AEI COMMUNICATIONS AGR-8206-SMK User manual

Analog DECT Phone
Manual
V 1.00

1
1 O Ov ve er r v vi ie ew w
This phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to
operate this product and take advantage of its features.
P
Pa ac ck ka ag ge e C Co on nt te en nt ts s
When unpacking the phone, ensure all the following items are present and undamaged. If anything appears to be
missing or broken, contact your dealer for a replacement.
1. Base Unit
2. Cordless Handset
3. Stand
4. Battery
5. AC Adaptor
6. 10-feet, 4 wire Line Cord (with RJ-11 connector)
7. Quick Installation Guide (This document)
2
2 P Pr ro od du uc ct t D De es sc cr ri ip pt ti io on n
The following contains important information to help you familiarize with the functions of the phone.
F
Fr ro on nt t V Vi ie ew w
1. Handset keys
Name
Description
1
Message waiting
indicator
To indicate an incoming call or unread messages.
2
Display screen
To display calls and status information.
3
Speed dial keys
Press to dial the preset number.

Name
Description
4
LINE 1 / LINE 2
To indicate a line been used as the following status:
- Idle: No LED indication.
- In call: Red LED.
- In on-hold call: Blinking red LED.
5
End key
Press to end a phone call
6
Alphanumerical keys
Press these keys to enter phone numbers or texts.
7
Function keys
Hold
Press to put an active call on hold.
Speaker
Press to activate the speakerphone for hands free
conversations.
Volume
Press to increase or decrease the volume of the ringer
tone, handset, or speakerphone.
2Base unit keys
Name
Description
1
Message waiting
indicator
To indicate an incoming call or unread messages.
2
Speed dial keys
Press to dial the preset number.
3
LINE 1 / LINE 2
To indicate a line been used as the following status:
- Idle: No LED indication.
- In call: Red LED.
- In on-hold call: Blinking red LED.
4
End key
Press to end a phone call
5
Alphanumerical keys
Press these keys to enter phone numbers or texts.
6
Function keys
Hold
Press to put an active call on hold.
Speaker
Press to activate the speakerphone for hands free
conversations.
Volume
Press to increase or decrease the volume of the ringer
tone or speakerphone.
B
Ba ac ck k V Vi ie ew w

NO.
Name
Description
1
PSTN line port
Connects to PSTN line.
2
DC 6V Power jack
Connects to AC power adapter.

C
Co on nn ne ec ct ti in ng g t th he e P Ph ho on ne e
The following illustration shows how to connect the power and PSTN ports of DECT phone.
Power outlet

The following illustration shows how to install the phone and stand.
The following illustration shows how to install the handset and battery.

3
3 O Op pe er ra at ti io on ns s
A
An ns sw we er ri in ng g a a C Ca al ll l
An incoming call is indicated by a ringing tone and a flashing indicator at the top of both handset and base units. You
can answer the call by doing one of the followings:
Pick up the handset to answer the call.
Press the Line (Line1/Line2) key on the base or handset to answer the call.
M
Ma ak ki in ng g a a C Ca al ll l
Dialing with the Keypad
Enter the telephone number with the alphanumerical keypad and the call will start automatically.
U
Us si in ng g t th he e S Sp pe ee ed d d di ia al l k ke ey ys s
You can use the 6 pre-assigned speed dial hotkeys, to configure the most commonly dialed numbers. Use the function
to dial a number quickly, instead of keying in a complete number.
To call a number using speed dialing, follow the steps below:
Press the speed dial hotkey that has been pre-assigned to the phone number and the call will start automatically.
C
Ca al ll l O Op pt ti io on ns s
While a call is in progress, a number of additional options are available.
U
Us si in ng g t th he e S Sp pe ea ak ke er r P Ph ho on ne e
For hands free operation, you can use the built‐in speaker to talk on the phone. To use the speakerphone, follow the
steps below:
While talking on the phone, press the Speaker key on the phone to enable the Speakerphone function.
Press Speaker key again to terminate the call.
P
Pu ut tt ti in ng g a a C Ca al ll l o on n H Ho ol ld d
You may want to put a call on hold temporarily while doing some work or attending to a second incoming or outgoing
call. To put a call on hold, do one of the following:
Press the Hold key on the phone to put the call on hold.
When you receive a second call, press the next available LINE key to attend to the new call, and the first call will be
put on hold automatically.
C
Ch ha ar rg gi in ng g t th he e H Ha an nd ds se et t B Ba at tt te er ry y
You would need to charge the handset battery before using the handset.
Install the battery into the handset.
Place the handset onto the base unit and base unit will start to charge the handset automatically.
The charging indicator lights up in red during charging progress. The LED goes off after the handset battery is
fully charged.
C
Ch he ec ck ki in ng g V Vo oi ic ce e M Me es ss sa ag ge es s
If the message waiting indicator at top of handset or base unit lights up in red, it indicates that there are one or more
new messages in voicemail box.
Press the VOICE MAIL key on the phone to retrieve voice messages.
(An external ITSP or PBX must support voice message feature. And you need to set a voice message code before using
the voice mail feature.)

F
FC CC C I In nt te er rf fe er re en nc ce e I In nf fo or rm ma at ti io on n
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference; and (2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving”the
interference).
•Reorient or relocate and increase the separation between the telecommunications equipment and receiving
antenna.
•Connect the telecommunications equipment into an outlet on a circuit different from that to which the
receiving antenna is connected
F
FC CC C R RF F R Ra ad di ia at ti io on n E Ex xp po os su ur re e S St ta at te em me en nt t
The installation of the base unit should allow at least 20 centimeter between the base and persons to be in
compliance with FCC RF exposure guidelines. For body worn operation, the portable part (handset) has been
tested and meets FCC RF exposure guidelines.
This device must not be co-located or operating in conjunction with any other antenna or transmitter. The changes or
modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

AEI COMMUNICATIONS CORP.
1001 Broadway, Millbrae, California 94030
Direct: [phone] ,Tel: [phone]
Analog DECT Phone for Desktop/Bedside
Model: AGR-8206-SMK/AGR-8106-SMK
1. Esthetic Design 2012/03 v0.1

AEI COMMUNICATIONS CORP.
1001 Broadway, Millbrae, California 94030
Direct: [phone] ,Tel: [phone]
Analog DECT Phone for Desktop/Bedside
Model: AGR-8206-SMK/AGR-8106-SMK
2. Features / Software Specifications
Handset
Keys

 Dial keys

 Line keys

 Function keys
AGR-8206-SMK
(0~9, *, #)
Line1, Line2, END
Hold, Speaker, Volume, 6 speed dial
keys
AGR-8106-SMK
(0~9, *, #)
Line, END
Mute, Speaker, Volume, 6 speed dial
keys
Phone Features

 One or Two Lines

 Call Hold and resume(AGR-8206-SMK only)

 Handset, Speaker, and Ringer volume control

 Full duplex speaker phone

 6 programmable speed dials

 Mute and resume(AGR-8106-SMK only)

 Red color message waiting indicator for
ringing, charging, and message waiting
Display Contents

 Main logo

 Speed dial icon

 Battery status: power level, charging status

 DECT signal status

 Line status

 Firmware Version
DECT Standard

 DECT / CAT iq1.0 compatible

 Radio Frequency Range：1880~1930 MHz

 EU：1881.792(ch0)~1897.344(ch9) 10 Channels

 US：1921.536(ch0)~1928.448(ch4) 5 Channels

 Channel Space：1728 KHz

 Bit rate：1150 Kbit/s

 Modulation：GFSK

 Voice coding：16 Kbit/s
Base
Keys

 Dial keys

 Line keys

 Function keys
AGR-8206-SMK
(0~9, *, #)
Line1, Line2 with LED, END
Hold, Speaker, Volume, 6 speed dial
keys
AGR-8106-SMK
(0~9, *, #)
Line with LED, END
Mute, Speaker, Volume, 6 speed dial
keys
Phone Features

 One or Two Lines

 Call Hold and resume(AGR-8206-SMK only)

 Speaker, and Ringer volume control

 Full duplex speaker phone

 6 programmable speed dials

 Mute and resume(AGR-8106-SMK only)

 Red color message waiting indicator for
ringing and message waiting
DECT Standard

 DECT / CAT iq1.0 compatible

 Radio Frequency Range：1880~1930 MHz

 EU：1881.792(ch0)~1897.344(ch9) 10 Channels

 US：1921.536(ch0)~1928.448(ch4) 5 Channels

 Channel Space：1728 KHz

 Bit rate：1150 Kbit/s

 Modulation：GFSK

 Voice coding：16 Kbit/s
3. Hardware Specifications
Handset
Display

 1.8“ TFT color display
LED Indications

 Message waiting indicator and keypad backlight
Power

 3.7v / 900 mAh Li-ion battery

 Charging Time : 5 hrs

 Standby Time : 240 hrs

 Talking Time: 9 hrs
Contact pins

 3 contact pins for charging, hook detect and auto-pairing
Size and Weight

 Dimensions: 175mm(L) x 49mm(W) x 24mm(H), Weight: 180g(battery included)
Base
LED Indications

 Line keys, Hold/Mute, Speaker keys, Message waiting, Handset charging indicators, and keypad
backlight
Power

 AC adaptor: Input: 100 ~ 240 VAC, Output: 6V / 1A

AEI COMMUNICATIONS CORP.
1001 Broadway, Millbrae, California 94030
Direct: [phone] ,Tel: [phone]
Analog DECT Phone for Desktop/Bedside
Model: AGR-8206-SMK/AGR-8106-SMK
Jacks

 RJ14 x 1, DC jack x1
Contact pins

 3 contact pins for charging, hook detect and auto-pairing
Line cord

 10 feet x 1
Size and Weight

 Dimensions:193mm(L) x109mm(W) x 98mm(H), Weight: 450g
3. Regulatory
USA
EU
EMI
FCC Part 15B, 15D
EN301489-11-6
Safety
EN 60950-1
EMC
EN 301406
PSTN
Part68
TBR21
RoHS

 Comply with Directive 2002/95/EC RoHS (as amended by Commission Decision 2005/613/EC)
Temperature

 Storage:
Low Temperature at -10°C.
High Temperature at +60°C

 Operating:
Low Temperature at 0°C.
High Temperature at +40°C.