GTLT2 USER MANUAL
Page 9 of 21
name#APN password ##
Remarks: (1)If no APN username and password are required, just input APN only.
(2)Use format 2 if your APN requires APN user name and APN password.
(3) APN is gateway to connect internet, Each country is different, please contact your SIM card provider forAPN name.
Set IPand Port (Default:0.0.0.0,0000) #804#****#IP#port## #804#0000#58.64.205.22#8886##
Remarks: IP is your server’s IP and Port.
Upload in preset interval when car
moving(ACC ON) (Default:0,0)
#805#****#T#N## #805#0000#30#1##
Remarks:(1) T= Record location by interval, from 10 to 65535 in the unit of second.
(2)N= Upload Record Location Quantity Per Time, from 1-50.
(3)Upload location data interval=T*N
In this example: GTLT2 will send location every 30 seconds, 1 location reports per time when car moving.(ACC ON)
N=0, close upload data by preset interval, the gps tracker will reply ”GPRS Timer Stop”
Upload in preset interval when car
stop(ACC OFF) (Default:0,0)
#809#****#T#N## #809#0000#1800#1##
Remarks:(1) T= Record location by interval, from 10 to 65535 in the unit of second.
(2)N= Upload Record Location Quantity Per Time, from 1-50.
(3)Upload location data interval=T*N
In this example: GTLT2 will send location every half an hour, 1 location reports per time when car stop.(ACC OFF)
N=0, close upload data by preset interval, the gps tracker will reply ”GPRS Timer Stop”
Upload Present Location Immediately #806#**** ## #806#0000##
Remarks :(1) The GPS Tracker will send confirmative sms “Start GPRS Upload” to the first phone number on Authorization
(2)The GPS Tracker will upload present location to server immediately, the status on the data will show ”sms”
Set History Data Record Interval #807#****#X## #807#0000#30##
Note: This command is applicable in tracking by GPRS mode only.
Remarks:(1) X is the location sample interval to record history data
X=0-999,in the unit of seconds
(2)X=0, close history data uploading function
(3) GTLT2 can store 3000 waypoints, each waypoint is 100B(Byte). If more than 3000 waypoints, the new waypoint will override the old
waypoint directly.
(4) If GTLT2 is in power saving mode, and remain still. The history data uploading function will close automatically, until GTLT2 is
activated by incoming sms/phone call.
In this example: The gps tracker will record waypoints every 30 seconds
Upload History Data (Default:0) #808#****#X## #808#0000#24##
Note: This command is applicable in tracking by GPRS mode only.
Remarks:(1) Upload all stored data: #808#****##
(2) Upload 24hours’data: #808#0000#24##
In this example: The gps tracker will upload the stored data to sever
Change GPRS Service User name on
GPRS mode (Default:V500,0000)
#801#****#New GPRS Service User
Name##
#801#0000#newuser##
Remarks: The GPRS Service User name will be changed to newuser
Change GPRS Service Password on
GPRS mode
#802#****#New GPRS Service
Password#Old GPRS Service
Password##
#802#0000#1234#0000##
