Aptos Design Lab Gtrackr ADSG001-0 User manual

User Guide
Gtrackr
GPS & Wireless Locating System
ADSG001-0

01
Index
Description & Feature
Specification
Product Overview
Getting Started Driver Install
Application Install
Bluetooth GPS Receiver for Navigation
Security Tracker
Phone Number Setup
Time Interval Setup
Travel Logger
Package List
Safety Precautions
.................................................. 02
..................................................................... 03
........................................................... 04
........................................... 05
.............................................................. 07
........................... 09
............................................................... 12
...................................................... 15
.......................................................... 16
................................................................... 20
.................................................................... 27
........................................................ 28

02
Description & Feature
01
Gtrackris a data logger device that can store more than 120 hours
travelling routes. Through USB port, user can use our application to
merge the inside data with his photos for map application. It also can
be treated as a small Bluetooth-GPS receiver and combine with
handheld devices for easily navigating. Furthermore, Gtrackr utilizes
Bluetooth technology to connect with mobile phones for sending SMS
messages, GPS longitude And Latitude, to a specific GIS server.
Therefore, their relatives and friends can easily know the user’s location
through web application
► Multi–Function with all in one.
► Bluetooth GPS Receiver – working with navigation software
► Security Tracker – real time tracking on Web-based GIS server
► Travel Logger – built-in 64Mb Flash, supporting up to 450000 way points

03
Specification
02
Frequency
Accuracy
Acquisition
Open Sky
Sensitivity
LED
Operating Temperature
Storage Temperature
Channels
Power
Bluetooth
GPS
Dimension
Weight
L1, 1575.42MHz
Position 2.5m CEP, Velocity 0.1m/sec, Timing 300ns
Cold start 35 seconds average
Warm start 30 seconds average
Hot start 1 second average
-161dBm
Green – GPS status,
Blue – BT status,
Red – Charging indicator,
Orange – Low power (two-step detector)
0˚C ~ +45˚C
-20˚C ~ +45˚C
51 Channel for Acquisitions, 14 Channel for Tracking
Built-in 400mAh Li-Poly Rechargeable battery
8 ~ 10 hours
Bluetooth V2.0 Class II device
NMEA-0183 V3.01, GGA,GSA,GSV,RMC,VTG
74mm × 26mm × 16mm
29.7 g with battery

04
Product Overview
03
Bluetooth indicator (Blue)
GPS indicator (Green)
Low power indicator (Orange)
Charge indicator (Red)
Tracking Function
Navigation Function
Data Log Function
Power Slide Switch
Mini USB
(Power Charge & Connect with PC)

05
1. Insert the CD-ROM in your PC
2. The system will pop out the application
for install
3. Select Install USB Driver
Getting Started
04
Driver Install

06
Getting Started
Please follow the steps to complete the
setup.

07
Getting Started
1. Insert the CD-ROM in your PC
2. The system will pop out the application
for install
3. Select Install Application
Application Install

08
Getting Started
Please follow the steps to complete the
setup.

09
1. Slide up the switch to power on the device
2. Slide the function switch to the middle
3. Check GPS status
GPS indicator is blinking
(When Gtrackr 3D fix)
4. Check Bluetooth status
Bluetooth indicator is blinking
(When Gtrackr link with mobile phone)
Bluetooth GPS Receiver for Navigation
Slide to the Middle
Getting Started

10
1. When Bluetooth of Smart Phone is on,
use Smart Phone to search Gtrackr
2. When you press accept the device, you
need to input the pin number.
Pin code : 8888
Bluetooth
Connect with mobile phone
MAP
Getting Started

11
Getting Started
Bluetooth
MAP Check GPS and Bluetooth status:
1. The GPS & Bluetooth indicator is blinking
2. Gtrackr sends GPS Message for Smart Phone
(with Map) to Navigation.
Connect with Smartphone

12
Security Tracker
Open the power and slide the
function switch to the middle. Connect with PC by using USB cable
STEP 1 STEP 2
Getting Started

13
Getting Started
1. Please go to Device Manager to check
the COM number of CP210x USB TO
UART Bridge Controller
2. Go to Start All Programs
Aptos datalog to open the
application

14
1. Select the same COM number as
privious step.
2. Before press Connect button, please
make sure the Baudrate is 9600
Getting Started

15
Getting Started
Choose and press the “Set phone numbers”
button to setup two cell phone number and
then press the “Accept” button.
Note: These two phone numbers are for people,
parents, who want to track the location of
Gtrackr device.
Phone Number Setup

16
Choose and press the “Configure Time interval”
button to setup time interval and then press the
“Accept” button.
Time Unit: Second
Time Interval Setup
Getting Started

17
Getting Started
1. Slide up the switch to power on the device
2. Slide the function switch to the top
3. Check GPS status
GPS indicator is blinking
(When Gtrackr 3D fix)
Slide to the Top

18
Smartphone
Bluetooth
Connect Gtrackr with Smart Phone:
After previous setting and bluetooth Link
with mobile phone/smart phone, mobile
phone/smart phone sends message every
time interval to Web Server and mobile
phones of Parents or Friends as the two
phone numbers you enter.
Getting Started

19
Getting Started
4. When the child go outside and bring Gtrackr with his mobile phone, parents
can login our web service to check his/her route and location.