parameters.
2. Check if the network connecting cable is normally
connected.
3. Consult the network service provider.
■ Online video play is very slow.
1. Please upgrade your network bandwidth to a
higher one.
2. Please try to replace with other addresses to
obtain better resources.
■ Machine is slow, system crash, can't operate the
machine.
Disconnect the power supply first, and connect the
power supply after about 1-2 minutes, then turn on
the TV again.

13
Technical Specifications
Master unit
Technical specifications for TV
1. Supported standard:
ATV: PAL M/N, NTSC M.
DTV: ISDB-T.
2. Antenna input: 75Ω coax, unbalanced.
3. AV video input: 75Ω, 1±0.1Vp-p, RCA terminal.
4. AV audio input: 20KΩ, 0.2~2Vrms.
5. HDMI video input: 480i, 480P, 576i, 576P, 720P,
1080i, 1080P, 2160P.
6. Specific internal memory capacity in accordance
with actual configuration.
7. Specific cache capacity in accordance with actual
configuration.
8. Wireless connection: Wi-Fi (IEEE 802.11 b/g/n).
9. Intelligent operating system: Android.
Dimension (L H W) and Weight× ×
Max. Resolution
Power Supply
Power Consumption of Speaker
Operating environment:
Temperature
RH
Atmospheric pressure
Storage environment:
Temperature
RH
Atmospheric pressure
3840×2160
100-240VAC 60/50Hz
8W+8W
℃ ℃
℃ ℃
5 ~40
10%~85%
86kPa~106kPa
-20 ~55
5%~95%
86kPa~106kPa
720×480i/p
720×576i/p
1280×720p
1920×1080i/p
3840×2160p
SD
1
2
3
4
5
6
7
8
9
10
11
UHD
60Hz
50Hz
50Hz
60Hz
50Hz
60Hz
24Hz
25Hz
30Hz
50Hz
60Hz
HD
Remark: Under UHD ode, 50Hz nd 60Hz efresh ate s
ffective nly nder DMI ersion 2.0.
m a r r i
e o u H v
NO. Resolution Refresh rate
Mode
HDMI display mode
Video mode
55"
Excluding base 3
Unpacking: 1241×720×83(mm )
3
Unpacking: 1241×776×261(mm )
3
Packing: 1355×824×175(mm )
Net Weight: 12.9kg
Gross Weight: 16.4kg
Including base
Power management
Mode
Normal working
Standby
Power Consumption
≤155W
≤0.5W
VGA
SVGA
720×400
640×480
800×600
1024×768
1280×720
1280×1024
1360×768
1600×900
1920×1080
WXGA
XGA
1
2
3
4
5
6
7
8
9
NO.
WUXGA
Mode Resolution
Recommended mode:1920X1080@60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Refresh rate
VGA display mode
SXGA
640×480
800×600
1024×768
1280×1024
1600×900
1920×1080
VGA
1
2
3
4
5
6
7
8
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
30Hz
60Hz
SVGA
XGA
WXGA
WUXGA
NO. Resolution Refresh rate
Mode
VGA mode
4K 3840×2160
Remark: Under 4K ode, 60Hz efresh ate s ffective nly
nder DMI ersion 2.0.
m r r i e o
u H v
SXGA

14
Base Installation Instructions
Put machine flat first, distinguish left and right base
and base installation front and back direction, then
install base in bottom of machine back cover as arrow
direction in figure, align positioning hole column of top
base and positioning column hole of bottom of
machine back cover, align screw holes, then fasten
screws (notice that base module has to be adjusted at
figure status, otherwise it cannot be installed in.)
/
/
Base-R
Base-L
Remark: The actual base and machine appearance
may be different from pictures; please refer to the
actual device.
Screws