active fun Knightswood Double & Deck TP826 Quick guide

TP826
Knightswood Double & Deck
TP827
Knightswood Double/Deck
& Extension
Instructions for assembly, maintenance and safe use.
Please retain for future reference.
Robovision Ltd t/a TP Toys
Unit 11, Enterprise Way, Flitwick, Bedfordshire, MK45 5BX England
www.tptoys.com
THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS.
CONTAINS SMALL PARTS. CHOKING HAZARD.
ONLY FOR DOMESTIC USE. FOR OUTDOOR USE.
TOY MUST BE ASSEMBLED BY AN ADULT BEFORE USE.
ADULT SUPERVISION IS REQUIRED
CHILDREN MUST NOT USE THE EQUIPMENT UNTIL PROPERLY INSTALLED.
REMOVE ALL PACKAGING BEFORE GIVING TO YOUR CHILDREN.
THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 3 TO 12 YEARS.
ANCHORS THAT ARE SUPPLIED WITH THIS PRODUCT MUST BE FITTED BEFORE USE.
MAXIMUM COMBINED USER WEIGHT FOR SWING FRAMES 200KGS
WARNING!
x2
TP826 Knightswood
Double & Deck
TP827 Knightswood
Double/Deck & Ext
Build Time
2.5 Hrs
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 1 27/02/2018 15:57

TP826 & TP827
2
276cm 124cm
179cm
340cm
382cm
119cm
240cm
340cm
Important advice for assembly, maintenance and safe use
1. Toys must be assembled by an adult before use exactly in accordance with the instructions.
2. Check all parts are present before you start to assemble the product.
3. Place small parts on a tray or similar, to ensure they are not lost.
4. If any parts are missing do not use the product until the replacement parts are fitted.
5. Remove all packaging before giving to your children or allowing them to play with this product.
6. Ensure your product is sited on level ground. Failure to do this may put additional stress on connections and joints
and in time could cause them to fail.
7. Ensure your product is located on a soft impact surface like grass. Never locate your product on hard surfaces like
concrete or asphalt.
8. Children must not use this product until properly installed.
9. Adult supervision is required at all times to ensure children play safely. Ensure children’s clothing is appropriate for
the play activity.
10. Equipment should be checked by an adult at the beginning of each season and at regular intervals during the
usage season to ensure it is safe.
11. Pay special attention to all connections and fastenings.
12. Parts may need to be replaced if they show signs of wear and tear. Replace any defective parts in accordance
with these instructions.
13. Any changes to this toy, e.g. changing or adding an accessory, must be done in accordance with our instructions.
Failure to do this will render your guarantee null and void and may make your product unsafe.
14. The age recommendation for this product is clearly stated on the packaging and these instructions. Please adhere
to it at all times.
15. When you dispose of this equipment please do so responsibly.
Safe play free space area
The safe play area refers to the zone extending 200cm
around the toys on all sides and 250cm above the toy.
The safe play area must be free from all obstacles.
Dimensions
TP826 Knightswood
Double & Deck
TP827 Knightswood
Double/Deck & Ext
2m
2m
2m
2m
2m
2m
TP826
TP827
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 2 27/02/2018 15:57

TP826 & TP827
3
Know Your TP Round Wood.
Timber is a very popular choice for active outdoor toys. For reasons of affordability and the environment, all wood playset
manufacturers use softwood rather than hardwood. Each piece of timber is unique, bearing its own knots, cracks and
variations in colour.
Round timbers tend to come from younger smaller trees and are complete tree poles, stripped of any bark and other
rough materials but subject to no further processing apart from the application of a suitable environmentally friendly
preservative.
Our round wood frames are rustic in appearance. The heartwood that they are made from naturally has cracks and
splits. Theses cracks will change over time due to atmospheric conditions. When wet, the wood will take in water, swell
and the cracks will close up (not disappear), when dry the wood contracts and the cracks will open up.
Whilst this can sometimes seem alarming, the round timber frames are designed and dimensioned to ensure these
natural characteristics do not have an impact upon the structural integrity of the frame. All of our wooden play frames
are rigorously tested by an independent test house and fully comply with the relevant toy safety regulations.
Because of the natural characteristics of such wood products, it is vital that parents check their play frame regularly to
identify any splintering or lifting of the surface layers of the wood or any exposure of rough wood due to changes in
cracks and splits. Affected areas must be rubbed down using coarse sandpaper to restore a smooth. Safe surface.
Very occasionally these characteristics can develop to a point where replacing the pole may be required. This can be if a
crack is in a particular position or if a crack exceeds certain parameters. Examples of this are:
• Where cracks open up in excess of 5mm in width.
• Where cracks of a significant width extend over half the total length of the timber.
• Where cracks run through fixing points.
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 3 27/02/2018 15:57

4
TP826 & TP827
3mm & 5mm
Drill Bits
Step Ladder Spirit LevelTape MeasureMallet Combi Drill
Pozi #2
Pozi #3
Screwdriver Wrench
Sockets
10 & 13mm
Spanner
10 & 13mm
MW0223 700mm x14
MW0226 1550mm x2
MW0225 612mm x3
MW0224 850mm x4
MW0221 825mm x2
MW0220 1015mm x2
MW0219 1210mm x2
MW0218 1400mm x2
MW0222 2668mm x4
Not Supplied
Also
Required:
MW0228 795mm x1
Tools - You will need:
Contents please check:
Shovel
MW0203 2250mm x1
MW0200 2700mm x2
MW0202 900mm x1
MW0201 3000mm x1
MW0200 2700mm x2
MW0202 900mm x1
826-1 Double & Deck / 827-1 Double/Deck & Ext885-1
885-2
885-3
886-3
826-2 Double & Deck / 827-2 Double/Deck & Ext
826-3 Double & Deck / 827-3 Double/Deck & Ext
827-3 Double/Deck & Ext
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 4 27/02/2018 15:57

5
TP826 & TP827
6 x 155mm FA9784
x6
M8 x25mm
FA8440
x28
M8
FA5174
x4
70mm FA8439
x20
4.5 x 40mm FA4517
x60 5 x 60mm FA9768 x2
M8 x 120mm FA9771
x4
5 x 80mm FA4521
x16
PM8387
x8
4 x 16mm
FA4527
x18
40mm FA8380
x4
PR7757
TP826 x4
TP827 x5
PR5069
x4 FB6052 x2 FB6051 x1
PM1007
x1
PM1968
x1
Please note: There may be some fixings left over after the assembly build.
826-4 / 827-4 Fixings - FK0780
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 5 27/02/2018 15:57

6
TP826 & TP827
TP826 & TP827 - Deck Assembly
FB6052
x2
70mm FA8439
x4
15mm
1300mm
120mm
1300mm
5mm
1
2
MW0228 795mm x1
MW0222 2668mm x2
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 6 27/02/2018 15:57

7
TP826 & TP827
1300mm
1300mm
3MW0222 2668mm x2
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 7 27/02/2018 15:57

8
TP826 & TP827
6 x 155mm FA9784
x6
MW0225
MW0225
MW0225
x6
60mm
60mm
MW0225
3-5mm
3-5mm
MW0225 3-5mm
4
5
3-5mm
MW0225 612mm x3 MW0226 1550mm x2
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 8 27/02/2018 15:57

9
TP826 & TP827
M8 x 120mm FA9771
x4
M8
FA5174
x4
70mm FA8439
x4
5mm
6
7
M8 x25mm
FA8440
x8
ASSEMBLY TIP
Step
ladders
required.
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 9 27/02/2018 15:57

10
TP826 & TP827
4.5 x 40mm FA4517
x28
13mm
13mm
1
2
3
4
5
6
7
8 9
10
11
12 13 14
8MW0223 700mm x14
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 10 27/02/2018 15:58

11
TP826 & TP827
5 x 80mm FA4521
x16
236mm
236mm
236mm
310mm
70mm
70mm
1
1
25mm
25mm
2
x8
1
1
1
1
1
1
1
3mm
9MW0224 850mm x4
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 11 27/02/2018 15:58

12
TP826 & TP827
4.5 x 40mm FA4517
x32
x2
600mm
1
4
3
2
10
MW0221 825mm x2
MW0220 1015mm x2
MW0219 1210mm x2
MW0218 1400mm x2
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 12 27/02/2018 15:58

13
TP826 & TP827
PM8387
x8
4 x 16mm
FA4527
x16
x8
11
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 13 27/02/2018 15:58

14
TP826 & TP827
FB6051
x1
PR7757
TP826 x4
TP827 x5
TP826 & TP827 - Swing Arm Assembly
70mm FA8439
x2
M8 x25mm
FA8440
x2
MW0203
12 MW0203 2250mm x1
MW0201 3000mm x1
13
5mm
TP826
TP827
MW0201
750mm
TP826
TP827
15mm
Make sure you thread the
required number of metal
collars (PR7757) onto your top bar
before the securing the bracket.
ASSEMBLY TIP
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 14 27/02/2018 15:58

15
TP826 & TP827
40mm
FA8380
TP826 x4
14 Locate your swing seats correctly:
TP826 Deck Swing Frame Configurations
2250mm
Swing position
445mm 610mm
645mm
30mm
325mm
Swing Leg
Deck Leg
Single Roped Seat
With single swing seat and single roped accessory
2250mm
Swing position Swing position
445mm 450mm 445mm
335mm
30mm
315mm
Swing Leg
Deck Leg
With 2 single swing seats
2250mm
Swing position
1410mm
325mm325mm
30mm
Swing Leg
Deck Leg
With 1 nest swing (120cm dia)
2250mm
900mm
645mm
30mm
Swing Leg
Deck Leg
550mm
Bracket for rigid
downtube Glide Ride
With 1 glide ride and 1 single roped accessory
2250mm
Swing position
680mm 445mm
385mm
30mm
Swing Leg
Deck Leg
550mm
Bracket for rigid
downtube Glide Ride
With 1 glide ride and 1 single swing seat
5mm
A
A
A
A
A
A
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 15 27/02/2018 15:58

16
TP826 & TP827
40mm
FA8380
TP827 x5
15 Locate your swing seats correctly:
TP827 Deck Swing Frame Configurations
3000mm
750mm
345mm 100mm
305mm
Deck Leg Swing Position Single Roped Seat
1410mm
Swing Leg
With 1 nest swing (120cm dia) and 1 single roped accessory
3000mm
750mm
445mm 450mm 445mm 345mm 100mm
Swing Seat Position Swing Seat Position
305mm
Deck Leg Single Roped Seat
Swing Leg
With 2 single swing seats and 1 single roped accessory
3000mm
750mm
730mm 445mm 385mm 100mm
Swing Seat Position
Deck Leg Swing Leg Single Roped Seat
500mm
Bracket for rigid
downtube Glide Ride
With 1 glide ride and 1 single swing seat and 1 single roped accessory
5mm
A
A
A
A
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 16 27/02/2018 15:58

17
TP826 & TP827
Generic view of Top Bar only.
Actual Top Bar will vary
depending on product purchased.
ASSEMBLY TIP
70mm FA8439 x2
M8 x25mm Washer
FA8440
x2
16 MW0200 2700mm x2
5mm
70mm FA8439
x2
M8 x25mm
FA8440
x2
17
5mm
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 17 27/02/2018 15:58

18
TP826 & TP827
70mm FA8439
x2
M8 x25mm
FA8440
x2
Generic view of Top Bar only.
Actual Top Bar will vary
depending on product purchased.
ASSEMBLY TIP
18
x2
Make sure that the fixing points
are centred on the legs.
ASSEMBLY TIP
5mm
MW0202 900mm x1
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 18 27/02/2018 15:58

19
TP826 & TP827
PM9753
x1 5 x 60mm FA9768
x2
19
Slide Attachment
Please refer to product
instruction manual supplied
with Slide for fixing.
IMPORTANT
ASSEMBLY TIP
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 19 27/02/2018 15:58

20
TP826 & TP827
TP826 & TP827 - Attaching Swing Accessories
20
IMPORTANT
ASSEMBLY TIP
Refer to separate Swing
accessory instructions supplied
with seat for correct fixing!
TP901 Skyride/TP933 Pirate Boat
TP940 Glide require
TP784 Duo Ride Brackets.
(optional purchase).
Requires TP784
Duo ride brackets..
TP826 827 Knightswood Double & Deck In8048-A 27.02.18 NEW.indd 20 27/02/2018 15:58