2MamaBees Oceano Operating and maintenance manual

2MamaBees Inc.
www.2mamabees.com
[email protected]
833-MAMABEE (626-2233)
Oceano Playhouse Assembly Guide & Warranty
Please Read and Retain this document
Includes warranty replacement instrucons and important safety informaon
Contents
Warnings
Maintenance
Assembly Prep
Tools and Part Inventory
Step-by-Step Assembly

Warnings and Safe Play
Warnings and FAQs
Read this enre manual before assembling the playhouse.
Keep manual aer assembly to easily order replacement parts or to disassemble properly.
Assembly requires two adults. If necessary, seek professional help to assemble if you are uncertain
about any of the steps listed.
Prepare recommended area before beginning assembly.
Please see “Assembly and Layout” for further information.
Playhouse must be completely assembled and inspected for sharp edges or protruding hardware before
use by children. Failure to do so may result in injury and/or voiding of warranty.
Missing or damaged parts? Please email [email protected] or call 833-MAMABEE (626-2233).
(You will need Playhouse Model and part number. Playhouse Model is found on the front page of this manual and part
numbers and descriptions are listed on each page).
Proper Use
• Playhouse is intended for children aged 2 to 10 years of age.
• Playhouse is designed for indoor or outdoor use in private at-home settings only.
• Playhouse is not intended for public or business use (such as daycare, preschool, nursery, or other
commercial applications). Any use of this sort will void warranty.
Safe Play
To reduce the risk of injury of death, you must follow these instructions:
• Adult supervision required at all times when the playhouse is being used.
• Adults should check for damaged wood, missing or loose hardware, or any sharp edges before every
use. Replace, tighten and smooth rough edges between uses. Lubricate any moving parts when
needed.
• Children should be dressed in well tting clothes and wearing closed toed shoes when using
playhouse.
• Children should not wear bicycle or sports helmets or any headgear with chinstrap to avoid catching
on playhouse.
• Adults should ensure the playhouse is on a at and level surface and does not rock due to an uneven
spot. Check the depth of surface under and around the playhouse regularly. Add material to maintain
minimum required depth and rake to keep level. See Assembly and Layout for more information.
• Check surface temperatures on hot days to ensure plastic, metal and wood surfaces could burn
children during use. Surfaces can be cooled with water. Wipe everything dry before use.
• If surfaces are wet, dry them off before use as there is a risk of child slipping and falling.
• Do not let children climb on roof of playhouse.

Warranty and Maintenance
Maintenance
• As part of safe play, we recommend daily checks of playhouse before used by children.
• All wood parts are made from weather tolerant cedar and sealed with a water-based sealant.
Weathering from seasonal changes and other outdoor exposure will cause moisture content of
the wood to shift and cause cracking, warping, and fading. While these changes will not impact
the integrity of the product, we advise regular maintenance to slow the speed and amount of
weathering.
• In order to slow normal weathering and ensure warranty is not voided, it is required that a layer
of sealant be applied to all wood surfaces every 1-2 years (yearly for areas that are humid and hot,
every 2 years for areas that are dry. Before sealing, lightly sand wood pieces where there might be
rough spots. This will reduce the rate of fading.
Limited Warranty
All products carry a 1-year replacement warranty on all parts for manufacturer’s defect (which covers
wood, hardware, and accessories). Our wood carries a 5 year warranty on rot and decay as well.
This Limited Warranty does not cover:
• Labor for any inspection
• Labor for replacement of any defective item(s)
• Incidental or consequential damages
• Cosmetic defects which do not affect performance or integrity of a part or the entire product
• Vandalism, theft, improper use, failure due to loading or use beyond the capacities stated in the
applicable Assembly Manual.
• Acts of nature including but not limited to wind, earthquake, storms, hail, oods, res, excessive
water exposure
• Improper installation including but not limited to installation on uneven, unleveled, or soft ground
• Minor twisting, warping, cracking, or any other natural occurring properties of wood that do not
affect performance or integrity
2MamaBees Playhouses have been designed for safety and quality. Modications beyond painting could
damage the structural integrity of product and lead to injury from product failure. Any modications will
void all warranties and guarantees.
Part Replacement -
• Cost of parts (damaged or missing) will be covered by 2MamaBees for the rst year. This includes
Shipping & Handling.
• All replacement parts after rst year of ownership will be charged as follows - Discount on parts will
decrease by 20% for every year of ownership of playhouse. (Ex - Year 1 customer pays 20% of cost,
Year 2 customer pays 40%, and so on). All shipping and handling will be covered by customer.
• Warranty is voided if use in any non-residential setting such as playgrounds, parks, daycares, or
business settings.
• Warranty is non-transferable
This Warranty gives you specic legal rights. You may have other rights as well which vary from state to
state or province to province. This warranty excludes all consequential damages, however, some states
do not allow the limitation or exclusion of consequential damages and therefore this limitation may not
apply to you.

Assembly and Surface Preparation
House*
(reference only, not exact)
6'-0" 6'-0"
6'-0"
6'-0"
SAFE PLAY ZONE
SAFE PLAY ZONE
Posioning the Playhouse
Playhouse is designed to be utilized on a level surface with at least 6 feet of open surface that is free of
any obstruction. In order to prepare play area before beginning assembly:
• Consider locating the playhouse in an area that is convenient for adults to watch children at play.
• Remove any obstacle such as tree stumps and roots, branches, bushes, and large rocks from the play
area.
Recommended Play Area Surfaces
• After prepping playhouse area and installing playhouse, it is recommended to add a layer of shock
absorbing material around playhouse. If used properly these materials can absorb some of the
impact of a child’s fall.
• We recommend the following types of surfaces: Shredded wood products and mulch, shredded tires,
ne or coarse sand, or gravel
• Minimum recommended depth of materials should be 6 inches.
• Overtime, shock-absorbing materials will compact and shift. When this happens additional material
should be added and surfaces raked by an adult to maintain consistent thickness around entire
playhouse.
• Please consult a landscaping professional on the required amount of material needed to meet the
minimum requirement of nal compressed thickness.
Do not install on any hard surface (ex - concrete or asphalt) Doing so increases risk of serious head and
other injuries from tripping or falling. Mats,outdoor carpet, and loose ll over hard surfaces do not have
sufcient padding to reduce risk of use on hard surfaces. Do not use these options.

Disposal
Playground Surfacing Materials Appendix A
Disposal Instrucons:
When the playhouse use is no longer desired, it should be disassembled and
disposed of in such a way that no unreasonable hazards will exist at the time
the unit is discarded.
APPENDIX A
Information on Playground Surfacing Materials:
e following information is from the United States Consumer Product Safety
Commission’s Information Sheet for playground surfacing material; also
see the following website for additional information:.
www.cpsc.gov/cpscpub/pubs/323.html
X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS11
X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing
protective surfacing under and around your play equipment. e protective surfacing should be applied to a depth that is suitable for the equipment height in
accordance with ASTM Specication F 1292. ere are dierent types of surfacing to choose from; whichever product you select, follow these guidelines:
X3.1.1 Loose-Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-ll materials such as wood mulch/chips, engineered wood ber (EWF), or shredded/recycled rubber
mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial ll level of 12 inches will compress
to about a 9-inch depth of surfacing overtime. e surfacing will also compact, displace, and settle, and should be periodically relled to maintain at least a
9-inch depth.
X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At
depths less than 6 inches, the
protective material is too easily displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface.
A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environ-
mental factors can reduce their shock absorbing eectiveness.
Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equip-
ment that has no elevated play surface – does not need any protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to account for water drain-
age.
X3.1.3.1 Check and maintain the depth of the loose-ll surfacing material. To maintain the right amount of loose-ll materials, mark the correct level on play
equipment support posts.at way you can easily see when to replenish and/or redistribute the surfacing.
X3.1.3.2 Do not install loose-ll surfacing over hard surfaces such as concrete or asphalt.
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-ll materials – like rubber
tiles or poured-in-place
surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects.
X3.1.4.2 Review surface specication before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been
tested to the following safety standard: ASTM F 1292 Standard Specication for Impact Attenuation of Surfacing Materials within the Use Zone of Playground
Equipment. is report should show the specic height for which the surface is intended to protect against serious head injury. is height should be equal
to or greater than the fall height – vertical distance between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective
surfacing below – of your play equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
Owner’s Manual Play House
OWNER PH-2011
11is information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Play-
ground Safety.”
Copies of these reports can be obtained by sending a postcard to: Oce of Public Aairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207
or call the toll-free hotline: 1-
800-638-2772.
e American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned
in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such
rights, are entirely their own responsibility. e standard is subject to revision at any time by the responsible technical committee and must be reviewed every
ve years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and
should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you
may attend. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards. 100
Barr Harbor Drive, West Conshohocken, PA 19428.

Bolt 1/4x1-1/4in
Door Handle
Large Square
Tape Measure
Claw Hammer
Cordless Drill or Electric Drill
Rubber Mallet
Screw Driver
24” Level
QUANTITY 18
L-Bracket
Hinge - 2
i
Victoria Playhouse Instruction Book （Client）
Parts Identification
S1 SCREW：1.1cm
S2 SCREW：1.5cm
S3 SCREW：2.5cm
S4 SCREW：4cm
S5 SCREW：5cm
S6 SCREW：7cm
90°L-BRACKET X18 Door
handle X1
x0
x84
x70
x10
x4
x52
x2
QUANTITY 70
S3 Screw - 1 1/8in
QUANTITY 52
S4 Screw - 1 1/4in
QUANTITY 10
S5 Screw - 1-1/2in
QUANTITY 4
S6 Screw - 1 3/4in
QUANTITY 84
S2 Screw - 1in
Necessary Tools (Not Included)
Hardware Included
Inventory Immediately. Missing a part? Call 833-626-2233

Wooden Components & Accessories
QTY 1 - Faucet Kit
QTY 1 - Stove Kit
QTY 1 - Wood Knife
QTY 1 - Cutting Board
QTY 1 - Sink
i
Victoria Playhouse Instruction Book （Client）
Parts Identification
S1 SCREW：1.1cm
S2 SCREW：1.5cm
S3 SCREW：2.5cm
S4 SCREW：4cm
S5 SCREW：5cm
S6 SCREW：7cm
90°L-BRACKET X18 Door
handle X1
x0
x84
x70
x10
x4
x52
x2
QTY 1 - Basket with assorted
wooden foods
V7
V1
V6
V13
V12
V33 V34
V24
V23
V22
V21
V20 x2
V25
V19 x2
V17 x2
V16
V15
V14
V29 V26
V27 V30
V18
V28
V9 V10 V31 x4
V39
V2 V3
V4 V5
V37
V38
V11
V32 x2
V8
V35
V36
Inventory Immediately. Missing a part? Call 833-626-2233

STEP 1:
PARTS
HARDWARE
QUANTITY 6
L-Bracket
QUANTITY 24
1 in. S2 Screw
V2 V3
V5
V5

STEP 2:
PARTS
HARDWARE
QUANTITY 24
1 in. S2 Screw
QUANTITY 6
L-Bracket
V1
V4

PARTS
HARDWARE
STEP 3:
V18
V39 QUANTITY 4
S5 Screw - 1-1/2in
QUANTITY 8
S3 Screw - 1 1/8in

STEP 4:
PARTS
HARDWARE
QUANTITY 1
S3 Screw - 1 1/8in
QUANTITY 5
S4 Screw - 1 1/4in
V19
V17
V16

STEP 5:
PARTS
HARDWARE
V19
V17
V15
QUANTITY 1
S3 Screw - 1 1/8in
QUANTITY 5
S4 Screw - 1 1/4in
V7 V8

STEP 6:
PARTS
HARDWARE
QUANTITY 19
S3 Screw - 1 1/8in
QUANTITY 19
S2 Screw - 1in
V6 V9
QUANTITY 4
L-Bracket

STEP 7:
PARTS
HARDWARE
QUANTITY 18
S3 Screw - 1 1/8in
V24
V23
V22
V21
V25 V29 V26
V27 V30 V28
STEP 8:
PARTS
HARDWARE
QUANTITY 8
S3 Screw - 1 1/8in
V25 V29 V26
V27 V30 V28

STEP 8:
PARTS
HARDWARE
QUANTITY 8
S3 Screw - 1 1/8in
V25 V29 V26
V27 V30 V28

PARTS
HARDWARE
STEP 9:
V23
V21
V10 QUANTITY 4
S3 Screw - 1 1/8in
QUANTITY 2
S4 Screw - 1 1/4in

PARTS
HARDWARE
STEP 10:
QUANTITY 8
S3 Screw - 1 1/8in
V24
V22 V20 x2

PARTS
HARDWARE
STEP 11:
V13
V11
QUANTITY 2
S3 Screw - 1 1/8in
QUANTITY 3
S5 Screw - 1-1/2in
QUANTITY 2
S2 Screw - 1in
QUANTITY 1
L-Bracket

PARTS
HARDWARE
STEP 12:
V12 QUANTITY 16
S4 Screw - 1 1/4in
QUANTITY 4
S5 Screw - 1-1/2in
QUANTITY 4
S2 Screw - 1in
QUANTITY 1
L-Bracket
V31 x4
Playhouse Assembly
S2 SCREW：
1.5cm
Door
Handle
A18

PARTS
STEP 13:
V33 V34
V14 V37
V38
V32 x2
V35
V36
V33
V34
HARDWARE
Hinge - 2
QUANTITY 8
S3 Screw - 1 1/8in
QUANTITY 16
S4 Screw - 1 1/4in
QUANTITY 8
S2 Screw - 1in
Aspen Playhouse Instruction Book （Client）
Parts Identification
S1 SCREW：1.1cm
S2 SCREW：1.5cm
S3 SCREW：2.5cm
S4 SCREW：4cm
S5 SCREW：5cm
S6 SCREW：7cm
90°L-BRACKET
Door
Handle
x2
x1
x18
x0
x89
x56
x9
x0
x2
Playhouse Assembly
S2 SCREW：
1.5cm
Door
Handle
A18
Bolt 1/4x1-1/4in
Door Handle
STEP 15:
PARTS
HARDWARE
QUANTITY 6 S3 Screw
Aspen Playhouse Instruction Book （Client）
Parts Identification
S1 SCREW：1.1cm
S2 SCREW：1.5cm
S3 SCREW：2.5cm
S4 SCREW：4cm
S5 SCREW：5cm
S6 SCREW：7cm
90°L-BRACKET
Door
Handle
x2
x1
x18
x0
x89
x56
x9
x0
x2
PARTS
HARDWARE
STEP 14:
QUANTITY 4
S6 Screw - 1 3/4in