Alpha Communications PENTHA GB2 User manual

AWD255 REV. 11/2017
PENTHA GB2 MONITOR
USER MANUAL
C m raa e
Door
Me sa ess g Media Call Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
TECHNOLOGY

INTRODUCTION
First of all, we thank and congratulate you for purchasing this product.
Our commitment to achieving the satisfaction of customers like you is manifested through our ISO-9001 certification
and the manufacture of products like the one you have just purchased.
Its advanced technology and strict quality control will ensure that customers and users enjoy the numerous features
that this device offers. To get the most out of them and ensure proper operation from day one, we recommend that you
read this instruction manual.
CONTENTS
2
SAFETY PRECAUTIONS
-Avoid overtightening the screws of the monitor's wall mounting connector.
-Always disconnect the power supply before making modifications to the device.
-The fitting and handling of these devices must be carried out by .authorised personnel
-.All of the wiring must run at least 40cm away from any other wiring.
-Install the monitor in a dry protected location free from the risk of dripping or splashing water.
-Do not place in humid, dusty or smoky locations, or near sources of heat.
-Before connecting the device to the mains, check the connections between the door panel, power supply, distributors
and monitors.
-Always follow the instructions contained in this manual.
Introduction.................................................................................................................................................................. ..2.
Contents....................................................................................................................................................................... .2. .
Safety precautions........................................................................................................................................... .2.............. .
Characteristics ............................................................................................................................................................... .3
System operation.......................................................................................................................................... .3................. .
Description of the monitor................................................................................................................................................
................................................................................................................................................................. .4. .
Description
...................................................................................................................... .4............. .Function push button and LEDs
.............................................................................................................................................. . 4.... .Connection terminals
............................................................................................................................. .... 4................................... .DIP switch
................................................................................................. ........... 5................. .Setting the monitor's address codes
Installing the monitor in a wall mounting connector .... ................................................................................................ ..... . 6.
Installing the monitor in an embedding box.................................................................................................................... . 7. .
Operation............................................................................................................................................................... ..........
...................................................... .8. .
Description and communication with hearing aids (PENTHAGB2/H monitor only)
1.1 ........................................................................................................................ 8.Receiving a call from the door panel
1.2 ......................................................................................................... .9..................... .Call not answered (missed call)
1.3 .................................................................................................................... .9........ .Ending a call from the door panel
1.4 ....................................................................................................................... 9.Answering a call from the door panel
1.5 Answering a call from the door panel, activating the light (SAR-GB2 required) and displaying cameras
(DQ-CAM-GB2 required). 10-11..........................................................................................................
Monitor screen and volume settings menu (brightness, colour, contrast, communication volume and screen format)..12-13
User menu......................................................................................................................................................... .. .......... ..
.................................................................................................................................................. 14..
Accessing the menu
.................................................................................................................... .14-15.... .Displaying main door panel image
.............................................................................................................................. .15-16.Displaying door panel images
.................................................................... .16-17.......... .Displaying camera pictures (DQ-CAM-GB2 module required)
.............................................................................................................................................. .17-21....... .Text messages
.............................................22.Viewing photos and videos of door panel calls/cameras and deleting photos and videos
......................................................................................... . 23-24.... .MicroSD card (information, copying and formatting)
...................................................................................................................................... .. 25............. .Viewing the call log
.............. .26-30.. .Intercom (transmission within the same apartment and between apartments) and call to guard monitor
............ . 31-32................................................ .Configuring divert call phone numbers and GSM-GB2 device information
................................................................................................ .32.Activating external light (SAR-GB2 module required)
..................................................................... .33-34..................... .Enabling / disabling do not disturb or divert call modes
................. .35-41....................... .Settings (volume/ringtones, date/time, language, default settings, installer menu, etc.)
.. . 41-43.............. .Configuring from the monitor menu (address, master/slave and displaying slave monitor image in call)
Cleaning the monitor............................................................................................................................................... .....43.
Annex: Changing the time range of the monitor's day mode................................................................................... .45-46. .
PENTHA MONITORG 2B

CHARACTERISTICS
-Hands-free monitor.
-7” TFT colour screen.
-Monitor with simple installation (non-polarised 2 wire BUS).
-The PENTHA GB2/H monitor interacts with hearing aids equipped with T-mode, making conversation between the
door panel and apartment easier.
-Capacitive menu access and (slave monitor only) start/stop communication button.
-Touch screen for access and selection of menu functions:
User menu:
-Displaying door panel images.
-Displaying camera pictures (DQ-CAM-GB2 module required).
-Sending and receiving text messages from the same apartment and other apartments in the building.
-Viewing photos or videos of missed calls (microSD card up to 16 GB and Class 10 required).
-Door panel or intercom call log (received and made).
-Intercom calls within the same apartment.
-Intercom calls between apartments.
-Call to guard.
-Activating external light (SAR-GB2 module required).
-About: Information, access to the installer menu and default settings (restore).
-Settings: Ringtone, ringtone volume, date / time, language and enabling intercom between apartments.
Installer menu:
-Monitor as master or slave 1, slave 2 or slave 3. Up to 4 monitors per apartment.
-Enabling the menu to be viewed when the Bus is busy.
-Enables the monitor address to be programmed from the installer menu.
Screen, volume and control settings menu: (during auto switch-on or communication).
-Manual photo or video recording (microSD card up to 16GB and Class 10 required).
-Door 1 opening control / door 2 opening control.
-Start/stop communication control.
-External light control (SAR-GB2 module required).
-Scene: Normal, bright, soft or user picture.
-Brightness, contrast and colour.
-Screen format (4:3, 16:9 wide and 16:9 high).
-Displaying camera pictures (DQ-CAM-GB2 module required).
-Different ringtones to identify the origin of the call (door panel, intercom or apartment door).
-DIP switches for setting the monitor address (call code) and end of line.
-Input for call from the apartment door.
-SAR-12/24 call repeater output (12Vdc/50mAmaximum).
SYSTEM OPERATION
-To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being
made and LED will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that a
call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by
mistake, press the button for the correct apartment and the first call will be cancelled.
-The call lasts for 40 seconds and, when received, the image appears on the master monitor without the visitor
knowing. To view the image on a slave monitor, this function needs to have been enabled on the monitor. House kit
application: the image appears on the monitor (with code 0 'apartment 1' or monitor with code 16 if the call is in
'apartment 2') when receiving the call without the visitor being alerted.
If the call is not answered within 40 seconds, LED will turn off and the channel will be freed.
-To establish communication, press option on the screen of the master monitor or the logo on the front of
any slave monitor in the apartment (unless the 'display image in call' function is enabled on the slave monitor, in which
case, option must be pressed), and LED on the door panel will illuminate. If the monitor is a PENTHA GB2/H
with icon on the front, make sure that the hearing aid is between 15 and 25 cm away from the monitor to ensure
maximum audio quality during communication with the door panel.
-Communication will last for one and a half minutes or until option on the monitor screen is pressed. When
communication has finished, LEDs and will turn off and the channel will be freed. If vocal synthesis is enabled, a
'Communication is finished' message will indicate that the call is over.
-To open door 1 or 2, press option / on the monitor screen during the call or communication processes: one
press will activate the lock release for 5 seconds and LED will also illuminate for 5 seconds. If vocal synthesis is
enabled, a 'Door Opened!' message will be indicated on the door panel.
-The description of the function push button and LEDs can be found on p. 4.
3
1 2
PENTHA MONITORG 2B

DESCRIPTION OF THE MONITOR
Connection terminals and DIP switch:
Connection terminals:
L1, L2:Bus connection (non-polarised).
HZ+, HZ-: Door bell connection.
CALL REPEATER, GND: Call repeater connection (SAR-12/24).
(12Vdc/50mAmaximum).
Configuration DIP switch:
DIP 6: Configures the end of line. Leave in the ON position in
monitors where the bus cable terminates. Set to OFF in
intermediate monitors only.
DIP 1 to DIP 5: To set the monitor address (addresses 0 to 31).
The switches set to OFF have a zero value.
The values of the switches set to ON are shown in the table
below.
The monitor code is the sum of the values of the switches set to
ON.
123
ON DIP
456
L1
L2
(R ):ED CALL REPEATER
( ):BLACK GND
( ):YELLOW DO NOT USE
4
123
ON DIP
4 5 6
E mpl : 0 + 0+4 + 0 +16 = 20xa e
Switch nº: 1 2 3 4 5
: 1 2 4 8 16
Value when ON
Table of values
a. Microphone.
b. Monitor status light and capacitive menu access
(in standby) / slave monitor communication start
button.
c. Communication with hearing aids (PENTHA GB2/H).
Set the hearing aid switch to T-mode, see p. 8.
d. Speaker.
e. 7” TFT colour screen.
f..'Do not disturb' mode LED.
g. 'Divert call' mode LED.
h. Vertical wiring entry.
i. Connector fixings.
j. Con ector.n
k. DIP switch.
l. Bus connection terminals.
k
l
i
j
e
123
ON DIP
4 5 6
h
i
h
d
a
c
MicroSD card
(Max. 16GB
Class 10)
g
f
b
'Divert call' mode LED:
Off: 'Divert call' mode disabled.
On: 'Divert call' mode enabled.
LED :S
'Do not disturb' mode LED:
Off: 'Do not disturb' mode disabled.
On: 'Do not disturb' mode enabled.
Function push button / Monitor status light:
Monitor status light:
Standby: Light fixed (low intensity).
Call: Light blinking.
Communication: Light fixed.
Missed call: Low and variable intensity light.
123
ON DIP
4 5 6
( ):WHITE HZ+
( ):GREEN HZ-
PENTHA MONITORG 2B
Function push button: Menu access (in standby) /
During a call process, it initiates communication
in a slave monitor (unless the 'display image in
call' function is enabled - see 'System operation'
on p. 3).

5
DESCRIPTION OF THE MONITOR
Setting the monitor's address codes (addresses 0 to 31):
DIP 6: Configures the end of line. Leave in the ON position in monitors where the video cable terminates. Set to OFF in
intermediate monitors only.
1 2 3
ON DIP
4 5 6
Co 0/32de
123
ON DIP
4 5 6
Co 01de
123
ON DIP
4 5 6
Co 02de
123
ON DIP
4 5 6
Co 03de
123
ON DIP
4 5 6
Co 04de
123
ON DIP
4 5 6
Co 05de
123
ON DIP
4 5 6
Co 06de
123
ON DIP
4 5 6
Co 07de
1 2 3
ON DIP
4 5 6
Co 08de
123
ON DIP
4 5 6
Co 09de
123
ON DIP
4 5 6
Co 10de
123
ON DIP
4 5 6
Co 11de
123
ON DIP
4 5 6
Co 12de
123
ON DIP
4 5 6
Co 13de
123
ON DIP
4 5 6
Co 14de
123
ON DIP
4 5 6
Co 15de
123
ON DIP
4 5 6
Co 16de
123
ON DIP
4 5 6
Co 17de
123
ON DIP
4 5 6
Co 18de
123
ON DIP
4 5 6
Co 19de
123
ON DIP
4 5 6
Co 20de
123
ON DIP
4 5 6
Co 21de
123
ON DIP
4 5 6
Co 22de
123
ON DIP
4 5 6
Co 23de
123
ON DIP
4 5 6
Co 24de
123
ON DIP
4 5 6
Co 25de
123
ON DIP
4 5 6
Co 26de
123
ON DIP
4 5 6
C 27ode
123
ON DIP
4 5 6
Co 28de
123
ON DIP
4 5 6
Co 29de
123
ON DIP
4 5 6
Co 30de
123
ON DIP
4 5 6
Co 31de
DIP 1 to DIP 5: To set the monitor address (addresses 0 to 31).
123
ON DIP
4 5 6
DIP 6 to ON DIP 6 to OFF
123
ON DIP
4 5 6
( )
**
( )
** Important:
-In door panel systems with call buttons, the first address on the monitor is 'Code 0'.
-In coded panel systems (N3301/GB2), 'Code 0' is 'Code 32', which means that when a call is made to a monitor with
'Code 0' (DIP 1 to DIP 5 set to OFF), it needs to be entered on the N3301/GB2 numeric keypad.
-In the software (Address Manager GB2), 'Code 0' is also shown as 'Code 32'.
23
PENTHA MONITORG 2B

INSTALLING THE MONITOR IN A WALL MOUNTING CONNECTOR
The top of the connector must be positioned at a height of 1.60m. The minimum distance between the sides of the
connector and the closest object must be 5cm.
Positioning the wall mounting connector:
Fix the monitor's wall mounting connector to the wall by drilling two 6mm diameter holes and using the screws and plugs
supplied with the monitor.
Fixing the monitor's wall mounting connector to the wall:
Positioning the monitor:
1 2 3
Avoid dusty or smoky environments or locations near sources of heat.
6
Connect the cables to the monitor (see p. 4), position the monitor in front of the wall mounting connector, ensuring
that the holes in the base of the monitor line up with those on the connector , and then move the monitor
downwards until the monitor is securely fixed to the connector .
Remember to remove the protective covering from the front of the monitor once installation is complete.
1
23
1 6. 0m
x4 30
PENTHA MONITORG 2B

INSTALLING THE MONITOR IN AN EMBEDDING BOX
Make a hole in the wall to position the top of the universal embedding box at a height of 1.60 m from the ground. The
minimum distance between the sides of the embedding box and the closest object must be 5 cm.
Positioning the embedding box:
1 6. 0m
Pass the cable through the hole made in the embedding box. Embed the box and ensure that it is level and flush.
Fix the wall mounting connector of the monitor to the embedding box with the screws supplied.
Positioning the embedding box and fitting the wall mounting connector:
Avoid dusty or smoky environments or locations near sources of heat.
Screws supplied with
the embedding box.
7
Positioning the monitor:
Connect the cables to the monitor (see p. 4), position the monitor in front of the wall mounting connector, ensuring
that the holes in the base of the monitor line up with those on the connector , and then move the monitor
downwards until the monitor is securely fixed to the connector .
Remember to remove the protective covering from the front of the monitor once installation is complete.
1
23
PENTHA MONITORG 2B
1 2 3

OPERATION
When a call is received, the monitor(s) will play a melody, the status light of the monitor(s) will blink and show the image
of the door panel on the main monitor without alerting the visitor. If the call is not answered within 40 seconds the
monitor returns to standby mode.
The monitor automatically takes a photo or records a video (MicroSD card required for video).
1.1 Receiving a call from the door panel:
Monitor description when receiving a call and during communication:
8
Continued overleaf
T
Communication with hearing aid (Pentha GB2/H monitor only):
Make sure that the hearing aid is 15-25 cm away from the
monitor to ensure maximum audio quality during
communication with the door panel.
PENTHA MONITORG 2B
00:30 -1PL
Call/communication time elapsed.
Door panel that made the call.
Enable lock release 1.
Start communication.
End call/communication.
Recording
Door enabled.2
Photo or video capture enabled
(MicroSD card required for video recording).
Communication enabled.
2
Door 1 enabled.
1
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release .2
Screen settings, monitor volume, activating
the light, CCTV camera picture selection
(DQ-CAM-GB2 module required).
Start communication.
(Only if it is a slave monitor).
To open door 1, press the door release option on the screen during the call process: one press will activate the
lock release for 5 seconds.
To open door 2, press the door release option on the screen during the call process: one press will activate the
lock release for 5 seconds.
Start communication.
End call/communication.
Enable lock release 1.
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release .2
Screen settings, monitor volume, activating
the light, CCTV camera picture selection
(DQ-CAM-GB2 module required).
1
2
00:30 -1PL

OPERATION
When a call is received, the monitor(s) will play a melody, the status light of the monitor(s) will blink and show the image
of the door panel on the main monitor without alerting the visitor. To end the call, press option on the screen of the
monitor.
To open door 1 or 2, press option / on the screen of the monitor during the call process: one press will activate
the door release 1 or 2 for 5 seconds.
1.3 Ending a call from the door panel:
Continued from previous page.
1.2 Call not answered (missed call):
To open door 1, press the door release option
during the call or communication process:
one press will activate the door release for 5
seconds.
9
1.4 Answering a call from the door panel:
Start communication.
When a call is received, the monitor(s) will play a melody, the status light of the monitor(s) will blink and show the image
of the door panel on the main monitor without alerting the visitor. If the call is not answered within 40 seconds the
monitor returns to standby mode.
The monitor automatically takes a photo or records a video (MicroSD card required for video).
To open door 2, press the door release option
during the call or communication process:
one press will activate the door release for 5
seconds.
To open door 1, press the door release option
on the screen during the call process: one
press will activate the lock release for 5
seconds.
To open door 2, press the door release option
on the screen during the call process: one
press will activate the lock release for 5
seconds.
End call.
PENTHA MONITORG 2B
00:30 -1PL
21
11
2
00:30 -1PL
00:30 -1PL
When a call is received, the monitor(s) will play a melody, the status light of the monitor(s) will blink and show the image
of the door panel on the main monitor without alerting the visitor. The monitor automatically takes a photo or records a
video (MicroSD card required for video). To answer a call, press option on the master monitor screen or the
logo on the front of any slave monitor in the apartment (unless the 'display image in call' function is activated
on the slave monitor, in which case, option must be pressed). If the monitor is a PENTHA GB2/H with icon on
the front, make sure that the hearing aid is 15 and 25 cm away from the monitor to ensure maximum audio quality
during communication with the door panel.
Communication will last for 90 seconds or until option on the screen is pressed.
To open door 1 or 2, press option / on screen during the communication or call processes: one press will enable
the lock release for 5 seconds.
1 2
11
2
End communication. Continued overleaf

OPERATION
Continued from previous page.
10
PENTHA MONITORG 2B
1.5 Answering a call from the door panel (activating the light and displaying pictures from
DQ-CAM-GB2 cameras):
Start communication.
To open door 1, press the door release option
during the call or communication process:
one press will activate the door release for
5 seconds.
To open door 2, press the door release option
during the call or communication process:
one press will activate the door release for
5 seconds.
00:30 -1PL
When a call is received, the monitor(s) will play a melody, the status light of the monitor(s) will blink and show the image
of the door panel on the main monitor without alerting the visitor. The monitor automatically takes a photo or records a
video (MicroSD card required for video). To answer a call, press option on the master monitor screen or the
logo on the front of any slave monitor in the apartment (unless the 'display image in call' function is activated
on the slave monitor, in which case, option must be pressed). If the monitor is a PENTHA GB2/H with icon on
the front, make sure that the hearing aid is 15 and 25 cm away from the monitor to ensure maximum audio quality
during communication with the door panel.
Communication will last for 90 seconds or until option on the screen is pressed.
To open door 1 or 2, press option / on screen during the communication or call processes: one press will enable the
lock release for 5 seconds.
1 2
11
2
End communication.
Continued overleaf
During the communication process, the following functions can be performed:
00:30 -1PL
Communication time elapsed (communication time of 90 seconds).
Door panel that made the call.
Enable lock release 1 (relay 1 of the door panel).
End communication.
Communication enabled.
Take photo or record video manually from the door panel.
Video recording (MicroSD card required).
Go to 2nd selection screen.
Enable lock release 2 (relay 2 of the door panel).
00:30 -1CM
Adjust brightness, contrast, colour and communication
volume (see pp. 12-13).
Display image from door panel that made the call.
(See p. 11).
Activate external light (SAR-GB2 module required).
Go to 1st selection screen.
Adjust screen format (see pp. 12-13)
Select CCTV camera pictures, see p. 11.
(DQ-CAM-GB2 module required)
2nd selection screen
1st selection screen

OPERATION
Continued from previous page.
11
PENTHA MONITORG 2B
Then, by displaying the picture from camera 1 'CM - 1' selected and maintaining audio communication (with the door
panel that made the call), the following functions can be performed:
00:30 -1CM
Communication time elapsed (communication time of 90 seconds).
Picture from the camera selected.
Enable lock release 1 (relay 1 of the door panel in communication).
End communication.
Communication enabled (with the door panel that made the call).
Take photo or record video manually from the camera selected.
Video recording (MicroSD card required).
Go to 2nd selection screen.
Enable lock release 2 (relay 2 of the door panel in communication).
00:30 -1CM
Adjust brightness, contrast, colour and communication volume
(see pp. 12-13).
Display image from door panel that made the call.
Activate external light (SAR-GB2 module required).
Go to 1st selection screen.
Adjust screen format (see pp. 12-13)
Select CCTV camera pictures.
(DQ-CAM-GB2 module required)
2nd selection screen
1st selection screen
To display the picture from one of the installed cameras, press option . The following selection screen will be displayed.
(DQ-CAM-GB2 camera module required).
00:30 -1PL 00:30 -1PL
Then press option ; the following camera selection screen will be displayed. Press the option corresponding to the
'CM' camera whose picture needs to be displayed.
00:30 -1PL
Select camera
CM - 1
CM - 2
CM - 3
CM - 4
Exit the camera selection screen.

Normal Bright Soft User
5
5
5
6
SCREEN AND VOLUME SETTINGS MENU
12
To access the screen and volume settings menu in the monitor, it must be in communication or auto switch-on
mode. Then press option and the 1st selection screen will be displayed.
PENTHA MONITORG 2B
00:30 -1PL 00:30 -1PL
To access scene settings, press option . The following selection screen will be displayed; select the type of picture
required (normal, bright, soft or user) by pressing the respective option. Press the door panel image shown on the
screen to exit and return to the 1st selection screen.
1st selection screen
00:30 -1PL
To access the brightness, contrast and colour settings, press option . The following selection screen will be
displayed; press option or in each selection field to increase or decrease contrast , brightness and
colour . Press the door panel image shown on the screen to exit and return to the 1st selection screen.
1st selection screen
00:30 -1PL
Normal Bright Soft User
5
5
5
6
To access the monitor's volume setting, press option . The following selection screen will be displayed; press
option or in selection to increase or decrease the volume. Press the door panel image shown on the screen
to exit and return to the 1st selection screen.
1st selection screen
00:30 -1PL
Normal Bright Soft User
5
5
5
4
Continued overleaf

SCREEN AND VOLUME SETTINGS MENU
13
PENTHA MONITORG 2B
Continued from previous page.
To access the screen format setting, press option . The following selection screen will be displayed; select the
type of screen format required by pressing the respective option.
1st selection screen
00:30 -1PL 00:30 -1PL
4:3
16:9
16:9
Press option to exit and return to the 1st selection screen.
1st selection screen
00:30 -1PL
00:30 -1PL
4:3
16:9
16:9
Press option to exit the screen and volume settings menu.
1st selection screen
00:30 -1PL 00:30 -1PL
Press option to end communication or auto switch-on.
00:30 -1PL
Monitor in standby

To access the menu, the monitor must be in standby. Then click on the screen or the logo on the front of the
monitor. The main menu options screen will then appear.
Main menu screen
Continued overleaf
USER MENU
14
PENTHA MONITORG 2B
Camera
Door
Mes a ess g Media Call
Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
1.1 Displaying the main door panel image:
To display the main door panel image, press 'Camera / Door'. The following selection screen will be displayed. Press
option 'PL - 1'.
The following screen will display the image from the door panel with address 1, indicating the door panel selected
'PL-1' and the connection time elapsed. The connection will last for 30 seconds or until option is pressed.
C m raa e
Door
Mes a ess g Media Call
Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
Camera Door/
PL - 1
PL - 2
PL - 3
PL - 4
CM - 1
CM - 2
00:30 -1PL
Start communication.
End auto switch-on (return to the selection screen).
Enable lock release 1.
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release .2
Screen settings, monitor volume, activating the light,
CCTV camera picture selection (DQ-CAM-GB2 module
required). (See settings pp. 12-13).
To open door 1, press the door release option on the screen during the picture display process: one press will
activate the lock release for 5 seconds.
To open door 2, press the door release option on the screen during the picture display process: one press will
activate the lock release for 5 seconds.
1
2

USER MENU
15
PENTHA MONITORG 2B
To establish audio and video communication with the door panel selected, press option . The screen will display
symbol . If the monitor is a PENTHAGB2/H with icon on the front, make sure that the hearing aid is between 15
and 25 cm away from the monitor to ensure maximum audio quality during communication with the door panel.
Connection will last for 30 seconds or until option is pressed.
Continued from previous page.
To open door 1, press the door release option on the screen during the communication process: one press will
activate the lock release for 5 seconds.
To open door 2, press the door release option on the screen during the communication process: one press will
activate the lock release for 5 seconds.
1
2
Start communication.
End auto switch-on (return to the selection screen).
Enable lock release 1.
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release .2
Screen settings, monitor volume, activating the light, CCTV
camera picture selection (DQ-CAM-GB2 module required).
(See settings pp. 12-13).
00:30 -1PL
1.2 Displaying images from the door panels:
To display the image from one of the installed door panels, press 'Camera/Door'. The following selection screen
will be displayed. Press the option corresponding to the 'PL' door panel whose image needs to be displayed.
The following screen will display the image from the door panel with address 2, indicating the door panel selected
'PL-2' and the connection time elapsed. The connection will last for 30 seconds or until option is pressed.
C m raa e
Door
Mes a ess g Media Call
Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
Camera Door/
PL - 1
PL - 2
PL - 3
PL - 4
CM - 1
CM - 2
00:30 -PL 2
Start communication.
End auto switch-on (return to the selection screen).
Enable lock release 1.
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release .2
Screen settings, monitor volume, activating the light, CCTV
camera picture selection (DQ-CAM-GB2 module required).
(See settings pp. 12-13).
To open door 1, press the door release option on the screen during the picture display process: one press will
activate the lock release for 5 seconds.
To open door 2, press the door release option on the screen during the picture display process: one press will
activate the lock release for 5 seconds.
1
2
Continued overleaf
This symbol is only displayed in communication enabled mode.

USER MENU
16
PENTHA MONITORG 2B
This symbol is only displayed in communication enabled mode.
To establish audio and video communication with the door panel selected, press option . The screen will display
symbol . If the monitor is a PENTHA GB2/H with icon on the front, make sure that the hearing aid is between
15 and 25 cm away from the monitor to ensure maximum audio quality during communication with the door panel.
Connection will last for 30 seconds or until option is pressed.
Continued from previous page.
To open door 1, press the door release option on the screen during the communication process: one press will
activate the lock release for 5 seconds.
To open door 2, press the door release option on the screen during the communication process: one press will
activate the lock release for 5 seconds.
1
2
Start communication.
End auto switch-on (return to the selection screen).
Enable lock release 1.
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release .2
Screen settings, monitor volume, activating the light, CCTV
camera picture selection (DQ-CAM-GB2 module required).
(See settings pp. 12-13).
00:30 -PL 2
1.3 Displaying camera pictures (DQ-CAM-GB2 module required):
To display the picture from one of the installed cameras, press 'Camera/Door'. The following selection screen will
be displayed. Press the option corresponding to the 'CM' camera whose picture needs to be displayed.
Continued overleaf
Camera
Door
Mes a ess g Media Call
Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
Camera Door/
PL - 1
PL - 2
PL - 3
PL - 4
CM - 1
CM - 2
Camera Door/
CM - 3
CM - 4
Quad - 1
1st selection screen
2nd selection screen
-Press option to display the 2nd selection screen
-Press option to display the 1st selection screen
-Press option 'Quad-1'; the monitor will display the
pictures from all of the cameras.
Main menu screen
-Press option to return to the main menu screen.

The following screen will then display the picture from the camera selected with address 4, indicating the camera
selected 'CM-4' and the connection time elapsed.
The connection will last for 30 seconds or until option is pressed.
USER MENU
17
PENTHA MONITORG 2B
Continued from previous page.
00:30 -CM 4
No function.
End auto switch-on (return to the selection screen).
No function.
Take photo or record video manually.
Video recording (MicroSD card required).
No function.
Screen settings, monitor volume, activating the light, CCTV
camera picture selection (DQ-CAM-GB2 module required).
(See settings pp. 12-13).
Camera
Door
Mes a ess g Media Call
Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
Main menu screen
Camera/Door
PL - 1
PL - 2
PL - 3
PL - 4
CM - 1
CM - 2
1st selection screen
To exit and return to the main menu screen, press option .
2.1 Text messages:
To access the text message functions, press option 'Messages'. The following selection screen will be displayed.
C m raa e
Door
Me sa ess g Media Call
Log
Intercom Divert
Phone
Light Call
Options
14:14
Mon .
05 / 06 / 2017
To send a text message, press option . The following recipient selection screen will be displayed.
Select Recipient
[ 00 ] Sr. García
[ 01 ] Sr. Fernández
[ 02 ] Sr. Correa
[ 03 ] Sra. López
[ 04 ] Sra. Vicario
[ 05 ] Sra. Herrera
Recipient selection screenSelection screen
Continued overleaf
Write
Message
OutboxInbox
Write
Message
OutboxInbox

Then press the apartment to which the text message needs to be sent.
USER MENU
18
PENTHA MONITORG 2B
Continued from previous page.
Select Recipient
[ 00 ] Sr. García
[ 01 ] Sr. Fernández
[ 02 ] Sr. Correa
[ 03 ] Sra. López
[ 04 ] Sra. Vicario
[ 05 ] Sra. Herrera
Recipient selection screen
Scroll backwards in the residents list.
Return to the selection screen.
Scroll forwards in the residents list.
The following screen will be displayed; use the keypad to enter the text message (up to 78 characters).
[ 02 ] Sr. Fernandez
I have found your keys.
Apartment selected.
Screen (text message up to 78 characters).
Alphabetical keypad.
Access the numeric keypad.
Key to delete characters.
Send SMS ok ! Message sent successfully.
Key to send text message.
Return to the recipient selection screen.
Continued overleaf
Press option to return to the recipient selection screen.
Select Recipient
[ 00 ] Sr. García
[ 01 ] Sr. Fernández
[ 02 ] Sr. Correa
[ 03 ] Sra. López
[ 04 ] Sra. Vicario
[ 05 ] Sra. Herrera
Recipient selection screen Selection screen
Write
Message
OutboxInbox
Then press option to go to the selection screen.

Then press the message that you want to read. The following screen will be displayed.
USER MENU
19
PENTHA MONITORG 2B
Continued from previous page.
Messages received screen
Time Received ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
Down arrow indicates incoming text message.
14 - 06 10 : 46 [ 01 ] Sr. Fernández
I have found your keys.
Access the recipient selection screen to write a text message
(see pp. 17-18 'Text messages').
Delete this message.
Make a call to the apartment that sent the text message.
Return to the messages received screen.
14 - 06 10 : 46 [ 01 ] Sr. Fernández
I have found your keys.
Date / time and apartment sending the message.
Message.
To read text messages received, press option . The following text messages received screen will be displayed.
Icon will indicate if any new messages have been received and the latest message(s) will be in red.
Messages received screen
Selection screen
Access the recipient selection screen to write a text message
(see pp. 17-18 'Text messages').
Delete all messages received.
Page 01 of a total of 03 pages is displayed.
Messages received screen
Go to the next page.
Go to the previous page.
Return to the selection screen.
Time Received ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
Time Received ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
Write
Message
OutboxInbox
1
Continued overleaf
Press option to return to the messages received screen.
1

USER MENU
20
PENTHA MONITORG 2B
Continued from previous page.
Selection screen
Messages received screen
Time Received ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
Write
Message
OutboxInbox
Then press option to go to the selection screen.
Then press the message sent that you want to read. The following screen will be displayed.
Messages sent screen
Time Received ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
14 - 06 10 : 46 [ 01 ] Sr. Fernández
I have found your keys.
To read text messages sent, press option . The following text messages sent screen will be displayed.
Messages sent screen
Selection screen
Access the recipient selection screen to write a text message
(see pp. 17-18 'Text messages').
Delete all messages sent.
Page 01 of a total of 03 pages is displayed.
Messages sent screen
Go to the next page.
Go to the previous page.
Return to the selection screen.
Time Sent ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
Time Sent ameN 01 / 03
14 - 06 10 : 46 [ 01 ] Sr. Fernández
02 - 06 18 : 34 [ 03 ] Sra. López
23 - 05 12 : 16 [ 00 ] Sr. García
17 - 05 08 : 33 [ 02 ] Sr. Correa
11 - 04 17 : 25 [ 04 ] Sra. Vicario
05 - 03 21 : 10 [ 05 ] Sra. Herrera
Write
Message
OutboxInbox
indicates error in text message sent (e.g. apartment without Pentha monitor).
Continued overleaf