APAC Opto Electronics APH44030 User manual

Pico Projector
Owner’s Manuel
Please read this owner’s manual carefully before operating the unit.

- 1 -
TABLE OF CONTENTS
1. Introduction…………………………………………..2
2. Safety precautions………………………………….3
3. Package contents…………………………………...5
4. Product overview……………………………………6
5. How to use the projector……………….………11
6. Troubleshooting..……………………………………23
7. Specifications………………………………………….25

- 2 -
LCOS projector technology
Latest LED technology
4:3 aspect ratios and 640X480 VGA resolution
Built in stereo speaker
Built in high capacity battery
Support a wide range of media formats
Introduction

- 3 -
Please read this manual carefully before using your projector and
keep the manual handy for future reference.
1. Turn off the machine before cleaning.
2. Use normal glass cleaner and a soft cloth to clean.
3. Operate in low light conditions for best effect
4. If the projector is not to be used for an extended period of
time, disconnect the plug from the power outlet.
5. Use only authorized parts and accessories.
1. Do not obstruct the vents.
2. Do not submerse your projector in liquid.
3. Do not place any liquids on top of your projector.
4. Do not operate under the following conditions：
—Too hot, cold, or humid environments
—Dusty and dirty environments.
—Near strong magnetic fields.
—Under direct sunlight.
Do：
Safety Precautions
Do not：

- 4 -
1. Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
2. Use appropriate power supply.
3. Dropping or jarring your projector can damage internal
components.
4. Do not attempt any repair yourself.
Safety Certification：UL、CE、CCC, BSMI
Warning：

- 5 -
Make sure your box contains everything listed. If any pieces are
missing, contact your dealer.
Standard Accessories：
1. Power adaptor
2. Projector
3. AV cable
4. USB cord
5. Tripod
6. Remote control
7. Owner’s manual
Optional Accessories：
1. iPad/iPhone out line
2. USB to mini USB converter
3. Micro SD 2G
4. Micro SD 4G
Package contents

- 6 -
Front/Back view
1. Lens 2. Speaker
3. Infrared receiver
Left/Right view
Product Overview

- 7 -
1. AV in 2. SPEAKER OUT
3. Volume knob 4. TF card slot
5. ON/OF 6. DC IN
7. USB port
Top/Bottom view
1. Vent 2. Focus ring
3. Plastic protection pad 4. Tripod Mount
5. Control panel.

- 8 -
: press for 2 seconds to turn on/off
: Return to previous menu
: Switch between AV/PMP
: Up/play the previous file
: Down/play the next file
: Left/rewind/turn the picture counter clock wise
: Left/forward/turn the picture clock wise
ENTER: Confirm/Start/Slide mode
Remote control
This projector comes with an
infrared remote control, please
take off the battery protection slip
before usage.
Functions are as follows：
: Turn off
SOURCE: Switch between AV/PMP
: Mute on/off
PHOTO : Slide mode
VIDEO : Video mode

- 9 -
MUSIC : Music mode
MENU : PMP menu
EXIT : back to the previous menu
/ : Up/Down in menu, Next/previous music,
Video or picture
/: Left/Right in menu, rewind/fast forward in music and
video mode, turn the picture in picture mode.
ENTER : confirm/execute the selection, pause/play in video
and music mode, single picture or slideshow in picture mode.
VOL± : volume control
SETUP : back to PMP main menu
ZOOM : Zoom 125%/150% /175% /200% /225% /250%
DEL : Delete current picture in slide mode

- 10 -
Note：the effective range of
the remote control is 8 meters
/±30°, please point the remote
control at the infrared receiver and
stay in effective range（like the
picture to the right）
This remote control uses CR2025 type battery, please follow
the following replacement instructions when replacing：
8M
30
°
30
°
Remote Control

- 11 -
Connection to AV equipment（DVD/set top box）
AV SPK
红色
白色
黄色
Connecting TF card
Note：Please make sure the copper connectors are facing
upwards when inserting the card：
How to use the projector

- 12 -
Connecting to USB equipment
Connecting to stereo equipment
Turn on the power
1. Connect the projector before turning it on (see previous
page).

- 13 -
2. Plug the power cord into the power outlet, the other end
into the DC IN on the projector; flip the power switch to
“ON”, now the power led should turn red.
3. Press POWER button for two seconds, the power led will
turn green, fan will start, and image will appear after 5
second.
Turn off projector power
1. Turn off the projector by pressing the power button for
two seconds.
2. Flip the power switch on the right to “OFF.”
Using rechargeable battery
1. This projector comes with an internal rechargeable battery,
when the battery is charged; it can operate without power
adapter.
2. When the battery level is low, connecting the power
adaptor will allow continued operation. To continue
charging the battery, first flip the power switch to “OFF,”
connect the power adaptor, then flip the power switch to

- 14 -
“ON.” It will take over 4 hours to become fully charged.
3. If the projector is not to be used for an extended period of
time, flip the power switch on the right to “OFF,”to save
power.
Focusing the lens
Depending on distance, the image will be fuzzy and out of
focus sometimes, to correct this, turn the focus ring till the
image is clear and sharp.
Playing multimedia files in flash disk and TF card
Preparation:

- 15 -
1. Plug in the Flash disk or TF card.
2. Turn on the projector.
The following screen will appear:
Use the / button on the remote control or the control
panel to select Flash disk or TF card.
Note: this machine will automatically recognize the disk or card.
If no disk or card is plugged in, the picture in the menu will be
gray, it will turn larger when plugged in and selected.
Display picture
1. Press / button to choose the media source.

- 16 -
2. Press / button on the remote control or control
panel to select picture, then press ENTER button to play; or
press the photo button on the remote control.
3. While showing, press / button to switch to
previous/next picture, press / button to turn
picture.
4. Press ZOOM button to zoom to
125%/150%/175%/200%/225%/250%, press DEL button to
select and delete current picture or to save picture to
projector memory.
5. Press ENTER button to switch to slide view, press again to
return to normal mode.
6. Press EXIT button to return to picture list, press again to
return to main menu.
Note：Background music will be playing in slide mode, adjust
volume then by pressing VOL-/VOL+ button on the remote
control.
Play video
1. Press / button to select the media source.
2. Press / button to select video, then press ENTER

- 17 -
button, or the VIDEO button on the remote control to play.
3. While video is playing, press / button to switch to
previous/next video, / button to rewind/fast
forward, press Enter button to pause/play, and VOL-/VOL+
to adjust volume.
4. Press EXIT button to return to video list, press again to
return to main menu.
Play music
1. Press / button to select the media source.
2. Press / button to select video, then press ENTER
button, or MUSIC button on the remote control to play.
3. While music is playing, press / button to switch to
previous/next music, / button to rewind/fast
forward, press ENTER button to pause/play, and
VOL-/VOL+ to adjust volume.
4. Press EXIT or MENU button to end and return to main
menu.
Play PowerPoint file

- 18 -
1. Open the PowerPoint file in the computer then
save it as JPEG file. Then copy the file to flash
disk or Micro SD car.
2. Then display the file like pictures.
Note：this machine cannot recognize Word, Excel
files, user will need to convert those files into
pictures (JPG, BMP, GIF etc) to display
.
File Management
1. Press / button to select the media source.
2. Press / button to select file management, then

- 19 -
press ENTER button to enter the file management menu,
now all the files should be listed.
3. Press RIGHT button to reach the following menu：
4. To copy files, please select copy to internal or overwrite to
internal, and press ENTER button to confirm.
5. To delete files, please select delete file, and press ENTER
button to confirm.
6. Select mark all/unmark to select all or cancel.
Display setting
1. Press / button on the remote control or control
panel to select setting, then press ENTER button to enter
File manager
copy to internal?
overwrite to internal?
delete file?
mark all/unmark