7
Turn wind knob until it stops,
pressshutter release,and again
turn wind knob until it stops.
These two winds take up film
leader and advance fresh film
into position. Winding film
also cocks the shutter, pr€-
venting double exposure. Since
shutter will be cocked each
time film is wound, be careful
not to press shutter release
before you are ready to take
your first picture.
The exposure counter dial
must be set each time you re-
load. After fresh fiIm has been
advapced into position, press
counter dial down and turn to
20 (for a 2O
exposure roll) or to
0 (for a 36 exposureroll). The
dial makes a complete revolu-
tion each time you wind the
film, and automatically stops
at the mark indicating the
number of exposures remain-
ing on the film.
unloading
When end of fi.Im ls reached,
film must berewoundbackinto
film cartridge. Pull wind knob
completely up and rotate it 1Z
turn backwards. Using rewind
knob,rewind film until counter
dial hasstopped rotating. Con-
tinue to turn knob a few extra
revolutions to be sure film is
entirely in cartridge. Open
back, remove film cartridge,
and have film developed as
soon as possible.
