arcelik 9123 HE User manual

Washing Machine
User's Manual
9123 HE

2EN
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured in state-
of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and keep it as
a reference for future use. In case of transferring the product to someone else, give the manual
as well.
The user manual will help you use your machine in a fast and safe way.
• Read the user manual before installing and starting your product.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Read also the other documents supplied with the product.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning for electric shock.
2820522178_EN/110112.1657

3EN
TABLE OF CONTENTS
1 Your washing machine 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical specifications . . . . . . . . . . . . . 5
2 Important safety
instructions 6
General safety . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . . . 6
Children's safety . . . . . . . . . . . . . . . . . . 6
3 Installation 7
Appropriate installation location . . . . . . . 7
Removing packaging reinforcement. . . . 7
Removing the transportation locks. . . . . 7
Connecting water supply. . . . . . . . . . . . 8
Connecting to the drain . . . . . . . . . . . . . 8
Adjusting the feet. . . . . . . . . . . . . . . . . . 9
Electrical connection . . . . . . . . . . . . . . . 9
First use . . . . . . . . . . . . . . . . . . . . . . . 10
Disposing of packaging material . . . . . 10
Transportation of the product. . . . . . . . 10
Disposing of the old product . . . . . . . . 10
4 Preparation 11
Things to be done for energy saving . . 11
Sorting the laundry . . . . . . . . . . . . . . . 11
Preparing laundry for washing . . . . . . . 11
Correct load capacity . . . . . . . . . . . . . 12
Loading the laundry. . . . . . . . . . . . . . . 12
Using detergent and softener . . . . . . . 12
5 Operating the product 15
Control panel. . . . . . . . . . . . . . . . . . . . 15
Display symbols. . . . . . . . . . . . . . . . . . 15
Preparing the machine. . . . . . . . . . . . . 15
Programme selection. . . . . . . . . . . . . . 15
Main programmes . . . . . . . . . . . . . . . 16
Additional programmes . . . . . . . . . . . . 16
Temperature selection . . . . . . . . . . . . . 17
Spin speed selection . . . . . . . . . . . . . . 18
Programme and consumption table. . . 19
Auxiliary function selection . . . . . . . . . . 20
Time display . . . . . . . . . . . . . . . . . . . . 21
Starting the programme. . . . . . . . . . . . 21
Progress of programme. . . . . . . . . . . . 21
Loading door lock . . . . . . . . . . . . . . . . 22
Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . 22
Child Lock . . . . . . . . . . . . . . . . . . . . . . 22
Cancelling the programme. . . . . . . . . . 23
Machine is in Rinse Hold mode . . . . . . 23
End of programme . . . . . . . . . . . . . . . 23
6 Maintenance and cleaning24
Cleaning the detergent drawer. . . . . . . 24
Cleaning the loading door and the
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning the body and control panel . . 24
Cleaning the water intake filters . . . . . . 24
Draining remaining water and cleaning the
pump filter . . . . . . . . . . . . . . . . . . . . . . 25
7 Troubleshooting 27

4EN
1 Your washing machine
Overview
7
3
4
6
5
2
1
8
1- Power cable
2- Top panel
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose

5EN
Technical specifications
CTechnical specifications may be changed without prior notice to improve the quality of the
product.
C Figures in this manual are schematic and may not match the product exactly.
CValues stated on the product labels or in the documentation accompanying it are obtained
in laboratory conditions in accordance with the relevant standards. Depending on
operational and environmental conditions of the product, these values may vary.
Models (EN)
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Electrical input (V/Hz)
Total current (A)
Total power (W)
Spin speed (rpm max.)
Stand-by mode power (W)
Off-mode power (W)
9123 HE
9
84
60
62
74
220-240 V / 50Hz
10
2000-2350
1200
1.40
0.20

6EN
2 Important safety instructions
This section contains safety instructions that
will help protect from risk of personal injury
or property damage. Failure to follow these
instructions shall void any warranty.
General safety
• 8 years and older children and people
with reduced physical, sensory, and
mental abilities as well as unskilled
or inexperienced persons can use
this appliance provided that they are
supervised and instructed on safe use
of the appliance as well as to the related
dangers. Children should not play or
tamper with the appliance. Cleaning
and user maintenance should never be
performed by children unless supervised
by a responsible adult.
• Never place the product on a carpet-
covered floor; otherwise, lack of airflow
beneath the machine will cause electrical
parts to overheat. This will cause
problems with your product.
• Do not operate the product if the power
cable / plug is damaged. Call the
Authorized Service Agent.
• Have a qualified electrician connect
a 16-Ampere fuse to the installation
location of the product.
• If the product has a failure, it should not
be operated unless it is repaired by the
Authorized Service Agent. There is the
risk of electric shock!
• This product is designed to resume
operating in the event of powering on
after a power interruption. If you wish to
cancel the programme, see "Cancelling
the programme" section.
• Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Do not neglect to
have the grounding installation made by
a qualified electrician. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.
• The water supply and draining hoses
must be securely fastened and remain
undamaged. Otherwise, there is the risk
of water leakage.
• Never open the loading door or remove
the filter while there is still water in the
drum. Otherwise, risk of flooding and
injury from hot water will occur.
• Do not force open the locked loading
door. The loading door will be ready
to open just a few minutes after the
washing cycle comes to an end. In case
of forcing the loading door to open, the
door and the lock mechanism may get
damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or
pouring water onto it! There is the risk of
electric shock!
• Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Use detergents, softeners and
supplements suitable for washing
machines only.
• Follow the instructions on the textile tags
and on the detergent package.
• The product must be unplugged during
installation, maintenance, cleaning and
repairing procedures.
• Always have the installation and repairing
procedures carried out by the Authorized
Service Agent. Manufacturer shall not
be held liable for damages that may
arise from procedures carried out by
unauthorized persons.
Intended use
• This product has been designed for
domestic use. It is not suitable for
commercial use and it must not be used
out of its intended use.
• The product must only be used for
washing and rinsing of laundry that are
marked accordingly.
• The manufacturer waives any
responsibility arisen from incorrect usage
or transportation.
Children's safety
• Electrical products are dangerous for the
children. Keep children away from the
product when it is in use. Do not let them
to tamper with the product. Use child
lock to prevent children from intervening
with the product.
• Do not forget to close the loading
door when leaving the room where the
product is located.
• Store all detergents and additives in a
safe place away from the reach of the
children.

7EN
3 Installation
Refer to the nearest Authorised Service
Agent for installation of the product. To
make the product ready for use, review the
information in the user manual and make
sure that the electricity, tap water supply
and water drainage systems are appropriate
before calling the Authorized Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
CPreparation of the location and electrical,
tap water and waste water installations
at the place of installation is under
customer's responsibility.
BInstallation and electrical connections of
the product must be carried out by the
Authorized Service Agent. Manufacturer
shall not be held liable for damages that
may arise from procedures carried out by
unauthorized persons.
APrior to installation, visually check if the
product has any defects on it. If so, do
not have it installed. Damaged products
cause risks for your safety.
CMake sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or crushed
while pushing the product into its place
after installation or cleaning procedures.
Appropriate installation location
• Place the machine on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
• Total weight of the washing machine
and the dryer -with full load- when they
are placed on top of each other reaches
to approx. 180 kilograms. Place the
product on a solid and flat floor that has
sufficient load carrying capacity!
• Do not place the product on the power
cable.
• Do not install the product at places
where temperature may fall below 0ºC.
• Place the product at least 1 cm away
from the edges of other furniture.
Removing packaging
reinforcement
Tilt the machine backwards to remove
the packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
Removing the
transportation locks
ADo not remove the transportation
locks before taking out the packaging
reinforcement.
A Remove the transportation safety bolts
before operating the washing machine,
otherwise, the product will be damaged.
1. Loosen all the bolts with a spanner until
they rotate freely (C).
2. Remove transportation safety bolts by
turning them gently.
3. Attach the plastic covers supplied in the
User Manual bag into the holes on the
rear panel. (P)

8EN
C Keep the transportation safety bolts in
a safe place to reuse when the washing
machine needs to be moved again in the
future.
CNever move the product without the
transportation safety bolts properly fixed
in place!
Connecting water supply
CThe water supply pressure required to
run the product is between 1 to 10 bars
(0.1 – 10 MPa). It is necessary to have
10 – 80 liters of water flowing from the
fully open tap in one minute to have your
machine run smoothly. Attach a pressure
reducing valve if water pressure is higher.
CIf you are going to use the double water-
inlet product as a single (cold) water-
inlet unit, you must install the supplied
stopper to the hot water valve before
operating the product. (Applies for the
products supplied with a blind stopper
group.)
CIf you want to use both water inlets of
the product, connect the hot water hose
after removing the stopper and gasket
group from the hot water valve. (Applies
for the products supplied with a blind
stopper group.)
AModels with a single water inlet should
not be connected to the hot water
tap. In such a case the laundry will get
damaged or the product will switch to
protection mode and will not operate.
ADo not use old or used water inlet hoses
on the new product. It may cause stains
on your laundry.
1. Connect the special hoses supplied with
the product to the water inlets on the
product. Red hose (left) (max. 90 ºC) is
for hot water inlet, blue hose (right) (max.
25 ºC) is for cold water inlet.
AEnsure that the cold and hot water
connections are made correctly when
installing the product. Otherwise, your
laundry will come out hot at the end of
the washing process and wear out.
2. Tighten all hose nuts by hand. Never use
a wrench when tightening the nuts.
3. Open the taps completely after making
the hose connection to check for water
leaks at the connection points. If any
leaks occur, turn off the tap and remove
the nut. Retighten the nut carefully after
checking the seal. To prevent water
leakages and damages caused by them,
keep the taps closed when the machine
is not in use.
Connecting to the drain
• The end of the drain hose must be
directly connected to the wastewater
drain or to the washbasin.
AYour house will be flooded if the
hose comes out of its housing during
water discharge. Moreover, there is
risk of scalding due to high washing
temperatures! To prevent such situations
and to ensure smooth water intake and
discharge of the machine, fix the end
of the discharge hose tightly so that it
cannot come out.
• The hose should be attached to a height
of at least 40 cm, and 100 cm at most.
• In case the hose is elevated after
laying it on the floor level or close to
the ground (less than 40 cm above the
ground), water discharge becomes more
difficult and the laundry may come out

9EN
excessively wet. Therefore, follow the
heights described in the figure.
• To prevent flowing of dirty water back
into the machine and to allow for easy
discharge, do not immerse the hose end
into the dirty water or drive it in the drain
more than 15 cm. If it is too long, cut it
short.
• The end of the hose should not be bent,
it should not be stepped on and the hose
must not be pinched between the drain
and the machine.
• If the length of the hose is too short, use
it by adding an original extension hose.
Length of the hose may not be longer
than 3.2 m. To avoid water leak failures,
the connection between the extension
hose and the drain hose of the product
must be fitted well with an appropriate
clamp as not to come off and leak.
Adjusting the feet
AIn order to ensure that the product
operates more silent and vibration-free,
it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet. Otherwise, the product may
move from its place and cause crushing
and vibration problems.
1. Loosen the lock nuts on the feet by
hand.
2. Adjust the feet until the product stands
level and balanced.
3. Tighten all lock nuts again by hand.
ADo not use any tools to loosen the lock
nuts. Otherwise, they will get damaged.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications" table.
Our company shall not be liable for any
damages that will arise when the product is
used without grounding in accordance with
the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or breaker
protection are specified in the “Technical
specifications” section. If the current
value of the fuse or breaker in the house
is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The specified voltage must be equal to
your mains voltage.

10 EN
• Do not make connections via extension
cables or multi-plugs.
BDamaged power cables must be
replaced by the Authorized Service
Agents.
First use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections "Important
safety instructions" and "Installation".
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If your machine is not featured
with Drum Cleaning programme, use
Cottons-90 programme and select Additional
Water or Extra Rinse auxiliary functions as
well. Before starting the programme, put
max. 100 g of powder anti-limescale into
the main wash detergent compartment
(compartment nr. II). If the anti-limescale
is in tablet form, put only one tablet into
compartment nr. II. Dry the inside of the
bellow with a clean piece of cloth after the
programme has come to an end.
CUse an anti-limescale suitable for the
washing machines.
CSome water might have remained in
the product due to the quality control
processes in the production. It is not
harmful for the product.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in a safe
place away from reach of the children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort in
accordance with recycled waste instructions.
Do not dispose of them with normal
domestic waste.
Transportation of the product
1. Unplug the product before transporting
it.
2. Remove water drain and water supply
connections.
3. Drain the remaining water in the product
completely; see, "Draining remaining
water and cleaning the pump filter".
4. Install transportation safety bolts in the
reverse order of removal procedure; see,
"Removing the transportation locks".
CNever move the product without the
transportation safety bolts properly fixed
in place!
Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how to
dispose of your product.
For children's safety, cut the power cable and
break the locking mechanism of the loading
door so that it will be nonfunctional before
disposing of the product.

11 EN
4 Preparation
Things to be done for
energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
• Operate the product in the highest
capacity allowed by the programme you
have selected, but do not overload; see,
"Programme and consumption table".
• Always follow the instructions on the
detergent packaging.
• Wash slightly soiled laundry at low
temperatures.
• Use faster programmes for small
quantities of lightly soiled laundry.
• Do not use prewash and high
temperatures for laundry that is not
heavily soiled or stained.
• If you plan to dry your laundry in a
dryer, select the highest spin speed
recommended during washing process.
• Do not use detergent in excess of the
amount recommended on the detergent
package.
Sorting the laundry
• Sort laundry according to type of
fabric, colour, and degree of soiling and
allowable water temperature.
• Always obey the instructions given on the
garment tags.
Washing water
temperature
Bleach can be
used
Suitable for drier
Wash with sensitive,
.short programmes
Do not use bleach
Do not dry with drier
Hang without
spinning
Can be ironed with
hot iron
Non machine-washable Do not wash
Dry-cleanable Do not dry-clean
Dry horizontally Dry on a hanger
Can be ironed
with warm iron
Do not iron
Preparing laundry for washing
• Laundry items with metal attachments
such as, underwired bras, belt buckles or
metal buttons will damage the machine.
Remove the metal pieces or wash the
clothes by putting them in a laundry bag
or pillow case.

12 EN
• Take out all substances in the pockets
such as coins, pens and paper clips, and
turn pockets inside out and brush. Such
objects may damage the product or
cause noise problem.
• Put small size clothes such as infant's
socks and nylon stockings in a laundry
bag or pillow case.
• Place curtains in without compressing
them. Remove curtain attachment items.
• Fasten zippers, sew loose buttons and
mend rips and tears.
• Wash “machine washable” or “hand
washable” labeled products only with an
appropriate programme.
• Do not wash colours and whites
together. New, dark coloured cottons
release a lot of dye. Wash them
separately.
• Tough stains must be treated properly
before washing. If unsure, check with a
dry cleaner.
• Use only dyes/colour changers and
limescale removers suitable for machine
wash. Always follow the instructions on
the package.
• Wash trousers and delicate laundry
turned inside out.
• Keep laundry items made of Angora
wool in the freezer for a few hours before
washing. This will reduce pilling.
• Laundry that are subjected to materials
such as flour, lime dust, milk powder,
etc. intensely must be shaken off before
placing into the machine. Such dusts
and powders on the laundry may build
up on the inner parts of the machine in
time and can cause damage.
Correct load capacity
The maximum load capacity depends on the
type of laundry, the degree of soiling and the
washing programme desired.
The machine automatically adjusts the
amount of water according to the weight of
the loaded laundry.
AFollow the information in the
“Programme and consumption table”.
When overloaded, machine's washing
performance will drop. Moreover, noise
and vibration problems may occur.
Laundry types and their average weights in
the following table are given as examples.
Laundry type Weight (g)
Bathrobe 1200
Napkin 100
Duvet cover 700
Bed Sheet 500
Pillowcase 200
Tablecloth 250
Towel 200
Hand towel 100
Evening gown 200
Underclothing 100
Men’s overalls 600
Men’s shirt 200
Men’s pajamas 500
Blouses 100
Loading the laundry
• Open the loading door.
• Place laundry items loosely into the
machine.
• Push the loading door to close until you
hear a locking sound. Ensure that no
items are caught in the door.
CThe loading door is locked while a
programme is running. The door can only
be opened a while after the programme
comes to an end.
AIn case of misplacing the laundry, noise
and vibration problems may occur in the
machine.
Using detergent and softener
Detergent Drawer
The detergent drawer is composed of three
compartments:
- (I) for prewash
- (II) for main wash
– (III) for softener
– (*) in addition, there is siphon piece in the
softener compartment.
1
231
23

13 EN
C
The detergent dispenser may be in two
different types according to the model of
your machine as seen above.
Detergent, softener and other cleaning
agents
• Add detergent and softener before
starting the washing programme.
• Never open the detergent drawer while
the washing programme is running!
• When using a programme without
prewash, do not put any detergent into
the prewash compartment (compartment
nr. I).
• In a programme with prewash, do not
put liquid detergent into the prewash
compartment (compartment nr. I).
• Do not select a programme with
prewash if you are using a detergent bag
or dispensing ball. Place the detergent
bag or the dispensing ball directly among
the laundry in the machine.
• If you are using liquid detergent, do
not forget to place the liquid detergent
cup into the main wash compartment
(compartment nr. II).
Choosing the detergent type
The type of detergent to be used depends on
the type and colour of the fabric.
• Use different detergents for coloured and
white laundry.
• Wash your delicate clothes only with
special detergents (liquid detergent, wool
shampoo, etc.) used solely for delicate
clothes.
• When washing dark coloured clothes
and quilts, it is recommended to use
liquid detergent.
• Wash woolens with special detergent
made specifically for woolens.
AUse only detergents manufactured
specifically for washing machines.
ADo not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be
used depends on the amount of laundry,
the degree of soiling and water hardness.
Read the manufacturer's instructions on the
detergent package carefully and follow the
dosage values.
• Do not use amounts exceeding the
dosage quantities recommended on the
detergent package to avoid problems of
excessive foam, poor rinsing, financial
savings and finally, environmental
protection.
• Use lesser detergent for small amounts
or lightly soiled clothes.
• Use concentrated detergents in the
recommended dosage.
Using softeners
Pour the softener into the softener
compartment of the detergent drawer.
• Use the dosages recommended on the
package.
• Do not exceed the (>max<) level marking
in the softener compartment.
• If the softener has lost its fluidity, dilute
it with water before putting it in the
detergent drawer.
Using liquid detergents
If the product contains a liquid detergent
cup:
• Make sure that you have placed the
liquid detergent cup in compartment nr.
"II".
• Use the detergent manufacturer's
measuring cup and follow the
instructions on the package.
• Use the dosages recommended on the
package.
• If the liquid detergent has lost its fluidity,
dilute it with water before putting in the
detergent cup.
If the product does not contain a liquid
detergent cup:
• Do not use liquid detergent for the
prewash in a programme with prewash.
• Use the detergent manufacturer's
measuring cup and follow the
instructions on the package.
• Liquid detergent stains your clothes
when used with Delayed Start function.
If you are going to use the Delayed Start
function, do not use liquid detergent.
Using gel and tablet detergent
When using tablet, gel, etc. detergents,
read the manufacturer's instructions on the
detergent package carefully and follow the

14 EN
dosage values. If there is not any instruction
on the package, apply the following.
• If the gel detergent thickness is fluidal
and your machine does not contain a
special liquid detergent cup, put the gel
detergent into the main wash detergent
compartment during first water intake. If
your machine contains a liquid detergent
cup, fill the detergent into this cup before
starting the programme.
• If the gel detergent thickness is not
fluidal or in the shape of capsule liquid
tablet, put it directly into the drum before
washing.
• Put tablet detergents into the main wash
compartment (compartment nr. II) or
directly into the drum before washing.
CTablet detergents may leave residues
in the detergent compartment. If you
encounter such a case, place the tablet
detergent between the laundry, close
to the lower part of the drum in future
washings.
CUse the tablet or gel detergent without
selecting the prewash function.
Using starch
• Add liquid starch, powder starch or the
dyestuff into the softener compartment
as instructed on the package.
• Do not use softener and starch together
in a washing cycle.
• Wipe the inside of the machine with a
damp and clean cloth after using starch.
Using bleaches
• Select a programme with prewash
and add the bleaching agent at the
beginning of the prewash. Do not put
detergent in the prewash compartment.
As an alternative application, select a
programme with extra rinse and add
the bleaching agent while the machine
is taking water from the detergent
compartment during first rinsing step.
• Do not use bleaching agent and
detergent by mixing them.
• Use just a little amount (approx. 50 ml)
of bleaching agent and rinse the clothes
very well as it causes skin irritation. Do
not pour the bleaching agent onto the
clothes and do not use it for coloured
clothes.
• When using oxygen based bleaches,
follow the instructions on the package
and select a programme that washes at
a lower temperature.
• Oxygen based bleaches can be used
together with detergents; however, if
its thickness is not the same with the
detergent, put the detergent first into
the compartment nr. "II" in the detergent
drawer and wait until the detergent flows
while the machine is taking in water.
Add the bleaching agent from the same
compartment while the machine is still
taking in water.
Using limescale remover
• When required, use limescale removers
manufactured specifically for washing
machines only.
• Always follow instructions on the
package.

15 EN
5 Operating the product
Control panel
1 - Spin Speed Adjustment button
2 - Display
3 - Temperature Adjustment button
4 - Programme Selection knob
5 - On / Off button
6 - Delayed Start buttons (+ / -)
7 - Auxiliary Function buttons
8 - Start / Pause / Cancel button
Display symbols
F1 F2 F3 F4
a - Spin Speed indicator
b - Temperature indicator
c - Spin symbol
d - Temperature symbol
e - Remaining Time and Delayed Start
indicator
f - Programme Indicator symbols
(Prewash / Main Wash / Rinse /
Softener / Spin)
g - Economy symbol
h - Delayed Start symbol
i - Door Locked symbol
j - Start symbol
k - Pause symbol
l - Auxiliary Function symbols
m - No Water symbol
Preparing the machine
1. Make sure that the hoses are connected
tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
Programme selection
1. Select the programme suitable for
the type, quantity and soiling degree
of the laundry in accordance with the
"Programme and consumption table"
and the temperature table below.
1
6 7 8
2 3 4 5

16 EN
90˚C
Heavily soiled white cottons
and linens. (coffee table covers,
tableclothes, towels, bed sheets,
etc.)
60˚C
Normally soiled, coloured, fade
proof cottons or synthetic clothes
(shirt, nightgown, pajamas, etc.)
and lightly soiled white linens
(underwear, etc.)
40˚C-
30˚C-
Cold
Blended laundry including
delicate textile (veil curtains, etc.),
synthetics and woolens.
2. Select the desired programme with the
Programme Selection button.
CProgrammes are limited with the highest
spin speed appropriate for that particular
type of fabric.
CWhen selecting a programme, always
consider the type of fabric, colour,
degree of soiling and permissible water
temperature.
C Always select the lowest required
temperature. Higher temperature means
higher power consumption.
CFor further programme details, see
"Programme and consumption table".
Main programmes
Depending on the type of fabric, use the
following main programmes.
• Pamuklu (Cottons)
Use this programme for your cotton laundry
(such as bed sheets, duvet and pillowcase
sets, towels, bathrobes, underwear, etc.). Your
laundry will be washed with vigorous washing
action for a longer washing cycle.
• Sentetik (Synthetics)
Use this programme to wash your synthetic
clothes (shirts, blouses, synthetic/cotton
blends, etc.). It washes with a gentle action and
has a shorter washing cycle compared to the
Cottons programme.
For curtains and tulle, use the Synthetic 40˚C
programme with prewash and anti-creasing
functions selected. As their meshed texture
causes excessive foaming, wash the veils/tulle
by putting little amount of detergent into the
main wash compartment. Do not put detergent
in the prewash compartment.
• Yünlü (Woollens)
Use this programme to wash your woolen
clothes. Select the appropriate temperature
complying with the tags of your clothes. Use
appropriate detergents for woolens.
Additional programmes
For special cases, additional programmes are
available in the machine.
C Additional programmes may differ
according to the model of the machine.
• Pamuklu Eko (Cotton Economic)
You may wash your normally soiled durable
cotton and linen laundry in this programme
with the highest energy and water saving
compared to all other wash programmes
suitable for cottons. Actual water
temperature may differ from the declared
cycle temperature. Programme duration
may automatically be shortened during later
stages of the programme if you wash less
amount (e.g. ½ capacity or less) of laundry.
In this case energy and water consumption
will be further decreased giving you the
opportunity for a more economical wash.
This feature is available for certain models
having remaining time display.
• Hijyen (Hygiene)
Use this programme to wash baby laundry,
and the laundry that belongs to allergic
persons. Longer heating time and an
additional rinsing step provide a higher level
of hygiene.
• Elde Yıkama (Hand wash)
Use this programme to wash your woolen/
delicate clothes that bear “not machine-
washable” tags and for which hand wash
is recommended. It washes laundry with a
very gentle washing action to not to damage
clothes.
• Hızlı+Günlük (Daily+Quick)
Use this programme to wash your lightly
soiled cotton clothes in a short time.
• Hızlı 14 (Quick 14)
Use this programme to wash your little
amount of lightly soiled cotton clothes in a
short time.
• Gömlek (Shirts)
Use this programme to wash the shirts made
of cotton, synthetic and synthetic blended
fabrics together.
• Perde (Curtain)
Use this programme to wash your tulles and
curtains. Thanks to the special spin profile of
the programme, tulles and curtains crease
lesser.
As their meshed texture causes excessive
foaming, wash the veils/tulle by putting little
amount of detergent into the main wash
compartment. Do not put detergent in the
prewash compartment. Prewash is used to
clean the dirt (dust, sooth, etc.) on the tulles /
curtains that can be removed easily.

17 EN
CIt is suggested to use recommended
detergents for curtains in this
programme.
• Yorgan (Duvet (Bedding))
Use this programme to wash your fiber
duvets that bear “machine washable” tag.
Make sure that you have loaded the duvet
correctly in order not to damage the machine
and the duvet. Remove the duvet cover
before loading the duvet into the machine.
Fold the duvet into two and load it into the
machine. Load the duvet into the machine
paying attention to place it in a way that it will
not contact the bellow.
CDo not load more than 1 double fibre
duvet (200 x 200 cm).
CDo not wash your duvets, pillows and
etc. that contain cotton in the machine.
ADo not wash the items apart from duvets
such as carpets, rugs and etc. in the
machine. Permanent damage occurs in
the machine.
• Refresh (Freshen Up)
Use this programme to remove the odour on
the laundry that are worn only for once and
do not contain any stains or dirt.
• Pamuklu 20 (Eco Clean)
Use this programme, which is much
more sensitive to environment and natural
resources, to wash your lightly soiled and
unstained cotton laundry (max. 3.5 kg) in a
short time and economically.
CIt is recommended to use liquid
detergent or gel washing detergent.
• Kazan Temizleme (Self Clean)
Use this programme regularly (once in every
1-2 months) to clean the drum and provide
the required hygiene. Run the programme
without any laundry in the machine. To obtain
better results, put powder limescale remover
for washing machines into the detergent
compartment II. When the programme is
over, leave the loading door ajar so that the
inside of the machine gets dry.
CThis is not a washing programme. It is a
maintenance programme.
CDo not run the programme when there
is something in the machine. If you try to
do so, the machine detects that there is
a load inside and aborts the programme.
Special programmes
For specific applications, select any of the
following programmes.
• Durulama (Rinse)
Use this programme when you want to rinse
or starch separately.
• Sıkma+Pompa (Spin + Drain)
Use this programme to apply an additional
spin cycle for your laundry or to drain the
water in the machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause
/ Cancel button. The machine will spin the
laundry with the set spin speed and drain the
water coming out of them.
If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin
function with the help of Spin Speed
Adjustment button. Press Start / Pause /
Cancel button.
CUse a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature
indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
decreases with increments of 10° and finally,
“-” symbol indicating the cold wash option
appears on the display.
C
If you scroll to cold wash option and
press Temperature Adjustment button
again, the recommended temperature
for the selected programme appears
on the display. Press the Temperature
Adjustment button again to decrease the
temperature.

18 EN
Economy symbol
Indicates the programmes and temperatures
that provide energy savings.
C
Economy symbol can not be selected in
Intensive and Hygiene programmes since
washing is performed in long times and
at high temperatures in order to provide
hygiene. Similarly, Economy symbol can
not be selected in Baby, Refresh, Drum
Cleaning, Spin and Rinse programmes
as well.
Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually. Then, depending on
the model of the product, "Rinse Hold" and
"No Spin" options appear on the display.
See "Auxiliary function selection" section for
explanations of these options.
C
Rinse Hold option is indicated with “
” symbol and No Spin option is indicated
with “ ” symbol.
F2 F4
F1 F3

19 EN
Programme and consumption table
• : Selectable
* : Automatically selected, no cancelling.
** : Energy Label programme (EN 60456 Ed.3)
*** If maximum spin speed of the machine is lower then this value, you can only select up to
the maximum spin speed.
- : See the programme description for maximum load.
C The auxiliary functions in the table may vary according to the model of your machine.
C Water and power consumption may vary subject to the changes in water pressure, water
hardness and temperature, ambient temperature, type and amount of laundry, selection of
auxiliary functions and spin speed, and changes in electric voltage.
CYou can see the washing time of the programme you have selected on the display of the
machine. It is normal that small differences may occur between the time shown on the
display and the real washing time.
EN 2Auxiliary functions
Programme (°C)
Max. Load (kg) Water Consumption (l) Energy Consumption (kWh) Max. Speed*** Ön Yıkama Hızlı Yıkama Rinse Plus Kırışık Azaltma İlave Su Rinse Hold Pet hair removal
Selectable
temperature
range °C
Pamuklu 90 9 87 2.70 1600 ••••••• 90-Cold
Pamuklu 60 9 85 1.80 1600 ••••••• 90-Cold
Pamuklu 40 9 85 1.00 1600 ••••••• 90-Cold
Hijyen 90 9 80 2.70 1600 * •90-30
Pamuklu Eko 60** 9 55 1.08 1600 •60-Cold
Pamuklu Eko 60** 4.5 46 0.92 1600 •60-Cold
Pamuklu Eko 40** 4.5 46 0.76 1600 •60-Cold
Pamuklu Eko 40 9 80 0.95 1600 •60-Cold
Sentetik 60 4 55 1.00 1200 ••••••• 60-Cold
Sentetik 40 4 55 0.52 1200 ••••••• 60-Cold
Pamuklu 20 20 3.5 45 0.16 1600 •20
Perde 40 2 67 0.50 800 * * * •40-Cold
Yorgan 40 - 60 0.60 1200 60-40
Hızlı 14 30 2 40 0.10 1400 • • 30-Cold
Hızlı&Günlük 90 9 70 2.02 1400 • • 90-Cold
Hızlı&Günlük 60 9 70 1.20 1400 • • 90-Cold
Hızlı&Günlük 30 9 80 0.30 1400 • • 90-Cold
Yünlü 40 2 56 0.30 1200 • • • 40-Cold
Elde Yıkama 30 1.5 40 0.25 1200 30-Cold
Gömlek 40 4 45 0.60 800 • • • *•60-Cold
Kazan Temizleme 70 - 110 2.00 800 * 70
Refresh - 2 35 0.03 1200 •-
** “Cotton Economic 40°C and Cotton Economic 60°C are the standard programmes.” These
programmes are referred to as ‘standard 40°C cotton programme’ and ‘standard 60°C
cotton programme’

20 EN
Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you
may also select or cancel auxiliary functions
that are suitable to the running programme
by pressing the Start / Pause / Cancel button
when the machine is operating. For this,
the machine must be in a step before the
auxiliary function you are going to select or
cancel.
Depending on the programme, press a, b,
c or d buttons to select the desired auxiliary
function. Symbol of the selected auxiliary
function appears on the display.
a b c d
CSome functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the function
selected first will be canceled and the
second auxiliary function selection will
remain active. For example, if you want
to select Quick Wash after you have
selected the Prewash, Prewash will be
canceled and Quick Wash will remain
active.
C An auxiliary function that is not
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
C Auxiliary Function buttons may vary
according to the model of the machine.
• Ön Yıkama (Prewash)
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
F1 appears on the display when you select
this function (a).
• Hızlı Yıkama (Quick Wash)
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of rinsing
steps for lightly soiled laundry.
F2 appears on the display when you select
this function (b).
CWhen you select this function, load
your machine with half of the maximum
laundry specified in the programme table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk
for sensitive skins (babies, allergic skins,
etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
F3 appears on the display when you select
this function (c).
• İlave Su (Plus water)
This function enables you to wash and
rinse your laundry with plenty of water in
Cottons, Synthetics, Delicates, and Woolens
programmes. Use this function for delicate
laundry that creases easily.
F3 appears on the display when you select
this function (c).
CWhen you select this function, load
your machine with half of the maximum
laundry specified in the programme table.
• Kırışık Azaltma (Anti-Creasing)
This function creases the clothes lesser when
they are being washed. Drum movement
is reduced and spinning speed is limited to
prevent creasing. In addition, washing is done
with a higher water level.
F4 appears on the display when you select
this function (d).
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes,
you may use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start
/ Pause /Cancel button after this process if
you want to drain the water without spinning
your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start /
Pause / Cancel button.
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.
• Soaking
The Soaking auxiliary function ensures better
removal of stains ingrained into the clothes by
holding them in the detergent water prior to
startup of the programme.