Anywhere TK108 User manual

G
GP PS S T Tr ra ac ck ke er r
Anywhere Quick start guide

Thanks for choose our product. This Quick Start guide tells you how to set
up your GPS Tracker.
Please charge 12hours at first use.
Insert SIM card in right way. Please put the unit outside and make sure th
e trademark side facing up.
Press above 3 seconds，activation will be finished when the blue LED
converted to one second flashes, SIM card Registration Successful, LED li
ght was converted to three seconds blinking GPS positioned successfully.L
ED off in sleeping mode
Confirm your SIM card have calling, send SMS, GPRS function.
Confirm your SIM card have enough balance (money).
Confirm your SIM card can show caller ID and don not use call forwarding
function.

How to put in SIM card.and SD card

TF card*.
Support 2GB TF card, over-the-air update, resume from break point
cannot work without TF card.
Over the air update.
Update can be finished by SMS ,and also the software on our website will
be update occasionally.
Breakpoint continuingly.
Date will be saved at SD card when in weak GPRS signal and will be send
to platform automatically again when have GPRS signal.
Password.
We suggest change the password and keep it in mind. Please contact with
franchiserif you forgot it, Unit only work with correct one.

Authorization.
SMS will be send to Authorized number. Authorized number can send the
command without password.
Traffic Mode
When moved ,the device will send GPS data to monitor platform or mobile
phone automatically; when stay still, the device will go to sleep to save power.
Now you can operate the function . Begin !

Internet monitor.
Set APN.
APN stands for Access Point Name. For
examplepicture , China mobile “CMNET”,
send SMS“123456apn cmnet”to the
unit；if APN have user name and
password, For example picture ,
Microcell，APN is internet, user name：
fido , password：fido.

IP and port.
When APN setting succeed, send SMS“1234
56adminip 119.147.23.100 2337”，it will r
eply“ADMINIP ok!”.“2337”is port number.
Data transmission.
Send SMS:“123456t010s***n”to the unit,
will reply”t010s***n ok!”.Data will be
transmissionto the platform every 10
seconds.
Stop send sms “123456tmno”to t
he unit, will reply ” tmno ok”

Internet platform.
Please contact franchiser.
They will supply you
platform website, User
name, Password and help
you to add your unit into
platform.
You can check more
information about platform
in CD-ROM.

Authorization and Password*
Call the unit for 10 times and successful
positioning. This number will be the defaul
t for authorized number.
Send SMS "123456 admin 159200XXXXX
" to the unit, it will be authorized of this nu
mber. Only 5 numbers able to be authorizat
ion. If need cancel, send”123456admin”.
ord 000000”to unit，will reply“passw
ord 000000 ok!”.Notice：123456=old pass
word, 000000=new password.

One time.
Using your mobile phone call the inside
number of unit .it will hang up and reply to
a real time positioning messages. Contents
include: latitude, longitude, speed, date,
battery, signal, IMEI number.
Send SMS "123456smslinkone" to the
unit, will reply message.

Successive positioning.
Send SMS “123456t030s002n” to the
unit, Will reply “t030s002n ok!” It will
report the real time SMS at 30s interval for
2 times. Notice: s=second, minute, h=hour.
The shortest interval time is 005s, the
longest interval time is 255h; Reply the
most times is 999n, Unlimited times is***n.

Monitor.
Send "123456monitor”to the unit, will
reply”monitor ok!”，then call the unit to
enter into the monitor mode .Send
“123456tracker”to the unit when need to
cancel , it will reply “tracker ok!”back into
the positioning mode again.

Traffic mode.
Send SMS "123456traffic 5" to the unit,
will reply "traffic 5 ok!". 5 stands for the
sensibility level, setting from 0 to 10. 0
means closing the function. When moving,
the unit will send GPS data to monitor
platform or mobile phone automatically
every 30 seconds;
when stay still, the unit will go to sleep.
Send "123456traffic 0”when needs to
cancel.

Sensor alarm.
Send SMS "123456shake 5" to the
unit,it will reply "shake 5 ok!". The unit will
send alarm message to phone when shake.
Send SMS“123456shake 0” when needs to
cancel the function. Number 5 stands for
the sensibility level, setting from 0 to 10. 0
means closing the function. Notice: This
function cannot work when in traffic mode.

Overspeed alarm.
SendSMS“123456speed 050”to the
unit,it will reply “SPEED ok!”. When the
unit moves exceeding 50 km/h, the unit will
send SMS alarm. When the speed is no
more than 50km/h, it will send alarm as
well. Send “123456speed 0”when needs to
cancel. Notice: Speed alarm is set at least
50km/h.

Movement alarm.
When the unit stays immobile in a
place for more than 3 minutes, send
SMS“123456move 200”to the unit, it will
reply“move 200 ok!". It will send alarm SMS
when moves out of 200 meters.Send
SMS“123456move 0”when needs to cancel.

Geo fence.
Set Geo fence for the unit to restrict it
movement within a district. The unit
will send SMS to the authorized numbe
rs when it breaches the district. If
needs Send SMS"123456stockade 2258
9155N,113.827732E;22.559000N,113.8971
11E”.
stop send“123456stockade”

Total mileage calculation.
If you want to calculate the mileage,
according to the following steps:
1. Send SMS“123456gprsdata 1”to the
unit.
2. Send SMS “123456t010s***n”to the
unit.
3. Send SMS “123456km0”to the unit.
4. Send SMS “123456km？”,it will reply
the mileage dates.

SOS.
Press the SOS for 3 secondwhen
dangerous. It will send“ help me ” to all the
authorized numbers.

Map link.
There are two
formats: date format,
map link format. Send
SMS“123456smslink ”to
the unit, it will reply
“smslink ok”，then call
the unit again, it will
reply map link, access to
this website may view
location map. Send
SMS“123456smstext”to
the unit will restore to date format.