Agora SA-G82438S User manual

agora Goals are 100% aerospace-grade aluminum
for all-weather, heavy-duty performance and lightweight
convenience and safety. Push-button connections.
Two person assembly required.
Rev_2019-02-18
86” 86”
ASSEMBLY:
1. Lay the pieces on the field and assemble
Crossbar in the following order:
A - AA - A - AA - A
2. Connect Top Corner Pieces (A1 and A2)
to left and right side of Crossbar, respectively.
3. Connect Side Post (B) to Crossbar.
Note: Side Posts are shorter pieces with warning stickers.
4. Connect Bottom Corner pieces (D1) to
Side Posts.
5. Assemble Backdrop in the following order:
C1 -C2 - C3 -D
6. Connect Backdrop to Goal Frame.
Note: Must be inserted by two people
simultaneously for proper connection.
7. Between two adults, carefully raise and rotate
the goal onto its base.
8. Anchor down goal.
A1 A2A
B B
D1
C1
C2
C3
D
C1
C2
C3
D
D1
AA A AAA

agora
Back-bottom Bars are 100% rust-proof
aerospace-grade aluminum. White powder-coated.
ASSEMBLY:
1. Attach pieces together as shown in illustration above.
2. Insert bolts through the holes located at the base of the goal.
Connect Back-bottom bar to the bolts (Figure A).
3. Fasten nut by using wrench and allen wrench included (Figure B).
4. Attach other side of the bar by repeating step 2-3.
GENERAL WARNING - CAUTION
WARNING This equipment must be anchored at
all times. Moveable goals and equipment can tip
over causing severe injury or death. Never climb
on the cross bar or netting. This equipment sho-
uld not be set up, installed or used by participants
without proper training or supervision. This pro-
duct has been manufactured in comformity with
all applicable safety standards. The user is res-
ponsible for the use of this product and assumes
all risk of injury.
Never climb on goals.
Goal can fall over causing
serious injury or death.
!WARNING
Figure A
Figure B
Rev_2019-02-18
(SA-G824B)
Fits Semi-Pro & Premier 8’x24’ Goals
88” 88” 88”