Agilion WIRELESS TAG ASSET PULSE PHASE User manual

WIRELESS TAG ASSET PULSE | PHASE
User Manual

20190213-6032701-UM 3EN
Table of contents
English
1. Overview ..............................................................................................................4
1.1 General.............................................................................................................4
1.2 Delivery contents WIRELESS TAG ASSET PULSE I PHASE...........................4
1.3 Power supply....................................................................................................4
1.4 Areas of application ..........................................................................................4
2 Mechanics, technical data ....................................................................................6
2.1 WIRELESS TAG ASSET PULSE I PHASE.......................................................6
2.1.1 LED..........................................................................................................6
2.1.2 Technical data..........................................................................................7
2.1.2.1 Radio .......................................................................................................7
2.1.2.2 Power supply............................................................................................7
2.1.2.3 Environment and dimensions ...................................................................7
3 Installation, initial start-up, safety..........................................................................8
3.1 General information ..........................................................................................8
3.2 Installation of WIRELESS TAG ASSET PULSE I PHASE .................................8
3.3 Cleaning and maintenance ...............................................................................8

420190213-6032701-UM
EN
1. Overview
1.1 General
The WIRELESS TAG ASSET PULSE I PHASE represents the movable device considered
for localization within the Agilion WIRELESS LOCATION SYSTEM localization network. It
sends its positional information to the localization network’s nodes (anchors and gateways)
which transmit the data to the localization server for computation and visualization.
1.2 Delivery contents WIRELESS TAG ASSET PULSE I PHASE
·1 WIRELESS TAG ASSET PULSE I PHASE, order number 6032701
·1 User’s manual (this document)
·CR123A battery
1.3 Power supply
The power supply of the WIRELESS TAG ASSET PULSE I PHASE is realized via CR123A
battery.
1.4 Areas of application
The WIRELESS TAG ASSET PULSE I PHASE is designed for an operation temperature
range from -10 °C to +50 °C. The battery of WIRELESS TAG ASSET PULSE I PHASE need
to be exchanged in dry environments. The device is protected against water splashing on all
sides (IP54).

20190213-6032701-UM 5EN
Important information for use in the USA:
·This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
·This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
·Changes modifications or made to this equipment not expressly approved by Agilion
GmbH may void the FCC authorization to operate this equipment.
·This equipment complies with FCC radiation exposure limits set forth for an uncon-
trolled environment. This equipment should be installed and operated with minimum dis-
tance of 20 cm between the radiator and your body.

620190213-6032701-UM
EN
2Mechanics, technical data
2.1 WIRELESS TAG ASSET PULSE I PHASE
2.1.1 LED
Status LED display (red) Description
Blinking Power-on
Flashing Movement starts

20190213-6032701-UM 7EN
2.1.2 Technical data
2.1.2.1 Radio
Radio PULSE (Location)
Wireless technology IEEE 802.15.4-2011 UWB
Frequency range 3100 MHz – 4800 MHz
Output power 0.023 mW (-16.31 dBm)
Antenna UWB antenna (built-in)
Radio PHASE (Communication and optional location)
Wireless technology IEEE 802.15.4
Frequency range 2.40 to 2.48 GHz ISM-Band
Output power Max. 4 dBm (adjustable)
Band width 2 MHz; Data transmission via 802.15.4 channels (adjustable)
Antenna 2.4 GHz antenna (built-in)
2.1.2.2 Power supply
Power supply
Energy supply CR123A battery
Service life (@20°C)
(similar to cell phone)
Standby: 1 year
Active time: 100% UWB-location @ 1 sec: 6 months
2.1.2.3 Environment and dimensions
Environment and dimensions
Case Plastic housing
IP-Protection IP 54
Dimensions approx. 89 x 29 x 30 mm
Weight approx. 90 g (incl. battery)
Operation temperature range -10 °C to +50 °C

820190213-6032701-UM
EN
3 Installation, initial start-up, safety
3.1 General information
·Carefully read ALL items listed in section 3. Installation, initial start-up, safety before
installing the devices in order to safeguard correct installation and operation.
·The devices can only be used in combination with the WIRELESS LOCATION
SYSTEM.
·Buildup, installation as well as the use of the tools and clients of the localization sys-
tem are described in the corresponding guides and manuals.
3.2 Installation of WIRELESS TAG ASSET PULSE I PHASE
·The WIRELESS TAG ASSET PULSE I PHASE is intended for installation on vehi-
cles, tools and containers for storage and transport.
·For an optimal location, the WIRELESS TAG ASSET PULSE I PHASE has to be
mounted such that it has a direct line of sight to the infrastructure devices.
·Before usage of WIRELESS TAG ASSET PULSE I PHASE, check the device for
damages such that it will not be damaged during operation.
·The indicated operation temperature ranges must be satisfied.
·The WIRELESS TAG ASSET PULSE I PHASE contains a Lithium battery. The im-
proper use of batteries can cause fire and skin burns.
·The case of WIRELESS TAG ASSET PULSE I PHASE must never be crushed, punc-
tured or exposed to other mechanical violence. Only for battery exchange it is allowed
to open the case. Please pay attention to the correct polarity of the batteries (labeling
on the battery holder).
·Never expose the WIRELESS ASSET TAG PULSE I PHASE to fire or temperatures
above 50 °C.
Do not expose the WIRELESS TAG ASSET PULSE I PHASE over a longer time to
direct solar radiation.
3.3 Cleaning and maintenance
·It is forbidden to open the case for actions other than the battery exchange.
·The device should only be repaired or accessed for other work by an authorized tech-
nical service company.
·Improperly opening or repairing the device can seriously endanger the user.
·Unauthorized opening of the device will annul the warranty claim of Agilion GmbH.
·Do not use any liquids as well as abrasive, caustic or flammable cleaning aids for
cleaning the housing. Germany

Notes:

Agilion GmbH
Blankenauer Straße 74
09113 Chemnitz
Germany
Tel.: +49 - (0)371 - 45 00 48-0
Fax.: +49 - (0)371 - 45 00 48-11
www.agilion.de
[email protected]
Managing board:
Sven Sieber
Andreas Werner
Johannes Waldhör
HR B 21249 Chemnitz
USt.-IdNr.: DE236591552