!
!
Your tablet comes equipped with an easy to
use touchscreen which allows access to the
tablet's functions. Use your nger tip to touch
the area of the screen where a control icon is
displayed. If you touch and hold the screen, it
will register as a continuous button press.
The tablet contains a sensor that will automati-
cally change the orientation of most screens as
you rotate the tablet. The sensor works best
when the tablet is rotated perpendicular to the
ground (i.e., when the tablet is held upright and
not at on its back).
The orientation sensor can be
turned on and off in the Display
settings menu.
To activate an on-screen item (e.g.,application
icons, buttons, menu items, and the
letter/symbols of the on-screen eyboard),
simply touch them with your nger.
Some on-screen items have an alternate
action if you touch and hold it (e.g., opening
an alternate menu, or to activate the drag
function). to touch and hold an item, touch
the item and do not lift your nger until the
action occurs.
Drag an on-screen item to change its position
(e.g., an application icon on the home screen).
To drag an item, touch and hold it for a
moment, then without lifting your nger, move
your nger on the screen until the item
reaches its target destination.
Quickly tap the screen twice on a webpage or
other application screen to zoom (the
application must support the double-tap/-
zoom function). Within the browser,
double-tapping a webpage section will cause
the browser to zoom and t that section
to the width of the screen.
Swipe up/down on the screen to scroll
through a list. On some screens, you may be
able to swipe left/right to change the view.To
swipe, touch the screen and then quickly
move your nger across the screen without
lifting your nger. Do not pause on the screen
with your nger at the initial point of contact
or you may accidentally drag an item instead.
To avoid damaging the screen, do not touch it with
excessive force or with any object other than your
nger. For best response, make sure your hands
are clean before using the touchscreen controls.
Note: All screens may not support screen
orientation feature and also screen
orientation depends upon apps too.
A thin lm has been applied to the
touchscreen to protect it during shipping. The
protective lm should be removed before use.
To remove it, simply take a corner of the lm
and peel it away from the screen.
You can control the functions of the tablet by
using the touchscreen. To control the tablet
with the touchscreen, use your nger to
manipulate icons, buttons, menu items, the
onscreen key-board, and other items displayed
on the screen.
You can perform the following actions on the
touchscreen using your ngertip.
Page 4 Product image Know your AOC Tablet
About the Touchscreen About the Orientation Sensor
(G-Sensor)
TOUCH:
TOUCH
AND
HOLD:
DRAG:
SWIPE:
Double
Tap:
Protective Film
Touchscreen Actions