Aquatek WP-A1908 User manual

Visit www.aquatek.tv or email [email protected] for more information
Installation Instructions 19" Bathroom Mirror TV
In-Wall Installation Method
1. Create an opening within the chosen area
of the wall. Opening dimensions: 567mm x
352mm x 50mm (W x H x D).
2. Create a channel within the wall below the
TV recess, which allows the cables to drop
into. Channel width: 50mm.
3. Place the in-wall bracket into the recess
and use the 4 x pilot holes to drill into the
wall. Place the 4 x raw plugs into the holes
that have been drilled and screw the bracket
into position.
4. Offer the TV up to the bracket that is fixed
within the wall. Line up the 4 x metal lugs
located on the side of the TV case with the 4
x channels located within the in-wall bracket
and simply push the TV into situ.

Visit www.aquatek.tv or email [email protected] for more information
Installation Instructions 19" Advanced Bathroom TV
On-Wall Installation Method
1. Attach the female section of the VESA bracket to the wall
with the 4 x screws provided. Create each hole 8mm in radius
and 40mm deep.
2. Attach the male section of the VESA bracket to the back of
the television with the provided screws.
3. Simply offer the TV up to the wall and slide the two pieces of
the bracket into one another.