aidapt VM844 Manual


Fitting and Maintenance Instructions Ver. 2 08/2012 (2270)
2
INTRODUCTION
Thank you for deciding to purchase the Wall Mounted Key Safe from Aidapt. When used
correctly it is designed to give many years of reliable trouble-free service.
NB. This product must be installed by a competent adult.
PART # D SCRIPTION QTY
1 atch 1
2 Safe Cover 1
3 Reset Mechanism 1
4 Spring 1
5 Set Button 10
6 Spring 10
7 Set Spindle 10
8 Spring 10
9 Engage Plate 1
10 Screw 1
11 Trifle 1
12 Base Plate 1
13 Screw 4
14 Back Plate 1
15 Screw 1
16 Key Ring 1
17 Housing 1
18 Outerware 1

Fitting and Maintenance Instructions Ver. 2 08/2012 (2270)
3
B FOR US
•Carefully remove all packaging. Avoid using any knives or other sharp instruments
as this may damage the product.
•Check the product for any visible damage. If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
•Please read these operating instructions carefully before you operate the lock or try
to change the combination of numbers.
NB. The Key Safe is delivered without a code – you need to save your chosen code the
first time you use it.
HOW TO OP N TH K Y SAF FOR TH FIRST TIM
•Push the C EAR button down
•Push the OPEN button down
•You can now open the cover
HOW TO SAV A N W COD
•Choose your code (minimum 3 digits). We recommend using a 4 digit, non-
concurrent code with no repeated numbers, e.g. 4827 rather than 4485 or 8787.
•Remove the back panel (#14) of the cover by removing the screw (#15) with a
screwdriver.
•Set your chosen code by turning the corresponding plastic screw (#7) behind the
number by 180o so that the arrow on the screw (#7) points down. Repeat for each
digit in your chosen code.
•You have now saved the code and the back panel can be replaced onto the cover.
HOW TO OP N OR CLOS TH SAF
•Push the C EAR button down
•Type the code in
•Push the OPEN button down
•You can now open/remove the cover or replace it to close the Safe
CAR & MAINT NANC
Please make a check of the product at regular intervals or if you have any concerns.

Fitting and Maintenance Instructions Ver. 2 08/2012 (2270)
4
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or
establishing any contractual or other commitment by Aidapt Bathrooms imited, Aidapt
(Wales) td or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3 X
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk

Coffre fort pour Clés
VM844
Notice de montage et d’entretien

Notice de montage et d'entretien Ver. 2 08/2012 (2270)
6
INTRODUCTION
Nous vous remercions d’avoir acheté chez Aidapt le coffre à clé mural. Avec une
utilisation et un entretien adaptés, il est conçu pour vous servir et vous satisfaire
pendant de nombreuses années.
NB. Cet équipement doit être installé par un adulte compétent.
PIÈCE DESCRIPTION QTÉ
1 Loquet 1
Couvercle du coffre 1
3 Mécanisme de réinitialisation 1
4 Ressort 1
5 Bouton de réglage 10
6 Ressort 10
7 Axe de réglage 10
8 Ressort 10
9 Plaque de maintien 1
10 Vis 1
11 Bagatelle 1
1 Plaque de base 1
13 Vis 4
14 Plaque de derrière 1
15 Vis 1
16 Porte-clé 1
17 Boîtier 1
18 Cache extérieur 1

Notice de montage et d'entretien Ver. 2 08/2012 (2270)
7
AVANT UTILISATION
•Retirez parfaitement l'emballage. Évitez d'utiliser un couteau ou tout
instrument coupant qui pourrait endommager le produit.
•Vérifiez tout dégât visible sur votre produit. En cas de dommage ou de
défaut suspect, veuillez ne pas utiliser votre produit et contactez votre
fournisseur.
•Veuillez lire attentivement cette notice de fonctionnement avant d'utiliser
le verrou ou d'essayer de changer la combinaison de chiffres.
NB. Le coffre à clé est fourni sans code, vous devez enregistrer le code que
vous avez choisi lors de la première utilisation.
COMMENT OUVRIR LE COFFRE À CLÉ POUR LA PREMIÈRE FOIS
•Appuyez sur le bouton CLEAR
•Appuyez sur le bouton OPEN
•Vous pouvez maintenant ouvrir le couvercle
COMMENT ENREGISTRER UN NOUVEAU CODE
•Choisissez votre code (3 chiffres minimum). Nous vous recommandons
d'utiliser 4 chiffres sans répétition, par exemple 48 7 et non 4485 ou 8787.
•Enlevez le panneau arrière (14) du couvercle en retirant la vis (15) avec un
tournevis.
•Entrez le code choisi en tournant la vis en plastique correspondant (7)
derrière le nombre à 180° pour que la flèche sur la vis (7) pointe vers le bas.
Répétez l'opération pour chaque chiffre du code choisi.
•Vous avez maintenant enregistré le code et le panneau arrière peut être
replacé dans le couvercle.
COMMENT OUVRIR OU FERMER LE COFFRE
•Appuyez sur le bouton CLEAR
•Tapez le code
•Appuyez sur le bouton OPEN
•Vous pouvez maintenant ouvrir/retirer le couvercle ou le replacer pour
fermer le coffre
SOIN ET ENTRETIEN
Effectuez un contrôle régulier de votre produit ou dans le cas où vous auriez un
doute.

Notice de montage et d'entretien Ver. 2 08/2012 (2270)
8
INFORMATIONS IMPORTANTES
Les informations contenues dans ce livret d’instructions ne doivent pas être
considérées comme faisant partie de ou établissant un contrat ou un engagement
quelconque par la société Aidapt Bathrooms Limited, Aidapt (Wales) Ltd ni par ses
représentants ou ses filiales et aucune garantie concernant les informations n'est
donnée.
Nous vous remercions de bien vouloir faire preuve de bon sens et de ne pas
prendre de risques inutiles lorsque vous utilisez ce produit; en tant qu'utilisateur,
vous devez accepter et être conscient de votre responsabilité quant à votre sécurité
lorsque vous utilisez ce produit.
Veuillez ne pas hésiter à contacter la personne qui vous a fourni ce produit ou le
fabricant (coordonnées ci-dessous) pour davantage de renseignements concernant
l’installation/utilisation de votre produit.
Altai France (Altai Europe Ltd)
Z.A. du Bel Air, 17D rue de Creil, 95340 BERNES-SUR-OISE, France
Tél: 01.30.34.90.84 | Fax: 01.30.34.00.68 | E-mail: altaieurope@orange.fr
Table of contents
Languages:
Other aidapt Rack & Stand manuals
Popular Rack & Stand manuals by other brands

Kargo Master
Kargo Master 42000 Instruction guide

Panasonic
Panasonic TY-WK85PV12 installation instructions

Lucasey
Lucasey THFSUL2014 installation instructions

HAGOR
HAGOR WH Turn L installation manual

Elenco Electronics
Elenco Electronics SM-200K Assembly and instruction manual

Aruba Networks
Aruba Networks AP-270-MNT-H1 installation guide