Asahi Net Speed Wi-Fi NEXT WX02 User manual

Speed Wi-Fi NEXT
!!
1 2
Getting Ready
Remove ①and ②from the packaging. Have your own device to hand.
①WX02 unit ③Your own device
（ Wi-Fi Capable）
②au Micro IC card
※Computer, tablet, smartphone, etc.
WX02
Stepstomakingsettings
Setup Guide
3 4
11
Prepare the WX02
Make Wi-Fi Connection to the WX02
22
From the Start screen,
select Desktop, and then click the
network icon (task tray).
The Desktop shown on the Start screen.
A-1
In the Networks list, find a name
(SSID) starting WX02- then click
Connect.
A-2
Refer to the right-hand How To
Confirm The Network Key
chart and then, at the Enter the
network security key prompt,
enter the network key. Click Next.
A-3
When asked Do you want to turn on
sharing between PCs and connect to
devices on this network? Select Yes,
turn on sharing and connect to devices.
If the status of the WX02-xxxxxxxxx
connection in the Networks list is
Limited
then settings to this point are complete.
A-4
If using a tablet or smartphone, see the reverse of this sheet.
PC
（Windows 8）
Wi-Fi connection method
A
Switch to English Display
Please continue to the reverse side for
33
①
②
Network icon.
WX02
WX02
WX02
WX02
How To Confirm The Network Key
1.Remove the IC card from the card holder.
2.Insert the IC card into the WX02.
As shown in the diagram,
remove the au Micro IC card from the card holder.
3.Charge the WX02, and then turn it on.
Make Wi-Fi connection to the WX02
Continue to
22
Prepare the WX02 Switch to English
Display
Make
Wi-Fi connection
to the WX02
Make connection
settings
Press the SELECT
button repeatedly
until the 無線LAN
情報(Wi-Fi) Info
screen is shown.
Gently press the
WX02
s POWER
button to see the
top screen.
Press the SET
button to display
the Primary SSID.
Press the
SELECT button to
display the
Primary Key.
1 3
2
The text
displayed is the
Primary Key.
4
Notch
SIM card sl ot
Ter mi na l
area
Terminal area
Charge up the WX02, then hold down its
power button for up to 5seconds until it turns on.
Insert the au Micro IC Card with its metal side down
into the IC Card slot until it clicks into position.
Slide the battery pack with the recycling
mark face up into the WX02.
Press the rear cover of the WX02
back on until it clicks into position.
①Select
WX02-xxxxxxxxx.
②Click Connect.

Make Wi-Fi Connection to the WX02
22
Tablet or smartphone (Android)
Wi-Fi connection method
B
In the Settings menu, under WIRELESS &
NETWORKS, make sure Wi-Fi is ON.
B-1
Select the network name starting WX02-.
B-2
iPhone / iPad (iOS)
Wi-Fi connection method
C
Select the Settings icon, and then tap Wi-Fi.
Turn Wi-Fi ON, and then select the network name
starting WX02-.
C-1
Refer to A-3How To Confirm The Network Key on
the reverse side and enter the Network Key in the
Password field, then tap Connect.
C-2
Refer to A-3How To Confirm The Network Key
on the reverse side and enter the Network Key in the
Password field, then tap Connect.
Refer to A-3How To
Confirm The Network
Key on the reverse side for
the Network Key
(password).
Refer to A-3How To Confirm The Network Key on
the reverse side for the Network Key (password).
B-3
If the status is
Connected
then settings
are complete.
B-4
If using a PC, please see the reverse of this sheet.
If the WX02-xxxxxxxxx connection has a checkmark
beside it then settings are complete.
C-3
Switch to English Display
Please continue to
33
wx02
wx02
WX02
wx02
WX02
wx02
Switch to English Display
33
Make connection settings
44
1. Open a Web browser on the Wi-Fi device (e.g. smartphone) connected to the WX02.
2. Type http://192.168.179.1in the address bar of the Web browser and open the page.
3. Tap/Click on the English button.
4. Type in a password of your choice in the パスワード (Password) and パ スワード 再入 力 (Re enter) fields. Type the
same password in both fields. This will be your administrator password for the WX02 device so please make a
note of it so that you don
t forget it.Tap/Click the 設定(Apply) botton.
5. Tap/Click on the English button.
6. You will be prompted to enter a login Name/User Name and Password. Enter as follows:
Name/User Name : admin
Password : The password you created in step 4above.
7. Tap/Click the Sign in button. This will change the WX02
s display to English.
Step1
Step2
Step3
Step4
Step5
The settings are now complete
Gently press the WX02 s
POWER button to see the top
screen.
Press the SELECT button
repeatedly until the Functions
Maintenance screen is shown.
Press the SET button. Remote
Start will appear.
Press the SELECT button.
APN is displayed.
Press the SET button.
Press the SELECT button.
Internet is displayed. Press the SELECT button again.
Step6
Step7
AN01 * is displayed.
Press the SET button.
Configured will be displayed.
* To use a Fixed IP address,
select AN02.
Should you need assistance, please contact our English support line.
03-6631-0861
0120-577-135
10am to 5pm,
Monday through Friday.
For calls from a NTT landline in Japan