Atop ATW330-4X User manual

ATW330-4X
Wireless Coordinator
User’s Manual
v.1.0
Apr. 2022

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
ii
Important Announcement
The information contained in this document is the property of Atop Technologies, Inc., and is
supplied for the sole purpose of operation and maintenance of Atop Technologies, Inc. products.
No part of this publication is to be used for any other purposes, and it is not to be reproduced,
copied, disclosed, transmitted, stored in a retrieval system, or translated into any human or
computer language, in any form, by any means, in whole or in part, without the prior explicit
written consent of Atop Technologies, Inc., offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a utility model or design, are reserved.
Disclaimer
We have checked the contents of this manual for agreement with the hardware and software
described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement.
However, the data in this manual is reviewed regularly and any necessary corrections included
in subsequent editions. Suggestions for improvement are welcome. All other product names
referenced herein are registered trademarks of their respective companies.
Published by
Atop Technologies, Inc.
2F, No. 146, Sec. 1, Tung-Hsing Rd.
Jubei, Hsinchu 30261
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
www.atop.com.tw
Copyright © 2017 Atop Technologies, Inc. All rights reserved. Technical data is subject to
change. All other product names referenced herein are registered trademarks of their own
respective companies.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
1
1 Preface
Purpose of the Manual
This manual supports you during the installation and configuring of the ATW330-4X, as well as it explains
some technical options available with the mentioned product.
Who Should Use This User Manual
This manual is to be used by qualified personnel or support technicians who are familiar with operations;
This manual also provides helpful and handy information for first time users. For any related problems
please contact your local distributor, should they be unable to assist you, please redirect your inquiries via
www.atop.com.tw
Warranty Period
We provide a 1 year limited warranty.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
2
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
3
FOR MOBILE DEVICE USAGE (>20cm/low power eg. AP routers)
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Caution
Beginning from here there will be extreme caution exercised.
Never install or work on electrical cabling during periods of lightning activity. Never
connect or disconnect power when hazardous gases are present
WARNING: Disconnect the power and allow to cool 5 minutes before touching.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
4
2 Introduction
2.1 Product Overview
Wireless coordinator is a data transmission medium between picking control PC and all the picking devices.
Which is Ethernet architecture product, following up the standard TCP/IP communication protocol to
communicate with the host PC.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
5
3 Getting Started
3.1 Inside the Package
Inside the product purchased you will find the following items:
Table 3.1
Item
Quantity
Description
ATW330-41or ATW330-42
1
Wireless coordinator (STD or PoE)
Antenna
1
ANTENNA
Antenna
1
MAGNETIC BASE ANTENNA(Optional)
Adapter
1
12 VDC, 1 A
Documentation
1
User’s Manual
Self-tapping screws
4
M4 * 16mm, button Phillips
Note: Please notify your sales representative if any of the above items is missing or damaged in any form upon delivery. If your sales
representative is unable to satisfy your enquiries, please contact us directly.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
6
3.2 Front & Power Panels
The Front (Figure 3.1), and Power panels (Figure 3.2), are as follow:
Figure 3.1
Figure 3.2

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
7
3.3 First Time Installation
Before installing the device, please adhere to all safety procedures described below, Atop will not be held
liable for any damages to property or personal injuries resulting from the installation or overall use of the
device. Do not attempt to manipulate the product in any way if unsure of the steps described here,
in such cases please contact your dealer immediately.
Prepare the necessary cables, DC adapter, power cord, LAN cable, etc.: do not connect the unit yet.
Install the antenna to the SMA connectors.
Proceed then to plug the power source to the unit, starting from the ground and then the terminal
block.
Place the device in the desired location and connect it to the LAN via an Ethernet cable with a RJ45
connector.
Connect your computer to the LAN network. Default configurations will be addressed later on
Sections.
Note: remember to please consult your Hardware Installation Guide when attempting an installation. Also, please follow all safe
procedures when doing so.

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
8
3.4 System Setup
The following section describes some critical settings for the ATW330-41.
3.4.1PC IP address
View PC Host IP Location This example is 10.3.44.1 Figure 3.3
Figure 3.3
3.4.2 Set up PC IP
Use “System controller\wptl _sys.exe” Figure 3.4
Figure 3.4

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
9
Enter the setting screen Figure 3.5
Figure 3.5
Figure 3.5
Click the “SYS ID”
Enter the setting screen Figure 3.6
“Working IP” Field is set to:10.3..44.1.
Click Update to complete the setting
Figure 3.6

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
10
System Controller ”10. 3. 44. 1” Figure 3.7
Figure 3.7
3.4.3Set up Wireless coordinator IP Address
Use Manager. Click ”Invite”then View Wireless coordinator IP Figure 3.8.
Wireless coordinator IP Address default IP 10.0.50.100
Figure 3.8
ATW330

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
11
Click on the IP Address field and the ”Config “option. Figure 3.9
.
Figure 3.9
Enter the dialog screen .Figure 3.10
Figure 3.10
Modify the IP address / gateway to the same network as the PC. Figure 3.11
ATW330

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
12
Figure 3.11
Click “Config Now” to complete the setting, and the wireless coordinator will restart..
Click “Invite” to confirm the IP address to complete the modification. Figure 3.12
Figure 3.12
Click “Exit”exit Monitor.
ATW330

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
13
3.4.4Wireless coordinator joins system
Use Config tool.\WPTLConfig_v.095. Figure 3.13
Figure 3.13
Enter the setting screen Figure3.14
Figure 3.14

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
14
Click the field to connect the PC. Figure 3.15
Figure 3.15
Click “connect to sys” connect PC. Figure 3.16
Figure 3.16

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
15
Check “SYS ID”
SYS ID field is 1Figure 3.16
Figure 3.16
Click” Add coords”connect Wireless coordinator. Figure 3.17
The Wireless coordinator now makes a "Beep" sound.
Click “ok”Confirm the connection.
Figure 3.17

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
16
Wireless coordinator connection completed. Figure 3.18
Figure 3.18
3.4.5Connect Wireless Pick To Light
Click “Coord ID/Addr”. Figure 3.19
Figure 3.19

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
17
Click “Coord config”. Figure 3.20
Figure 3.20
Set up Wireless Pick To Light channel.
CH.Mode field options”FIX”
Channel List field Select a Wireless Pick To Light channel Default channel 1 this example is 8.
New Tag Association field options”open”
Click “APPLY” Figure 3.21
Figure 3.21

Atop Wireless coordinator
ATW330-4X
User Manual V. 1.0
18
Click “Add Tags”enter List of new Tag detected screen Figure 3.22
Figure 3.22
Start setting Wireless Pick To Light ID address.
Before setting, you must confirm that the tag displays PEND before setting. Figure 3.23
Figure 3.23