Aruba Networks AP-635-CVR-20 User manual

AP-635-CVR-20
Installation Guide
0512234-01 | July 2021 1
Package Contents
Plastic access point covers (20)
AP-635-CVR-20 Installation Guide
Introduction
The AP-635-CVR-20 cover clips onto the exterior of the access point, offering a practical and aesthetic
solution for concealment and customization.
Installing the AP-635-CVR-20
1. Align the holes on the cover with the LEDs on the access point (see Figure 1).
Figure 1 Aligning cover with LEDs
2. Press the cover onto the access point (see Figure 2, step 1), making sure the cover clips are
clipped into the first and fourth chassis slot near the Ethernet port (see Figure 3).

2AP-635-CVR-20 | Installation Guide
Figure 2 Pressing cover onto access point
Figure 3 Securing cover clips into chassis slots
3. Press the top side of the cover (see Figure 2, step 2) until it snaps on the access point (see Figure
4).
Figure 4 Securing cover onto access point (completed)
1
2
1