ATD Tools ATD-7479 User manual
ATD7479_rev_0719Made in China to ATD Tools, Inc. Specifications
Visit us at www.atdtools.com
ATD-7479
Foldable Engine Stand
Owner’s Manual
Features:
$OO$7'HQJLQHVWDQGVDUHFRQVWUXFWHGIURPKHDY\JDXJH
ZHOGHGVTXDUHWXEXODUVWHHODQGIHDWXUHH[WUDORQJKDQGOHV
ZLWKUXEEHUJULSIRUHDV\URWDWLRQDQGPDQHXYHULQJ
+HDY\GXW\ZRUPJHDUDOORZVIRUVPRRWKDQGHIIRUWOHVVHQJLQHURWDWLRQ
)ROGVIRUHDV\VWRUDJH
Specifications:
&DSDFLW\OEV
2YHUDOO+HLJKW
%DVH6L]H[
:KHHO'LDPHWHU
+HDG3ODWH[
+HDG3ODWH7KLFNQHVV
0HHWVRUH[FHHGV$60(3$6(VWDQGDUGV
All manuals and user guides at all-guides.com
SAFETY and GENERAL INFORMATION
Save these instructions. )RU \RXU safet\, read, understand, and follow the information provided with and on this
HQJLQH stand before XVLQJ The owner DQGRU operator of this equipment should have an XQGHUVWDQGLQJ of HQJLQH
stand use and safe RSHUDWLQJ procedures before DWWHPSWLQJ to use. The owner DQGRU operator should be aware that
the use and repair of this product PD\ require special VNLOOV and NQRZOHGJH Instructions and VDIHW\ information should
EHFRQYH\HG in the operator’s native ODQJXDJH before use of this HQJLQH stand is DXWKRUL]HG If DQ\ doubt exists as to
the safe and proper use of this product, remove from service immediatel\.
Inspect before each use. Do not use if EURNHQ bent, FUDFNHG or GDPDJHG parts LQFOXGLQJ labels) are noted. $Q\
HQJLQH stand that appears GDPDJHG in DQ\ wa\, operates DEQRUPDOO\ or is PLVVLQJ parts, should be removed from
service immediatel\. If \RX suspect that the HQJLQH stand was subjected to a VKRFN load (a load dropped suddenl\,
XQH[SHFWHGO\ upon it), LPPHGLDWHO\ discontinue use until it has been FKHFNHG E\ a IDFWRU\ DXWKRUL]HG service center
(contactdistributorforlistofautKRUL]HG servicecenters).It is recommended that anannualinspectioQEHGRQHE\
qualified personnel. Labels and owner’s manuals are available from the manufacturer.
PRODUCT DESCRIPTION
This (QJLQH Stand is GHVLJQHG to VDIHO\ support a rated FDSDFLW\ HQJLQH GXULQJ the time that the HQJLQH is EHLQJ
rebuilt or repaired.
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
!
SPECIFICATIONS
Model &DSDFLW\ %DVH6L]H
(L[: 2YHUDOO+HLJKW +HDG3ODWH
(L[+[ 7KLFNQHVV
:KHHO
Diameter
A7' OEV ´;´ [[
)LJXUH0RGHO A7'&RPSRQHQWV
+HDG3ODWH
*HDU%R[
8SULJKW
)URQW/HJ
Caster
%DVH
0RXQWLQJ Arm
%UDFH
&UDQN+DQGOH
/RFN3LQ
All manuals and user guides at all-guides.com
ASSEMBLY
Model ATD-7479:
1. $WWDFKWZRFDVWHUV(#29)WROHJV (#35) DQGWZR´ORFNLQJFDVWHUV(#38) WREDVHZLWKEROWVZDVKHUV
(#31 & 30)
.
$WWDFKWZR´FDVWHUV (#32) to base (#28)
(#31, 30 & 33)
.
$WWDFKXSULJKW(#12) to the base (#28)ZLWKEROWVZDVKHUVQXW(#37, 27 & 9)+DQGWLJKWHQRQO\.
4. Attach braces (#25) to XSULJKW(#12) with one bolt, washer nut
(#10, 27 & 9)
. Attach the other end to the inside of base
(#28)ZLWKWZREROWVZDVKHUVQXWV
(#26, 27 & 9)
. TLJKWHQDOOQXWV
$WWDFKWZROHJV(#35) to base (#28)ZLWKWZREROWVZDVKHUVQXWV
(#10, 27 & 9)
. Insert bolts from outer part of base.
$OLJQKROHVRQOHJV(#35) and base (#28)WKHQVOLGHLQORFNSLQV(#34) and secure with cotter pins (#36).
7.
$WWDFKIRXUPRXQWLQJDUPV(#5) to the head plate (#6) ZLWKEROWVIODWZDVKHUVORFNZDVKHUVQXWV(#4, 3, 2 & 1)
.
Insert handle (#22)WRWKHJHDUER[RQXSULJKW (#12) and secure with bolt (#14) ZDVKHU
(#15)
.
Note:&KHFNDOOIDVWHQHUVIRUWLJKWQHVVWLJKWHQZKHUHUHTXLUHG
Size of Hardware Kits Qty
9 Nut 0 7
10 %ROW 0[
14 %ROW 0[ 1
%ROW 0[
/RFN:asher 0 7
/RFN:asher 0
%ROW 0[
)ODW:asher 0
%ROW 0[
TRIROGIRUVWRUDJH
a. Remove cotter pin (#36) and ORFN pin
(#34) IURPERWKOHJV(#35).
b. &DUHIXOO\ and VORZO\ fold OHJ(#35) up.
c. Slide ORFN pins (#34) into the front
holes of the base (A) and secure with
cotter pins (#36).
A
A
)LJXUH $VVHPEO\,OOXVWUDWLRQIRU0RGHO A7'
All manuals and user guides at all-guides.com
4
BEFORE USE
1. %HIRUH XVLQJ this product, read the owner’s manual
cRPSOHWHO\ and familiari]e \ourself WKRURXJKO\ with the
product and the KD]DUGV associated with its improper use.
VHULI\ that the product and the application are compatible.
Inspect HQJLQH stand before each use. Do not use if there
arebent, broNen or craFNedcomponents LQFOXGLQJ labels).
4. (nsurethat casterswheels andadapterplate rotate freel\.
&KHFNIRUDQGWLJKWHQDQ\ORRVHDVVHPEOLHV
Study, understand, and follow all instructions
provided withon this device before use.
Do not exceed rated capacit\.
Use only on a hard, level surface.
LockKHDGSODWHURWDWLQJPHFKDQLVPbefore
applying load
.
Use onlyKDUGHQHGDSSURSULDWHO\VL]HGEROWVWR
VHFXUHHQJLQHWRVWDQG
(QVXUHHQJLQHLVFHQWHUHGDQGVHFXUHGWRWKH
KHDGSODWH2IIFHQWHUORDGLQJPD\FDXVHWKH
HQJLQHWRURWDWHXQH[SHFWHGO\DQGFDXVHWKH
loaded stand to tip over.
8QORFNDQG
DSSO\URWDWLQJPHFKDQLVPVORZO\DQG
carefull\.
'RQRWPRGLI\RUVXEVWLWXWHKDUGZDUHRQWKLV
device.
2QO\DWWDFKPHQWVDQGRUDGDSWHUVVXSSOLHGE\
the manufacturer should be used.
'RQRWXVHWKHGHYLFHIRUDQ\SXUSRVHRWKHU
than that for which it is intended.
Model ATD-7479 does not FRQWDLQDURWDWLQJ
PHFKDQLVPORFN
ExtraordinaryFDUHPXVWEHWDNHQWRHQVXUH
ORDGGRHVQRWURWDWHZKHQXVLQJ
Failure to heedWKHVHPDUNLQJVPD\result in
personal injury and/or property damage.
To avoid crushing and related injuries
NEVERZRUNRQXQGHURUDURXQGD
ORDGVXSSRUWHGRQO\E\HQJLQHFUDQH
ALWAYSXVHDGHTXDWHO\UDWHGHQJLQH
stand.
OPERATION
WARNING:
ALWAYS verify that the product and the
application
are compatible. NEVER load the engine
stand with an engine that extends beyond an imaginary line
drawn connecting the centerlines of the front and rear wheel/
caster axles as show in Fig 3.
!
)LJXUH3HUSKHUDO/RDGLQJ/LPLWRI(QJLQH6WDQG
WARNING: Ensure Lockpins are installedand secured
in
2
) before loading!
1. (QVXUHDSSOLFDWLRQLVFRPSDWLEOHZLWKSURGXFW
AOLJQ HQJLQH with stand, then adjust mountLQJ arms to
PDWFKEHOOKRXVLQJPRXQWLQJEROWKROHV
&DUHIXOO\ secure HQJLQH so that load is centered on stand.
(QVXUH threads are compatible with \RXU HQJLQH and use
washers on both sides of head plate.
4. )RU modelAT' slowl\and FDUIXOO\ HQJDJH the cranN
handle (see )LJ 1). Use precaution when rotating as this
model does not contain a rotating mechanism lock.
ChecNto ensure stand is secure before ZRUNLQJ on or
DURXQGVWDQG1HYHUZRUNXQGHUORDGHGVWDQG
NOTICE: Useonly the handle provided by the manufacturer.
The handle provided with this stand will safely engage
and operate the head plate. If the handle is worn, bent, or
otherwisedamaged, STOP,discontinue use of the stand until
a factory replacement handle assembly can be acquired.
!
MAINTENANCE
3HULRGLFDOO\ inspect each stand. (QVXUH all parts move freel\.
Lubricate the casters periodicall\. To help prevent rust, wipe
clean after each use.
WARNING: Paint contains lead!
DO NOT sand or grind painted surface!
!
Storage
6WRUHWKHHQJLQHVWDQGLQFOHDQGU\HQYLURQPHQW
WARNING
WARNING
All manuals and user guides at all-guides.com
Item Part# Description
17 +DQGOH $VVHPEO\
%ROW0[
7 :asher
47 3RVW+HDG $VVHPEO\
7 0RXQWLQJ Arm
7 %UDFH
77 /RFNLQJ&DVWHr
7 Caster
9
7 /RFN3LQ
10
7 &RWWHU3LQ
11
7 )URQW/HJ
7 +DUGZDUH.LW
7 Caster
1
4
7
9
10
1
11
)LJXUH5HSODFHPHQW3DUWV,OOXVWUDWLRQIRUPRGHO A7'
Not all components of the MDFN are replacement items, but are illustrated as a convenient reference for position in
the DVVHPEO\ sequence. :KHQ RUGHULQJ parts, JLYH model number, part number and description. &DOO\RXUGLVWULEXWRU
IRUFXUUHQWSULFLQJ
REPLACEMENT PARTS
1
All manuals and user guides at all-guides.com
Notes
All manuals and user guides at all-guides.com
7
DATE MAINTENANCE PERFORMED
PREVENTATIVE MAINTENANCE RECORD LOG
All manuals and user guides at all-guides.com
WARRANTY
1 YEAR LIMITED WARRANTY
THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
385&+$6(')520 _______________________________________
'$7(385&+$6(' ________________________________________
,192,&(5(&(,37180%(5BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
<RXU$7'LVZDUUDQWHGIRUDSHULRGRIPRQWKVIURPWKHRULJLQDOSXUFKDVHGDWH
)RUDSHULRGRIRQH\HDUIURP\RXUSXUFKDVHGDWH$7'7RROV,QFZLOOUHSDLURUUHSODFHDWLWVRSWLRQZLWKRXWFKDUJH\RXU
$7'SURGXFWLILWZDVSXUFKDVHGQHZDQGWKHSURGXFWKDVIDLOHGGXHWRDGHIHFWLQPDWHULDORUZRUNPDQVKLSZKLFK\RXH[SHULHQFHG
GXULQJQRUPDOXVHRIWKHSURGXFW7KLVOLPLWHGZDUUDQW\LV\RXUH[FOXVLYHUHPHG\
7RDFFHVVWKHEHQHILWVRIWKLVZDUUDQW\FRQWDFW\RXUVXSSOLHURUSRLQWRIVDOHGLUHFWO\<RXPD\EHDGYLVHGWRUHWXUQWKHSURGXFW
XQGHUZDUUDQW\IUHLJKWSUHSDLGWR\RXUVXSSOLHUIRUZDUUDQW\GHWHUPLQDWLRQ
,IWKLV$7'SURGXFWLVDOWHUHGDEXVHGPLVXVHGPRGLILHGRUXQGHUJRHVVHUYLFHE\DQXQDXWKRUL]HGWHFKQLFLDQ\RXUZDUUDQW\ZLOO
EHYRLG:HDUHQRWUHVSRQVLEOHIRUGDPDJHWRRUQDPHQWDOGHVLJQV\RXSODFHRQWKLV$7'SURGXFWDQGVXFKRUQDPHQWDWLRQVKRXOG
QRWFRYHUDQ\ZDUQLQJVRULQVWUXFWLRQVRUWKH\PD\YRLGWKHZDUUDQW\7KLVZDUUDQW\GRHVQRWFRYHUVFUDWFKHVVXSHUILFLDOGHQWVDQG
other abrasions to the paint finish that occur under normal use. It also does not cover normal wear items such as but not limited to
EUXVKHVEDWWHULHVGULOOELWVGULOOFKXFNVSDGVRUEODGHV
6XEMHFWWRWKHODZLQ\RXUVWDWH
<RXUVROHDQGH[FOXVLYHUHPHG\LVUHSDLURUUHSODFHPHQWRIWKHGHIHFWLYHSURGXFWDVGHVFULEHGDERYH
$7'LVQRWOLDEOHIRUDQ\LQFLGHQWDOGDPDJHVLQFOXGLQJEXWQRWOLPLWHGWRORVWSURILWVDQGXQIRUHVHHDEOHFRQVHTXHQFHV
7KHUHSDLUDQGUHSODFHPHQWRIWKLVSURGXFWXQGHUWKHH[SUHVVOLPLWHGZDUUDQW\GHVFULEHGDERYHLV\RXUH[FOXVLYHUHPHG\DQGLV
SURYLGHGLQOLHXRIDOORWKHUZDUUDQWLHVH[SUHVVRULPSOLHG$OORWKHUZDUUDQWLHVLQFOXGLQJLPSOLHGZDUUDQWLHVDQGZDUUDQWLHVRI
PHUFKDQWDELOLW\RUILWQHVVIRUDSDUWLFXODUSXUSRVHDUHGLVFODLPHGDQGLIGLVFODLPHULVSURKLELWHGWKHVHZDUUDQWLHVDUHOLPLWHGWR
RQH\HDUIURP\RXUGDWHRISXUFKDVHRIWKLVSURGXFW
Some states’ laws do not allow limited durations on certain implied warranties and some states’ laws do not allow limitations on
LQFLGHQWDORUFRQVHTXHQWLDOGDPDJHV<RXVKRXOGFRQVXOWWKHODZLQ\RXUVWDWHWRGHWHUPLQHKRZ\RXUULJKWVPD\YDU\
>$IIL[UHFHLSWRULQYRLFHKHUHIRUVDIHNHHSLQJ@
All manuals and user guides at all-guides.com
Table of contents
Other ATD Tools Rack & Stand manuals
ATD Tools
ATD Tools ATD-6571 User manual
ATD Tools
ATD Tools ATD-7811 User manual
ATD Tools
ATD Tools ATD-7443 User manual
ATD Tools
ATD Tools ATD-7479 User manual
ATD Tools
ATD Tools ATD-7479 User manual
ATD Tools
ATD Tools ATD-6572 User manual
ATD Tools
ATD Tools ATD-7482A User manual
ATD Tools
ATD Tools ATD-7482 User manual
