B-Tech Mountlohic BT7515 Instruction Manual

B-TECH AUDIO VIDEO MOUNTS
www.btechavmounts.com
CONTENTS
INSTALLATION TOOLS REQUIRED
FEATURES
BT7515
FLAT SCREEN WALL MOUNT
WITH DOUBLE ARM EXTENSION, TILT & SWIVEL
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................7
Product Dimensions..........................................................................................................................11
B-Tech Contact Details.....................................................................................................................12
PLEASE KEEP THIS FOR FUTURE REFERENCE
●Designed for medium flat screens up to 42” (107cm) / 25kg (55lbs)
●Fits screens with VESA mounting patterns:
75 x 75mm, 100 x 100mm, 200 x 100mm and 200 x 200mm
●Incorporates post installation screen levelling at wall plate
and screen mount
●Easy tilt adjustment +/-40°
●Features three swivel points: 180° at wall, 360° at central pivot
and 240° at interface
●Security locking screws and Allen key provided for secure installation
●Simple ‘hook-on’ installation with all mounting hardware included
COMPATIBLE
Drill 10mm (7/16") masonry bit
or 6mm (1/4") wood bit
Pencil Stud finder
(optional)
13mm (1/2") spanner
or socket
Community Design No.
001713280-0008

2
INSTALLATION SAFETY INSTRUCTIONS
CAUTION: This wall mount is intended for
use only with the maximum weights indicated. Use
with flat screens heavier than the maximum indicated may
result in instability causing possible injury.
Do not attempt to install this product until all instructions and warnings have been read and properly
understood. Please keep these instructions for future reference.
B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or
injury caused by improper installation, improper use or failure to observe these safety instructions. In
such cases, all guarantees will expire.
General
B-Tech International Ltd recommends that a professional AV installer or other suitably qualified
person install this product. Great care must always be taken during installation as most AV equipment
is of a fragile nature, possibly heavy and easily damaged if dropped.
If you do not fully understand the instructions or are not sure how to install this product safely, then
please consult a professional for advice and/or to install this product for you. Failure to mount this
product correctly may cause serious injury or death both during installation and at any time thereafter.
Do not mount any AV equipment that exceeds the specific weight limit of the product you are
installing. This weight limit will be clearly stated on each product and its packaging and will vary from
product to product.
Flat screen must be fixed to the articulating arm before mounting arm onto wall mount.
Product location
Please pay careful attention to where this product is located. Some walls are not suitable for
installation.
If located in a public or frequently populated area ensure that the product is out of the immediate
reach of people. If any AV equipment is to be suspended over the likely path or location of people
then great care should be taken to secure all parts of the installation from falling.
If you install this product on drywall it must be securely fixed to a wooden stud, concrete block or other
permanent structure behind the drywall board. Installing on drywall boards alone will not support the
weight of most AV equipment.
When drilling holes in walls it is essential to avoid contact with electrical cables and water or gas pipes
contained within. Use of a good quality live wire detector and hidden object locator is therefore
recommended. Only drill into structures when you are sure it is safe to do so.
Fixing hardware
It is highly recommended that all wall fixing screws be used where supplied and that the purpose of all
other fixing hardware is fully understood. In some cases more AV equipment fixing hardware will be
supplied to accommodate different models of equipment and set up configurations.
The installer must be satisfied that any supplied fixing hardware is suitable for each specific
installation. If any fixing screws or included hardware are deemed not sufficient for a safe installation
then please consult a professional or your local hardware store.
Hazard limitation
When routing cables take advantage of any built in cable management features that the product might
provide and ensure that all cables are tidy and secure. Check to see that any moving aspect of the
product can do so unhindered by any cabling.
Some products have moving parts and the potential to cause injury through the crushing or trapping of
fingers or other body parts.
Particular attention to the nature of moving parts is required especially when assembling installing and
adjusting during set up.
Immediately after installations double-check that the work done is safe and secure. Double-check all
necessary fixings are present and are of ample tightness.
It is recommended that periodic inspections of the product and its fixing points are made as frequently
as possible to ensure that safety is maintained. If in doubt consult a professional AV installer or other
suitably qualified person.

3
CS
Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného
instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou
odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné
konstrukce a používat jen po uvedenou maximální výšku.
DE
B-Tech International Ltd. empfiehlt, dass dieses Produkt durch einen qualifizierten AV-Techniker oder eine
andere Person mit geeigneter Qualifikation installiert wird. B-Tech International Ltd, ihre Distributoren und
Händler können nicht für durch fehlerhafte Montage verursachte Beschädigung oder Verletzung haftbar bzw.
verantwortlich gemacht werden. Dieses Produkt muss auf eine geeignetem Untergrund montiert werden und darf
nur bis zum angegebenen Höchstgewicht verwendet werden.
ES
B-Tech International Ltd. recomienda que un instalador de audio y video profesional u otra persona debidamente
cualificada instalen este producto. B-Tech International Ltd, sus distribuidores y concesionarios no se hacen
cargo ni se responsabilizan de ningún daño o lesión provocados por una instalación inapropiada. Este producto
se debe montar en una estructura adecuada y se debe utilizar soportando solamente hasta el peso máximo
indicado.
FR
B-Tech International Ltd. recommande de confier l’installation de ce produit à un installateur AV professionnel ou
à une autre personne dûment qualifiée. B-Tech International Ltd, ses distributeurs et ses revendeurs ne
sauraient être tenus responsables de tout dégât ou de toute blessure résultant d’une installation incorrecte. Ce
produit doit être monté sur un support approprié et utilisé dans la limite du poids maximum indiqué.
IT
B-Tech International Ltd. consiglia di affidare l’installazione di questo prodotto a un installatore specializzato o ad
altra persona adeguatamente qualificata. B-Tech International Ltd, i suoi distributori e rivenditori non accettano
alcuna responsabilità nei riguardi di eventuali danni o infortuni causati da un’errata installazione. Questo prodotto
deve essere fissato a una struttura idonea e utilizzato unicamente sino al peso massimo indicato.
NL
B-Tech International Ltd. adviseert om dit product te laten installeren door een professionele AV-installateur of
andere hiervoor gekwalificeerde persoon. B-Tech International Ltd, haar distributeurs en dealers zijn niet
aansprakelijk of verantwoordelijk voor schade of letsel die is veroorzaakt door onoordeelkundige installatie. Dit
product moet worden gemonteerd aan een geschikte constructie, waarbij het aangegeven maximum gewicht niet
mag worden overschreden.
PL
Firma B-Tech International Ltd. zaleca, aby ten produkt byłinstalowany przez profesjonalnych instalatorów AV
lub inny odpowiednio przeszkolony personel. Firma B-Tech International Ltd, jej dystrybutorzy i dealerzy nie
ponosząodpowiedzialności za uszkodzenia lub obrażenia ciała powstałe w wyniku nieprawidłowej instalacji.
Niniejszy produkt musi byćzamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno
przekraczaćpodanego maksymalnego obciążenia.
PT
A
B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV
profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e
concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta. Este
produto tem de ser montado numa estrutura adequada e utilizado somente até ao peso máximo indicado.
RU
Компания B-Tech International Ltd. рекомендует, чтобы установка данного изделия производилась
инженером по установке аудио-видеотехники или другим специалистом ссоответствующей
квалификацией. Компания B-Tech International Ltd., ее дистрибьюторы идилеры не несут ответственности
за повреждения или травмы, полученные врезультате неправильной установки. Данное изделие должно

BT7515
PARTS LIST
4
Suitable for loads
up to
25kg (55lbs)
16 18
11 16
18
12
9
1
8
13 19
10
14
20
18
3
2
4
6
7
7
22
17
15
21
5
WALL PLATE, ARMS &
TILT PLATE ASSEMBLY
22

5
PLEASE KEEP THIS FOR FUTURE REFERENCE
No. PART NAME QTY
1 WALL PLATE ASSEMBLY 1
2 LONG EXTENSION ARM 2
3 SHORT EXTENSION ARM 1
4 CONNECTOR PLATE 1
5 TILT PLATE 1
6 INTERFACE PLATE 1
7 ADAPTOR ARM 2
8 LEFT COVER 1
9 RIGHT COVER 1
10 ARM COVER 6
11 LONG SHAFT 1
12 SHORT SHAFT 1
13 LONG SPACER 1
14 M13 x 12mm METAL SPACER 2
15 M8 x 12mm PIN HEX SECURITY SCREW 6
16 M8 x 20mm PIN HEX SECURITY SCREW 4
17 M8 METAL WASHER 6
18 M8 PLASTIC WASHER 7
19 M14 PLASTIC WASHER 4
20 M8 x 60mm PIN HEX SECURITY SCREW 1
21 M4 x 8mm PIN HEX SECURITY SCREW 4
22 M8 x 12mm PIN HEX SECURITY SCREW 2
23 CLIPLOGIC™ CABLE MANAGEMENT CLIP 3
24 2.5mm PIN HEX SECURITY KEY (FOR PARTS 21 & A) 1
25 3mm PIN HEX SECURITY KEY (FOR PARTS B & C) 1
26 4mm PIN HEX SECURITY KEY (FOR PARTS D & E) 1
27 5mm PIN HEX SECURITY KEY (FOR PARTS 15, 16, 20 & 22) 2
INTERFACE KIT
A M4 x 12mm PIN HEX SECURITY SCREW 4
B M5 x 16mm PIN HEX SECURITY SCREW 4
C M5 x 25mm PIN HEX SECURITY SCREW 4
D M6 x 16mm PIN HEX SECURITY SCREW 4
E M6 x 25mm PIN HEX SECURITY SCREW 4
F M6 x 12mm SPACER (FOR PARTS C & E) 4
G M8 TO M4 ADAPTOR 4
H M4 WASHER (FOR PART G) 4
FIXING KIT
A1 M8 x 50mm COACH SCREW 4
A2 M8 METAL WASHER (FOR PART A1) 4
A3 NO.10 WALL PLUG (FOR PART A1) 4
23
2726
2524
A2
A1 A3
WALL FIXING KIT
(FOR FIXING MOUNT TO WALL)
FLAT SCREEN INTERFACE KIT
(FOR ATTACHING MOUNT TO
BACK OF FLAT SCREEN)
F
ABCD
EGH

6
INSTALLATION INSTRUCTIONS
1Fix wall plate to the wall using one of the following methods.
i. Concrete / brick walls.
ii. Wood / stud walls.
10mm (7/10")
masonry bit
A3
1A2
A1
1
A2 A1
ATTACH COVERS
9
8
6mm (1/4")
wood bit

7
2Attach the interface to the back of the screen.
TOP
BOTTOM
FLAT
SCREEN
TOP
BOTTOM
FLAT
SCREEN
i.
ii. For 200 x 200mm, attach adaptor arms to interface
A
6
24
6
7
76
24
21
ATTACH ADAPTORS
262524
EDCBA
plate, then attach interface to the back of the
screen.
SCREENS WITH M8 FIXINGS
G
G
G
Screw parts G into the
flat screen fixing holes.
Continue with
screen mounting
steps 2 and 3.

8
4
3
Secure in position using parts 15 and 17.
WALL
17
15
27
27 15
17
Hook flat screen on wall plate.
FLAT
SCREEN
WALL
22
5
6
5mm (0.2")
(APPROX)
FLAT
SCREEN
22
6
y
FLAT
SCREEN

9
5
6
Adjust tilt and fix in position using parts 15 and 22.
+/- 40°
FLAT
SCREEN
27
15
22
To fix extension arm position, tighten parts 16 and 20.
27
FLAT
SCREEN
16
16
20
27

10
7
OPTIONAL ACCESSORIES
Optional - Cliplogic™cable management
FLAT
SCREEN
MAXIMUM CABLE
THICKNESS
O15mm
MAX
CABLE
B-Tech AV Component Shelves & Cable Management.
BT7070
BT7078
BT7077
BT7070
BT7087
23
2
3
CABLE
CAUTION: Ensure there is adequate cable slack for movement of the
screen, and that cables will not be pinched when the mount is closed.

11
BT7515
PRODUCT DIMENSIONS
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
525mm
20.7"MAX 95mm
3.7"MIN
200mm 7.9" 100mm 3.9"
75mm 3"
75mm
3"
100mm
3.9"
200mm
7.9"
WALL PLATE
220mm
8.7"
220mm 8.7"
INTERFACE PLATE
67mm
2.6"
310mm 12.2"
312mm
12.3"
303mm 11.9"
56mm
2.2"
24mm
0.9"
203mm 8"
O8.5mm
0.3"
12°
8.5mm
0.3"
13mm 0.5"
R143mm
(5.6")
R134mm
(5.3")

www.btechavmounts.com
B-TECH AUDIO VIDEO MOUNTS
HEAD OFFICE
Bennett House, Long March, Daventry, Northants., NN11 4NR, UK
Email: [e-mail]
EUROPE
©2011 Bennett Technologies Limited. All rights reserved.
B-Tech Audio Video Mounts is a division of Bennett Technologies Limited.
B-Tech, Better By Design, System 2 and Mountlogic are registered trademarks of Bennett Technologies Limited.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
SINGAPORE
Ruby Industrial Complex,
Singapore 347740
Email: [e-mail]
NORTH AMERIC
A
203 Eggert Road,
Buffalo, NY 14215, USA
Email: [e-mail]
A
SIA PACIFIC
1503 Prosperity Millennia Plaza,
Quarry Bay, Hong Kong
Email: [e-mail]
GERMANY
Dyrotzer Weg 26A, 14612 Falkensee,
Berlin, Germany
Email: [e-mail]
BELGIUM
Brixtonlaan 32, Zaventem 1930,
Brussels, Belgium
Email: [e-mail]
IP-BT7515-V2.1-OR2BX-050111-03 MADE IN CHINA