ACONATIC 55US534AN User manual

55US534AN

AV - I N
VIDEO AUDIO-L AUDIO-R
HDMI-1HDMI-2HDMI-3Coaxial-OUT
LAN
HDMI 2 Input
R
AV Input
W
Y
Network Input
HDMI 1 Input
O
Coaxial Output
(ARC)
HDMI 3 Input
(100-240VAC, 60/50Hz)
TV
(DVB-T/T2/C)
AUDIO-OUT
USB-2
USB-1
VGA
USB1/USB2 Interface
Audio Output
RF
PC Input

Power ( )
Mute ( )
Number keys
LIST
AD
16:9
YouTube
SOURCE
NETFLIX
Home ( )
Menu ( )
OK
Return ( )
Exit ( )
INFO
, , ,
Red key
Green key
Yellow key
Blue key
VOL+/-
CH+/- ( )
EPG
AUDIO
SUBTITLE
TTX
T-SHIFT ( )
(play)
Record ( )
REC LIST ( )
YouTube
NETFLIX

0

2 x M6 ( L≤30+L1),28+L1≤
2 x M6 (6+L1'≤L'≤9.5+L1')

1
Contents
Thanks for choosing the high-performance and
multifunctional intelligent LED TV produced by our
company. This precious thing will bring you better
audiovisual enjoyment. The design of this product has
given consideration to factors affecting personal safety,
and the product itself has gone through strict tests prior
to delivery. However, improper operation may result in
electric shock and fire disaster. To ensure safety,
prolong the service life of this product, and make sure
the best performance of this product can be given full
play to, please read the manual and marking label
carefully before using it and comply with the following
safety instructions. Please keep the user manual for
later use.
Safety Warning and Notice
Warning
Attention
Indicate the behaviors that must be
prohibited
Indicate the operations that must be
performed
May result in casualties
May result in personal injury or
property losses
Under Following Conditions
Power failure or unstable voltage.
Abnormal sound or smell from the device.
AC power cord is damaged.
TV set is damaged due to falling off, knock or impact.
Any liquid or foreign matters enter
into the TV set.
Turn off the TV set immediately,
unplug the power cord from the
power outlet, and contact
authorized maintenance personnel.
If coal gas or other flammable gases leak, do not
unplug the power cord of the TV set or other
electric appliances; instead, close the valve of
the gas immediately and open the doors and
windows.
●
●
●
●
●
●
● 100- AC,
supply.
● This TV must be connected to a three pin
socket outlet for safety.
● All cables can be connected or pull out
only after power supply is turned off.
● Do not fix the TV set on instable position,
or else it may cause falling off, damage, or
even fire.
● Do not put the TV set in the environment:
1. With direct sunshine, moisture,
overheating, undercooling or heavy
dust;
2. With flammable or explosive substance;
3. With flammable or corrosive gas;
4. In bathroom, kitchen, etc.
● Do not use damaged or improper power
socket, and ensure that the plug and
socket are connected properly.
● Keep the power plug and socket free of
dust and metal pieces.
● Do not damage the power cord:
1. It is prohibited to refit the power cord;
2. Do not put heavy object on the power
cord;
3. Keep the power cord away from heat
source;
4. Do not drag the power cord when
unplugging.
Only use 240V 60/50Hz power
Warning
Safety Warning and Notice……………………………1
Mounting and Connecting……………………………3
Packing list……………………………………………3
Mounting the TV set…………………………………3
Connecting peripheral equipment… … … … … … …4
Panel Control Keys……………………………………5
Remote Control…………………………………………6
Basic Operations………………………………………7
Turning on/Standby…………………………………7
Signal source selection………………………………7
Menu operation description…………………………8
Smart TV………………………………………………8
OSD Language setting………………………………8
Program scanning……………………………………8
REC option……………………………………………8
Time shift option………………………………………8
App……………………………………………………8
Network settings …………… … …………… … ……9
Important statement on network services…………9
Multimedia player……………………………………9
Troubleshooting………………………………………10
Technical Specifications……………………………10
Base Installation Instructions………………………11
Use of a TV wall mounting…………… ……… ……12
55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2

Attention
2
● To adjust the position or angle of the TV set,
please disconnect all wires and move slowly
to avoid falling off.
● Do not rub with hard object, knock at, bend or
squeeze the screen.
● Do not use machine immediately after
transfering machine to the places with high
temperature from low temperature, which will
cause fogging inside machine and failures.
● If the screen is broken and the liquid
splashes on skin, please wash with clean
water immediately for 15 minutes, and go to
see your doctor.
● To carry the TV set with hands, please grasp
the corners and hold the bottom; do not apply
force on the panel.
● Displaying the same image for a long time or
active image with fixed words, icons will
leave "image persistence" on screen which
will not disappear after powering off for a
long time. This undesirable phenomenon is
not covered by warranty.
● Healthy TV watching:
1. Watch in appropriate light; poor light or
long time watching may hurt your eyes.
2. Adjust the volume appropriate to avoid
hurting your hearing.
● Unplug the power cord of the device to cut off
the power supply.
● If a power plug or appliance coupler is used
as disconnecting device, it should ensure
easy operation.
● Power plug shall be connected reliably. Loose
power plugs may cause sparkle and fire.
● All the technical specifications in the user’s
manual and on the packaging are subject to
changes without prior notice. If there is slight
deviation between the user’s manual and
actual operation, the latter shall prevail.
Warning
●
●
●
●
Do not let children climb onto the TV set.
Keep the small accessories away from
children's reach to avoid swallowing.
If the TV set won't be used for a long time,
please turn off the device and unplug the
power cord.
Before cleaning the TV set, unplug the power
cord and wipe with soft cloth; do not use
chemical reagents and avoid foreign
substances entering into the device. The
incorrect cleaning (such as cleaning fluid,
water, etc) may lead to damage of product's
appearance, erasing products printing
information, even flow into the machine and
damage components, cause machine can not
display.
● Do not connect too many appliances to
one power strip, or else it may cause fire
due to high power consumption.
● Do not let open flame (e.g. lit candle)
approach the TV set, or else it may cause
electric shock or fire.
● Do not put the container filled with water
on the TV set, to avoid electric shock or
fire caused by water drop of splashing.
● Do not penetrate any sharp object, metal
or liquid into the signal connector or air
vents, to avoid short circuit and product
damage as well as electric shock.
● The slots on the case is designed to
release heat so as to assure that all inside
components will not reach an extra high
temperature and can work normally for a
long time. Please do not cover the holes
while place it.
Do not touch the plug with wet hands, or else
it may cause electric shock.
Do not turn on the TV set in thunderstorm
weather; instead, unplug the power plug and
antenna connector to avoid lightning strike.
Do not disassemble the TV set by yourself,
or else it may cause electric shock or fire.
Contact qualified personnel for maintenance.
Attention
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
The terms HDMI and HDMI High-Definition Multimedia
55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2

3
Mounting the TV set Ventilation
Tips on Installation
The TV set should be mounted near the AC power
socket for easy plugging and unplugging.
For your safety, please select appropriate wall
mount bracket or base.
To avoid hurt, it is required to place the TV set on
stable plane, or fix on firm wall.
Ask qualified personnel to mount the TV set on the
wall. Improper mounting may result in instable TV
set.
Do not place the TV set at any place susceptible to
mechanical vibration.
Do not place the TV set at any place that insects
may enter.
Do not mount the TV set against air conditioner, or
else the internal panel of the display may condense
moisture and cause failure.
Do not place the TV set at any place with strong
magnetic field, or else it may be interfered with and
damaged by electromagnetic wave.
●
●
●
●
●
●
●
●
● Please keep this space at least around the TV, as
shown in the figure.
● Do not cover the air vents or insert any object into
the enclosure.
● Do not put the device in limited space, e.g.
bookcase or embedded closet, unless the TV set is
properly ventilated.
Mounting and Connecting
1. The TV set.
2. User Manual.
3. Remote control.
4. Power cord (or attached to TV set).
Packing list
Obstruct the air circulation
Wall
10cm
30cm
10cm
10cm
Mount on the wall
7cm
Obstruct the air circulation
Wall
Mount on the base
10cm
30cm
10cm
Warning
Never place a television set in an unstable location. A
television set may fall, causing serious personal
injury or death. Many injuries, particularly to children,
can be avoided by taking simple precautions such as:
● Using cabinets or stands recommended by the
manufacturer of the television set.
● Only using furniture that can safely support the
television set.
● Ensuring the television set is not overhanging
the edge of the supporting furniture.
● Not placing the television set on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
● Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
● Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should
be applied.
55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2

55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2
AV - I N
VIDEO AUDIO-L AUDIO-R
HDMI-1HDMI-2HDMI-3Coaxial-OUT
LAN
HDMI 2 Input
R
AV Input
W
Y
Network Input HDMI 1 Input
Remark:
1. When you need to connect the device which support
the ARC function, please select the HDMI-1
interface.
2. HDMI connector can realize DVI connector function
with external HDMI/DVI commutator.
3. The peripheral equipment and cables described in
this manual should be purchased separately.
Connecting peripheral equipment
Yellow (VIDEO signal cable)
White (AUDIO-L signal cable)
Red (AUDIO-R signal cables)
Orange (Coaxial signal cables)
Y
W
R
OWarning
When connecting outdoor antenna to signal port
of the TV set, please turn off the main power
switch of the TV set first. Do not approach the
outdoor antenna to high voltage mains power
line to avoid electric shock. The wired network
antenna connected to this TV set must be
isolated from the protective grounding, or else it
will cause fire or other hazards.
O
Coaxial Output
4
To power socket
(100-240VAC, 60/50Hz)
TV
(DVB-T/T2/C)
AUDIO-OUT
USB-2 USB-1
VGA
USB1/USB2 Interface
Audio Output
R F
PC Input
(ARC)
HDMI 3 Input

5
Panel Control Keys
1) Power LED indicator and remote receiving window.
2) Standby: To switch the TV on or back to standby,
the function is the same with pressing [ ] key on
the remote control.
3) Menu key: Press this key to display the main
menu. In OSD menu operation, press this key to
return to the previous menu, the function is the
same with pressing [MENU] key on the remote
control.
4) Rocker button combination key:
Press OK Rocker:
①. In non-OSD menu operation, press OK rocker to
enter source menu, the function is the same with
pressing [SOURCE] key on the remote control.
②. In OSD menu operation, press OK rocker to
confirm operation, the function is the same with
pressing [OK] key on the remote control.
Move rocker Up/Down:
①. In TV mode, move rocker Up/Down to
increase/decrease the channel number, the
function is the same with pressing [CH+]/[CH-]
key on the remote control.
②. In OSD menu operation, move rocker Up/Down
to select the adjustment items, the function is
the same with pressing [p]/[q] key on the
remote control.
Move rocker Left/Right:
①. In non-OSD menu operation, move rocker
Left/Right to decrease/increase the volume, the
function is the same with pressing[VOL-]/[VOL+]
key on the remote control.
②. In OSD menu operation, move rocker Left/Right
to adjust the analog value of selected item, the
function is the same with pressing [t]/[u] key
on the remote control.
Remark:
①. The appearance varies depending on the model,
and the actual product shall prevail.
②. In smart mode, please operate with the remote
control.
1
Right
Down
Up
Left
2
3
4
55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2

6
Remote Control
Method for Installation of Remote Control
Battery
Remove the battery compartment cover and insert
two AAA (No. 7, 1.5V) batteries; make sure the polarity
of the batteries is in compliance with the polarity mark
''+'' and ''-'' in the battery compartment of the remote
control.
Keys of the Remote Control
Keys
Power ( )
Function
Switch between working and standby
status.
Mute ( ) Turn on/off the sound.
Number keys
LIST
AD
16:9
YouTube
SOURCE
NETFLIX
Home ( )
Menu ( )
OK
Return ( )
Exit ( )
INFO
Select the channel or input numbers.
Show channel list.
Turn on/off the associated audio.
Switch the zoom mode.
Open YouTube application.
Show signal source menu.
Open Netflix application.
Show home page.
Show OSD menu.
Return to previous menu page, or return
to previous channel.
Exit OSD menu or application.
Show information bar.
t,u,▲,▼Select items or adjust values.
Confirm the operation.
Red key
Green key
Yellow key
Blue key
Special function keys.
VOL+/-
CH+/- ( )
Turn up/down the volume.
Change program channel.
EPG
AUDIO
SUBTITLE
TTX
Electronic program guide.
Select audio language.
Select subtitle language.
Open / Close teletext.
T-SHIFT ( ) Time shift key. (PAUSE)
Fast backward.
Fast forward.
Play function in multimedia.
(play)
Record ( ) Start to record current program.
REC LIST ( ) Show PVR list. (STOP)
Note: The appearance of the remote control may
be different from this diagram; please refer to the real
object as standard.
55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2

7
Basic Operations
Remark:
1. The keys operation refers to remote control
operation, for panel control keys operation
please refer to ''Panel Control Keys'' operation
explanation.
2. The [u] key means direction key and the
[u](play) key means play function key
3. Menu Operation Instruction in this manual is
explained according to TV mode. The operations
in other modes are similar to the one in TV
mode, and users can take it as reference.
4. Before power-on platform, please make sure that
the power supply is stable.
Turning on/Standby
Before power-on platform, please make sure that
the power supply is stable.
Plug power cord into the electrical socket, then
press [ ] key to turn on the TV. The first time you turn
on the TV, the "Welcome" menu will be displayed on
the screen. Press [p]/[q] key to select OSD language
which you wish and press [u] key to next step. The
Data collection and firmware updates notice will be
displayed on the screen, you can accept it or decline it
according to your situation. Then you need to set the
country, timezone and TV mode. Finally, follow the
prompts to operate the network configuration and auto
search, you can also choose to skip it temporarily.
Please press [ ] key if you want to return to the
previous page during the process.
In power on state, press [ ] key to switch to
standby mode.
★ Special Tips: This device adopts energy saving
technology. If there is no signal input in power on
state, it will enter standby state automatically in ten
minutes; The device will enter standby state
automatically at specified sleep time;
Signal source selection
You can connect various devices to the TV set and
view high quality images. If the video device has
HDMI, AV, PC and other video output ports, you can
select one of them and connect to corresponding input
ports of the TV set. After connected, turn on the device
and press [SOURCE] key, then menu of signal source
Precautions for using the remote control
● The remote control should be pointed at the
remote control sensor during operation. An object
placed between the remote control and the remote
control sensor may impede normal operation.
● The remote control should be prevented from
strenuous vibration. Besides, please do not set or
place the remote control under direct sunshine, as
heating power may result in deformation of the remote
control.
● Remote control failure may occur when the
remote control sensor of the main unit is under direct
sunshine or strong lighting; in this case, please
change the angle of lighting or this TV set, or operate
the remote control near the remote control sensor.
● Low battery will influence the remote control
distance, in which case, the battery should be replaced
with a new one. If the remote control is going to be idle
for a long time or the battery runs out, please take the
battery out to prevent the remote control from being
corroded by battery leakage which may result in
damage and failure of the remote control.
● Please do not use batteries of different types. It
is not allowed to use old and new batteries together;
the batteries should be replaced in pair.
● Please do not throw the batteries into fire or
charge or decompose the batteries; do not charge,
short-circuit, disassemble/assemble, heat or burn used
batteries. Please dispose the waste batteries pursuant
to relevant regulations on environmental protection.
55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2

55EU 英文说明书(欧洲 6886方案 T8E主板)(Linux)(带Netflix)(三芯)V2.2
will be displayed on the screen. Press [t]/[u] key to
select the input signal, and press [OK] key to confirm.
Menu operation description
Press [ ] key to show the main menu on the
screen:
1. Press [p]/[q] key to select a menu from
Channel ,Picture, Sound, Network, System,
Lock, Timer, Support.
2. Press [OK]/ [u] key to enter the submenu.
3. Press [p]/[q] key to select an item in the menu.
4. Press [OK] key to confirm.
5. Press [t]/[u] key or [p]/[q] key to adjust the
value or setting.
6.Press [ ]/[ ] key to return to previous menu
when the TV displays the submenu.
7. During menu operation, the icons of invalid
options will change into grey.
Note: The default password for the lock system is
0000.
Smart TV
Press [ ] key to show the home page.
1. Press [t]/[u] key to select an application;
2. Press [OK] key to run the application;
3. Press [ ] key to return to previous page;
4.Press [EXIT] key to exit the smart mode.
Note: Before accessing the Internet, please
connect your TV set to the Internet. Refer to “Network
Settings" for details.
OSD Language setting
Press [ ] key, select System > Language and
press [OK] key to enter. Press [p]/[q] key to select
the desired language, and then press [OK] key.
Program scanning
Tune the programs before watching the TV for the
first time. Before scanning, please make sure that the
antenna has been connected properly .
Auto Search
Press [ ] key, Select Channel> Auto Tuning,
Press [OK] key, then set up the Tune Type and
Country according to actual needs. Select Search
and press [OK] key, then the machine starts auto
search. Press [ ] key, then select YES in the popup
window and press [OK] to skip current search and start
next search. Press [ ] key, then select YES in the
popup window and press [OK] to exit search. Select
NO and press [OK] key to continue.
DTV Manual Search
Press [ ] key, Select Channel> DTV Manual
Tuning, Press [OK] key to enter DTV Manual Tuning
menu. Press [t]/[u] key to select channel, then press
[p]/[q] key to select Search and press [OK] key to
confirm.
ATV Manual Tuning (In ATV signal source)
Press [ ] key, Select Channel> ATV Manual
Tuning, Press [OK] key to enter ATV Manual Tuning
menu, Press [p]/[q] key to select Current CH, and
then press [t]/[u] key to select which you wish, then
select Search and press [t]/[u] key to search.
REC option
In DTV mode, Press Record [ ] key, then the
system begins recording. Press [ ] key to stop and
quit recording.
Press [REC LIST] key to display the record files
and play them.
While playing, press [ ]/[ ]/[ ](play)/[ ]/[ ] key
to handle.
Note: The recording function can only support
memorizer with FAT32 file system. Memorizer with
other file systems need to be formatted; Before
formatting memorizer, back-up useful data because
the content of memorizer can not recover after
formatting.
Time shift option
When user leaves program for a short time, time-
shift function can suspend and cache the playing
program to U disk. When user resumes playing, the
program can continue to be played.
In DTV mode, Press [T-SHIFT] key, Time Shift
option menu shows on the screen and the program is
in suspended state. Press [ ](play) key to resume play
program. Press [ ] key to stop and quit time-shift.
While playing, press [ ]/[ ]/[ ](play)/[ ]/[ ] key
to handle.
APP
Press [ ] key, then press [t]/[u] key to select an
application and press [OK] key to enter. As to Youtube
and Netflix, you can press the [YouTube] and
[NETFLIX] key to use them. In the standby mode, you
can turn on the TV and use Netflix by pressing
[NETFLIX] key on the remote control.
8