ADT PROPORT User manual
QUICK START GUIDE
BASIC INSTRUCTIONS
Power Up (boot) for the first time.
Remove right side back panel door to access power connector port. Connect included power cord to device
and then to an outlet.
Device will automatically boot/start up once connected to power through the provided adapter/cord. (If device
does not automatically boot, follow the procedures in the section for “Using the internal power button.”)
Using the internal power button (boot / wake / sleep / shutdown).
Hold the tablet in landscape orientation with the camera on top. The internal power button can be accessed with the
included hex key (or similar object) through the small round hole on the bottom edge of the tablet.
To Boot:
Press and hold the internal power button for 2-3 seconds until the Intel logo is displayed.
To Wake/Sleep (if the tablet is booted, but the screen has gone to sleep):
Press and release the internal power button. The screen will reactivate.
To Shutdown:
Press and hold the internal power button for 2-3 seconds until the power off options menu is displayed. Tap the
desired option on the screen.
Prevent screen from going to sleep.
Step 1:
Go to SETTINGS DISPLAY. On the right side of the screen, tap “Sleep.”
Choose the desired time out option. (The screen will go blank after the chosen period of time, if the device is not
charging (see step two below).
Step 2:
Go to SETTINGS DEVELOPER OPTIONS. In the upper right corner of the screen, switch the toggle button to the
“On” position. Acknowledge the message by tapping “OK.”
Tap the checkbox for the “Stay awake” option to enable it. The device will not go to sleep while plugged in and
charging.
Connect to your wireless network.
Go to SETTINGS Wi-Fi.
Switch the toggle button to the “On” position.
From the available selections on the right side of the display, choose your local wireless network. If the network is
secured, enter the necessary password.
Connect peripheral devices.
The PROPORT allows you to easily connect peripherals through one of its many available I/O ports. To access the
various ports, you will need to remove one or both of the back panels.
oThe left side provides full-size HDMI, 2 full-size USB, and a GPIO port.
oThe right side provides 2 full-size USB, micro-USB, audio/headphone jack, power connector, and MicroSD card
slot.
Follow the device manufacturer’s recommended setup for your peripheral device.
Get Support.
If you need assistance with the PROPORT tablet, scan the QR code to access our support
website. Or contact AD Technologies at support@applieddevicetechnologies.com. Please
note that we do not provide software support for applications. When you contact us, please
have the Device Serial Number available (support will not be provided without a valid serial
number).
COMPUTER TABLET HARDWARE LIMITED WARRANTY
Product Warranty
Applied Device Technologies (ADT) provides a warranty to the original purchaser of a new Product against defects in materials and
workmanship for a period of one year. If a Product covered by this warranty is determined to be defective within the warranty period, ADT will
either repair or replace the Product at its sole option and discretion.
ADT’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of
God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone
other than by ADT. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year
limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
Type of Service
To obtain warranty service, contact ADT Technical Support at the contact options provided below. PRE-AUTHORIZATION MUST BE
OBTAINED BEFORE SENDING ANY PRODUCT TO ADT. Product serial number is required to determine that a Product is within the warranty period.
Defective Products must be sent to ADT to obtain warranty service. ADT is not responsible for transportation or shipping costs to ADT, but
ADT will cover return shipping to the customer. PREAUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO ADT FOR WARRANTY
SERVICE. Product returns to ADT must utilize either the original box and shipping materials or packaging that affords an equal degree of
protection.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at ADT’s
option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90)
days from warranty service or replacement, whichever is greater.
Disclaimer of Warranties; Limitation of Liability
EXCEPT FOR THE WARRANTIES EXPRESSED IN THIS AGREEMENT, APPLIED DEVICE TECHNOLOGIESK DISCLAIMS ALL OTHER WARRANTIES, EITHER
EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE
WARRANTIES IMPLIED BY AND INCAPABLE OF EXCLUSION, RESTRICTION OR MODIFICATION UNDER APPLICABLE LAW. THE TERM OF ANY IMPLIED
WARRANTIES THAT CANNOT BE DISCLAIMED ARE LIMITED TO THE TERM OF THIS AGREEMENT. APPLIED DEVICE TECHNOLOGIES’ AND YOUR
MAXIMUM LIABILITY TO THE OTHER IS LIMITED TO THE PURCHASE PRICE YOU PAID FOR PRODUCTS PLUS INTEREST AS ALLOWED BY LAW. NEITHER YOU
NOR APPLIED DEVICE TECHNOLOGIES IS LIABLE TO THE OTHER IF YOU OR IT ARE UNABLE TO PERFORM DUE TO EVENTS YOU OR IT ARE NOT ABLE TO
CONTROL, SUCH AS ACTS OF GOD, OR FOR PROPERTY DAMAGE, PERSONAL INJURY, LOSS OF USE, INTERRUPTION OF BUSINESS, LOST PROFITS, LOST
DATA OR OTHER CONSEQUENTIAL, PUNITIVE OR SPECIAL DAMAGES, HOWEVER CAUSED, WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, OTHER THAN THOSE DAMAGES THAT ARE INCAPABLE OF LIMITATION, EXCLUSION OR
RESTRICTION UNDER APPLICABLE LAW. THIS AGREEMENT GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY
FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
ContactUs
TocontactAppliedDeviceTechnologieswithquestions,comments,ortoobtainwarrantyservice,pleaseusethefollowing:
AppliedDeviceTechnologies
Attn:WarrantyServices
3291RacquetClubDrive,SuiteA
TraverseCity,MI49684
Website:www.applieddevicetechnologies.com
Forfulldetailsregardingthewarrantyandotherlegalterms,scantheQRcodetoconnecttoourwebsiteforthelatestinformation.
FCCSTATEMENT
1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing
twoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
2.Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital
device,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable
protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipment
generates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedin
accordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.
Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcan
bedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrect
theinterferencebyoneormoreofthefollowingmeasures:
‐Reorientorrelocatethereceivingantenna.
‐Increasetheseparationbetweentheequipmentandreceiver.
‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCRadiationExposureStatement:
ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecan
beusedinportableexposureconditionwithoutRFstriction.
Intel,theIntellogo,theIntelInsidelogoandIntelAtomaretrademarksofIntelCorporation
intheU.S.and/orothercountries.
Table of contents
