ATrack AT1 Series User manual
Confidential Document
Page 2of 9
Contents
1. Notification..............................................................................................................................3
1.1. Disclaimer ....................................................................................................................................3
1.2. Copyright......................................................................................................................................3
1.3. Warning........................................................................................................................................3
2. Introduction.............................................................................................................................4
3. Package Contents....................................................................................................................4
4. Part Descriptions ....................................................................................................................5
5. Installation Instructions.........................................................................................................5
Confidential Document
Page 3of 9
1
1.
.
N
No
ot
ti
if
fi
ic
ca
at
ti
io
on
n
1
1.
.1
1.
.
D
Di
is
sc
cl
la
ai
im
me
er
r
This document, and all other related products, such as device, firmware, and software, is developed by
ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version.
Due to the functionalities of the devices are being developed and improved from time to time, the change in
the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology
Inc. is obligated to modify all the documentation without the limitation of time frame. Achange notice shall be
released to ATrack Technology Inc. customers upon the completion of document modification.
ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack
Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible
means of using or integrating ATrack Technology Inc. products shall be avoided.
1
1.
.2
2.
.
C
Co
op
py
yr
ri
ig
gh
ht
t
ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries.
Any or all parts of this document shall not be exposed to non-authorized party without any form of approval
from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing
or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the
rights of litigation in the violation of such copyright laws.
1
1.
.3
3.
.
W
Wa
ar
rn
ni
in
ng
g
Connecting the wire inputs can be hazardous to both the installer and your vehicle’s electrical system if not
done by an experienced installer. This document assumes you are aware of the inherent dangers of working
in and around a vehicle and have a working understanding of electricity.
Confidential Document
Page 4of 9
2
2.
.
I
In
nt
tr
ro
od
du
uc
ct
ti
io
on
n
Designed for outdoor applications, the AT1 Waterproof Enclosure provides you with extreme level of sealing
protection against water, dust and corrosion. The following are the step-by-step instructions and part
descriptions of the waterproof enclosure. Please use a Philip-head Screwdriver when starting the installation.
3
3.
.
P
Pa
ac
ck
ka
ag
ge
e
C
Co
on
nt
te
en
nt
ts
s
When you open the package, please verify that you received the following items:
(A) Waterproof Enclosure x 1
(B) Mount Plate x 1
(C) Cable Gland Connector x 1
(D) Plastic Screws x 4
(E) Mounting Screws x 2
(F) Small Metal Screws x 2
Confidential Document
Page 5of 9
4
4.
.
P
Pa
ar
rt
t
D
De
es
sc
cr
ri
ip
pt
ti
io
on
ns
s
Assembly of Cable Gland Connector
5
5.
.
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
I
In
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
In this section, we will work you through the installation process. Each part or item is labeled with a capital
letter in parentheses, for instance, Lock Nut (G). Please refer to the package contents and part description
sections for more information.
1. Use an office paper knife to cut through the surface of a Sealing Insert (J) by slicing back and forth gently
until you are able to open it and place the GPS cable through it.
2. Install the Mount Plate (B) with two Mounting Screws (E).
Confidential Document
Page 6of 9
3. Make sure that the SIM card is already inserted before installing the AT1 tracker on the Mount Plate (B).
Please refer to the SIM Card Installation section on the AT1 user manual for more information.
4. Install the AT1 tracker on the Mount Plate (B) with two Small Metal Screws (F).
Confidential Document
Page 7of 9
5.Attach the GPS cable to the AT1 tracker and pass the cable through the Body (I) of the cable gland. Open
the Sealing Insert (J) to place the GPS cable through it and then thread the GPS cable through the Clamping
Claw (K) and the Thread-Lock Sealing Nut (L). Align the parts as shown below.
6. Attach the power cable to the AT1 tracker and pass the cable through the Body (I) of the cable gland.
Thread the power cable through the Sealing Insert (J), Clamping Claw (K) and Thread-Lock Sealing Nut (L).
Confidential Document
Page 8of 9
Align the parts as shown below.
7. Plug the Sealing Insert (J) and the Clamping Claw (K) into the Body (I) and tighten the Thread-Lock Sealing
Nut (L).
8. In order to have an adequate seal, there is a foolproof mechanism as shown below. Please follow this way
to close the enclosure lid.
Confidential Document
Page 9of 9
9. Drive those four Plastic Screws (D) to seal the Waterproof Enclosure (A).
Table of contents
