Aerovex Systems Sunflower II LED User manual

The Sunflower II LED
Dust Collector
608-222-2022
www.aerovexsystems.com
What Comes in the box?
How to assemble the Sunflower II LED
[email protected]
2 Filters
Step 1:
Open your box and make sure you
have all the parts in the section
above. Remove bubble protection on
the Sunflower Head part and Flexible
stand.

Step 2:
Attach head assembly into flexible metal
stand. Connector looks it lacks a hook,
but please note that it is intentionally
removed and normal.
Step 3:
Install the standard clamp mount (Also
other optional mounts are available). And
fasten knob screw. Do not tight too hard.
It is a good idea to leave a room for easy
rotation. Connect the AC-DC adapter into
female connector at the bottom.
Step 4:
Your Sunflower is ready for use! Make
sure your Sunflower is connected directly
to a power outlet, and not an extension
cord or power strip. The Sunflower needs
the voltage.
How to operate: Turn switch downward to run motor and lamp, upward to turn on
lamp only (or vice versa). To turn off place switch in the middle. Please review care
and maintenance guide on page 5 prior to use.

Part Description and Specs

Optional Mounting Devices
Screw on Mount Suction Mount Clamp Mount
(Included)
Hole Mount (through
table)
Wheeled Stand
You can order these optional mounting
devices on our website:
www.aerovexsystems.com or call
608-222-2022

Warranty/ Maintenance
You can order replacement filters on our
website: www.aerovexsystems.com or call
608-222-2022
Warranty: There is a 1 year parts factory warranty. View our
website for more information
Return Policy: Contact us for a return authorization within 30
days of receiving date. Shipping is non refundable and a 20%
restocking fee will be deducted. See our return policy on our
website for more information.
Care of Sunflower II LED: Please clean filter regularly (daily
recommended) and change it regularly (biweekly or monthly
depends on your usage). Clean/empty filter works the best.
Please do not overburdened motor with full filter. Motor
damage due to filter neglect may not be covered by the
warranty.
How to change filters: Bend backward the flexible metal stand
so that lamp sees the ceiling. Open the filter housing by
turning it counterclockwise. Take out the filters and clean with
regular vacuum or tapped it outside.