AirTies Air 4410 User manual

www.airties.com
Visit www.airties.com for full list of technical support telephone numbers.
Three years warranty
AirTouch
24/7 people support
0845 557 5782 (from United Kingdom)
[phone] (International)
YM.AP.4410.UM.EN.D00REV13102011

Wireless life
Wireless Access Point
Air 4410
Quick Installation
Guide

Cabling
First complete the cabling process as shown in the diagram.
1. Connect the power adapter inside your box to the power inlet
socket of your device and plug into the electric socket
2.TurnontheAir4410byswitchingtheOn/Obuttonto
position “1”.
3. Connect the Ethernet cable inside the box to the Air 4410’s
Ethernet port and connect the other end to an ADSL modem or
switch’s Ethernet port.
After completing the cabling process, insert the Easy
Installation CD to your computer (Windows XP, Vista or 7).
The Easy installation Program will start automatically. Non
Apple users please see section Installation for Apple
Users (page 1) on the full user manual contained within
the accompanying CD.
Step 1

3
1
2
Cabling

Step 2
Setup
AirTies Network Assistant will run automatically.
Click the Next button to setup your device.
Step 3
a) XP and Vista users: In the wireless settings menu, you can
congureyourdevice’ssecuritylevel,passwordandWireless
Network Name (SSID). If you do not change anything in these
setings,theAirTiesservicesoftwareautomaticallyconguresyour
wireless security settings and creates a password at the highest
security level. After clicking the Next button, the program will
automatically save these settings to the Air 4410 and create a
wirelessproletoallowyoutowirelesslyconnectyourcomputerto
it.

b) Windows 7 users: If your operating system is Windows 7, you can
congureyourwirelesssettingsautomaticallybyusingtheAirTouch
features. After pressing the “AirTouch” button on your device for two
seconds, click on “AirTouch” as shown on the following screen.

With AirTouch, your wireless network will be automatically secured.
Click the Next button.
Step 4
You have the option to register your product with AirTies. To register
with AirTies, enter your name, e-mail address and phone number.
Click the “Finish” button.

Congratulations!Yousuccessfullyconguredyourdeviceas
a wireless Access Point.

Configuring AirTies Mesh
If you have more than one AirTies wireless product then you can
extend the coverage of your wireless network by repeating the
wireless signal and creating a Mesh.
Below is an explanation of how to increase the range of a wireless
network using an Air 4410 and an Air 5452 AirTies wireless ADSL
gateway.
•AirTies Air 5452 The device provides access to the Internet using
ADSL2+ and has a Wi-Fi Access Point onboard.
•AirTies Air 4410 is used as a repeater for the Air 5452 to increase
the range of the wireless signal.
Configuring Universal Bridge
The Universal Bridge feature allows for any device with an Ethernet
port to be wirelessly connected to an existing wireless Access Point.
This allows for devices such as Set Top Boxes, Connected TVs and
printers to be connected to an existing Wi-Fi wireless network.
FordetailsofhowtocongurethispleaseseetheAdvanced
Settings (Page 12) and Universal Bridge (Page 21) on the full
user manual contained within the accompanying CD.
OncetheUniversalBridgehasbeencongured,anydevicethatis
attached to the Air 4410 will be wirelessly connected to the home
network.

1. AirTies Air 5452 Settings
The Air 5452 is configured using the Easy Installation process
and should be powered on, connected to the Internet and have
wireless security configured.
2. AirTies Air 4410 Settings
The Air 4410 is placed at a location between the Access Point
andanareathatmaybesueringfromweakwirelesscoverage.
Power on the device.
3. AirTouch Settings
Once both devices are powered on it is easy to configure
AirTouch
A. On the Air 5452 press and hold the AirTouch button for 3
seconds. It should start blinking.
Air 5452

Air 4410
B.Immediately after pressing AirTouch on the Air 5452 (maximum
two minutes) on the Air 4410 press and hold the AirTouch button
for 3 seconds. It should start blinking.
After approximately 30 seconds the lights should stop blinking,
turnoforafewsecondsandthenturnontobesolid.TheMesh
is now created and the Air 4410 is repeating your wireless signal.
AirTouch with Mesh can extend your wireless network that
easily!

Phone line
Air 4410
Air 4410
Air 5440
Internet
Air 7124
Air 2410
Network name: AirTies
Password:Wirelesslife
Network name: AirTies
Password:Wirelesslife
Network name: AirTies
Password:Wirelesslife
4. Network management with Simplified with AirTouch
For a network that has Mesh configured using AirTouch, any
changes that are made to the wireless settings are automatically
copied and applied to every other AirTies device in the network.
For example, if a network contains three AirTies repeaters then
changing the wireless password on one of the devices will update
the wireless password for all devices. This simplifies managing
the network and saves the end user time.
AirTouch removes the complications and time required to
configure the wireless network settings. The AirTouch one touch
setup is easy, secure and automatic. With AirTouch it is also
very easy and secure to extend the coverage of the wireless
network by adding other AirTies devices and creating a MESH
wireless network.