Advantech IDK2121WNK2FHA2EES User manual

User Manual
IDK2121WNK2FHA2E-
ES
TFT-LCD 21.5” FHD (LED
Backlight)

IDK-2121W User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2013
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Core 2 Quad, Pentium Dual Core and Celeron are trademarks of Intel Corpo-
ration.
WinBond is a trademark of Winbond Corporation.
All other product names or trademarks are properties of their respective owners.
Part No. 2006212100 Edition 1
Printed in China Jan 2013

iii IDK-2121W User Manual
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known.
Your satisfaction is our primary concern. Here is a guide to Advantech’s customer
services. To ensure you get the full benefit of our services, please follow the instruc-
tions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

IDK-2121W User Manual iv
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

v IDK-2121W User Manual
Contents
Chapter 1 Overview...............................................1
1.1 General Description .................................................................................. 2
1.2 Display Characteristics.............................................................................. 2
Table 1.1: Display Characteristics ............................................... 2
1.3 Optical Characteristics .............................................................................. 3
Table 1.2: Display Characteristics ............................................... 3
1.4 Functional Block Diagram ......................................................................... 5
Figure 1.1 Function block diagram .............................................. 5
1.5 Absolute Maximum Ratings ...................................................................... 5
1.5.1 Absolute Ratings of TFT LCD Module .......................................... 5
1.5.2 Absolute Ratings of Backlight Unit................................................ 5
1.5.3 Absolute Ratings of Environment.................................................. 5
1.6 Outline Dimension..................................................................................... 6
1.6.1 IDK-2121WR-1KFHA1E................................................................ 6
1.6.2 IDK-2121WN-1KFHA1E................................................................ 8
Chapter 2 Electrical Characteristics.................11
2.1 Power Specification................................................................................. 12
Table 2.1: Power specification................................................... 12
2.1.1 Signal Electrical Characteristics.................................................. 13
Table 2.2: Signal electrical characteristics ................................ 13
2.2 Backlight Driving Conditions ................................................................... 13
Table 2.3: Backlight driving conditions ...................................... 13
Chapter 3 Signal Characteristics.......................15
3.1 Pixel Format Image ................................................................................. 16
3.2 Pin Description ........................................................................................ 16
Table 3.1: Pin Description ......................................................... 16
3.3 The Input Data Format ............................................................................ 18
3.4 Interface Timing ...................................................................................... 19
3.4.1 Timing Characteristics ................................................................ 19
3.4.2 Input Timing Diagram.................................................................. 19
3.5 Power ON/OFF Sequence ...................................................................... 20
Chapter 4 Connector & Pin Assignment...........21
4.1 TFT LCD Module..................................................................................... 22
4.1.1 Connector ................................................................................... 22
Table 4.1: Connector ................................................................. 22
4.1.2 Pin Assignment ........................................................................... 22
Table 4.2: Pin Assignment......................................................... 22
4.2 Backlight Unit .......................................................................................... 22
4.2.1 Signal for LED light bar connector .............................................. 22
4.2.2 LED Driver Board........................................................................ 23
Table 4.3: Specification ............................................................. 23
Figure 4.1 Dimension................................................................. 24
Chapter 5 Touch Screen & Touch Controller ...25

IDK-2121W User Manual vi
5.1 Touch Screen.......................................................................................... 26
5.1.1 Touch Characteristics ................................................................. 26
5.1.2 Optical Characteristics................................................................ 26
5.1.3 Environment Characteristics....................................................... 26
5.1.4 Mechanical Characteristics......................................................... 26
5.1.5 Electronic Characteristics ........................................................... 26
5.1.6 General specification .................................................................. 27
5.2 Touch controller ...................................................................................... 27
5.2.1 Touch Controller Characteristics ................................................ 27
5.2.2 Pin Assignment and Description................................................. 28
Figure 5.1 Board mounted header............................................. 29
5.2.3 Physical dimension ..................................................................... 30
Appendix A Handling Precautions ....................... 31
A.1 Optical Characterisctics .......................................................................... 32

Chapter 1
1Overview

IDK-2121W User Manual 2
1.1 General Description
IDK-2121W series is a Color Active Matrix Liquid Crystal Display composed of a TFT-
LCD panel, a driver circuit, and backlight system. The screen format is intended to
support the FHD (1920(H) x 1080(V)) screen and 16.7M colors (RGB 8-bits data). All
input signals are dual LVDS interface. Driver board for the backlight is included.
1.2 Display Characteristics
The following are characteristics summary under 25°C condition:
Table 1.1: Display Characteristics
Item Unit Description
Screen Diagonal [mm] 546.86(21.53”)
Active Area [mm] 476.64 (H) x 268.11 (V)
Pixels H x V 1920 (x3) x 1080
Pixel Pitch 248.25 (per one triad) × 248.25
Pixel Arrangement [um] R.G.B. Vertical Stripe
Display Mode VA Mode, Normally Black
White Luminance (Center) [cd/m2]1200 (Typ.)
Contrast Ratio 2500 (Typ.)
Optical Response Time [msec] 16 ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V
Backlight Input Voltage [Volt] +12.0 V
Power Consumption
(VDD line + LED line)
[Watt] VDD: 4.4 + PLED: 36.1 = 40.5 (Typ.)
(with LED driver board, all white pattern)
Weight [Grams] R series: 2600 (Typ.)
N series: 1200 (Typ.)
Physical Size [mm] R series: 495.6(W) × 292.2(H) × 19.8(D) Typ.
N series: 495.6(W) × 292.2(H) × 16.9(D) Typ.
Electrical Interface Dual channel LVDS
Support Color 16.7M colors (RGB 8 bits)
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
[°C]
[°C]
N-series/R series
0 to +50-2
0 to +60
RoHS Compliance RoHS Compliance
TCO Compliance TCO 5.1 Compliance

3 IDK-2121W User Manual
Chapter 1 Overview
1.3 Optical Characteristics
Optical Equipment: BM-7, DT-101, or equivalent
Note 1: Definition of viewing angle
Viewing angle is the measurement of contrast ratio at the screen center, over a
180°horizontal and 180°vertical range (off-normal viewing angles). The 180° viewing
angle range is broken down as below: 90° (θ)? horizontal left and right, and 90° (Φ)
vertical high (up) and low (down). The measurement direction is typically perpendicu-
lar to the display surface with the screen rotated to its center to develop the desired
measurement viewing angle.
Table 1.2: Display Characteristics
Item Unit Conditions Min. Typ. Max. Note
Viewing Angle [degree]
Horizontal(Right) CR
= 10 (Left)
150 178 -
1
Vertical (Up) CR = 10
(Down)
150 178 -
Contrast ratio Normal Direction - 3500 - 1
Response Time [msec]
Raising Time (TrR) - 10 12
Falling Time (TrF) - 6 7 5
Raising + Falling - 16 19
Color / Chromaticity
Coordinates (CIE)
Red x 0.589 0.639 0.689
4
Red y 0.283 0.333 0.383
Green x 0.284 0.334 0.384
Green y 0.573 0.623 0.673
Blue x 0.105 0.155 0.205
Blue y 0.000 0.048 0.098
Color Coordinates (CIE)
White
White x 0.263 0.313 0.363
White y 0.279 0.329 0.379
Central Luminance [cd/m2]-1200-
3
Luminance Uniformity [%] - 85 - 3
Crosstalk (in 60Hz) [%] 1.5
Flicker dB -20

IDK-2121W User Manual 4
Note 2: 9 points position
Note 3: The luminance uniformity of 9 points is defined by dividing the maximum
luminance values by the minimum test point luminance
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid
abrupt temperature change during measuring. In order to stabilize the luminance, the
measurement should be executed after the backlight has been on for 30 minutes in a
stable, windless and dark room. Optical Equipment: DT-100, or equivalent
Note 5: Definition of response time:
The output signals of the photo detector are measured when the input signals are
changed from “Full Black” to “Full White” (rising time), and from “Full White” to “Full
Black ”(falling time), respectively. The response time is the interval between the 10%
and 90% of amplitudes. Please refer to the figure as below.
50 %
90 %
90 % 50 %
10 %
10 %
Minimum Bri
g
htness of nine points
W9
=MaximumBri
g
htness of nine points
100
90
10
0
%
Optical
response
White Black White
Tf Tr
90
10
0
Optical
response
White Black White
Tr

5 IDK-2121W User Manual
Chapter 1 Overview
1.4 Functional Block Diagram
The following diagram shows the functional block of the 21.5 inches Color TFT-LCD
Module:
Figure 1.1 Function block diagram
1.5 Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
1.5.1 Absolute Ratings of TFT LCD Module
1.5.2 Absolute Ratings of Backlight Unit
1.5.3 Absolute Ratings of Environment
Note 1: Within Ta (25°C)
Item Symbol Min. Max. Unit Conditions
Logic/LCD Drive Voltage VDD 0 5.5 [Volt] Note 1,2
Item Symbol Min. Max. Unit Conditions
LED light bar Input Voltage VLED - 50 [Volt] Note 1,2
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP 0 +50 [oC]
Note 3
Operation Humidity HOP 5 +90 [%RH]
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST 5 90 [%RH]

IDK-2121W User Manual 6
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality performance, please refer to AUO IIS (Incoming Inspection Stan-
dard).
1. 90% RH Max ( Ta ≤39°C)
2. Max wet-bulb temperature at 39°C or less. ( Ta ≤39°C))
3. No condensation.
Note 4: Function judge only.
1.6 Outline Dimension
1.6.1 IDK-2121WR-1KFHA1E
Front View

7 IDK-2121W User Manual
Chapter 1 Overview
Rear View

IDK-2121W User Manual 8
1.6.2 IDK-2121WN-1KFHA1E
Front View

9 IDK-2121W User Manual
Chapter 1 Overview
Rear View

IDK-2121W User Manual 10

Chapter 2
2Electrical
Characteristics

IDK-2121W User Manual 12
2.1 Power Specification
Input power specifications are as follows:
Note1 Measurement condition:
Table 2.1: Power specification
Symbol Parameter Min. Typ. Max. Unit Condition
VDD Logic/LCD Drive
Voltage
4.5 5.0 5.5 [Volt] ±10%
IDD Input Current
- 0.7 0.8 [A] VDD= 5.0V,All white
pattern, At 60Hz
0.81 0.89 [A] VDD= 5.0V, All white
pattern At 75Hz
PDD VDD Power
- 3.5 4.4 [Watt] VDD= 5.0V,All white
pattern, At 60Hz
4.05 4.9 [Watt] VDD= 5.0V, All white
pattern At 75Hz
IRush Inrush Current - - 3 [A] Note 1
VDDrp Allowable Logic/
LCD Drive Ripple
Voltage
- - 500 [mV] p-p VDD= 5.0V, All white
Pattern At 75Hz

13 IDK-2121W User Manual
Chapter 2 Electrical Characteristics
2.1.1 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Note LVDS Signal Waveform.
2.2 Backlight Driving Conditions
Parameter guideline for LED Light Bar Driver is under stable conditions at 25°C
(Room Temperature):
Note1 The "LED life time" is defined as the module brightness decreased to 50%
original brightness and the ambient temperature is 25°C and typical LED Current at
950 mA.
Note2 The LED driving condition is defined for each LED module.(10 LED Serial).
Note3 The variance of LED Light Bar power consumption is 10%. Calculator value
for reference (IL x VL x 2 = PLED)
Table 2.2: Signal electrical characteristics
Symbol Parameter Min. Typ. Max. Unit Condition
VTH Differential Input High Threshold - - +100 [mV] VCM = 1.2V,
Note 1
VTL Differential Input Low Threshold -100 - - [mV] VCM = 1.2V
Note 1
| VID | Input Differential Voltage 100 - 600 [mV] Note 1
VCM Differential Input Common Mode
Voltage
+1.0 +1.2 +1.5 [V] VTH-VTL =
200MV (max)
Note 1
Table 2.3: Backlight driving conditions
Item Symbol Values Unit Condition
Min. Typ. Max.
LED Voltage VL - - 19 V Note 2
LED Current IL - - 950*2 mA Note 2
LED life time - 50,000 - - Hr Note 1

IDK-2121W User Manual 14