Babystart Delfina 377/4467 User manual

IMPORTANT: RETAIN FOR FUTURE
REFERENCE, READ CAREFULLY
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Page 1 of 10 BABYSTART COT / TODDLER BED
COT / TODDLER BED

The Babystart cot / toddler bed is designed to be used from birth to approximately 4 years old or 50kg.
The cot can be converted into a toddler bed.
Once assembled, this cot / toddler bed is not designed to be dismantled, transported and reassembled.
Do not discard any packaging until you have checked the parts against the list below.
Please take a few minutes to read through the assembly instructions
Unpack your cot carefully onto a soft level surface such as a carpeted floor.
Familiarise yourself with the parts by comparing them with the checklist provided below.
The cot / toddler bed conforms to BSEN716:2008 and BS8509:2008+A1:2011 Safety Standards for
Cots and Children’s bed.
A
D
B C
Page 2 of 10 BABYSTART COT / TODDLER BED
x 8 x 16 x 8
Long bolt Short boltNut
Allen key

Page 3 of 10 BABYSTART COT / TODDLER BED
1a 1b
2
3
x 2 x 2
x 2
x 1

Page 4 of 10 BABYSTART COT / TODDLER BED
1a
1b
2
2
3
1a
1b

Page 5 of 10 BABYSTART COT /TODDLER BED
1. Fitting the bed base
1a
1a
1b
1b
3
A
B
Ax8 Bx8 Dx1
D
AA
A
A
B
B

2. Fitting the side frames Cx8 Bx8 Dx1
Page 6 of 10 BABYSTART COT / TODDLER BED
C
C
C
CC
C
C
C
C
B
B
B
B
B
B
B
D
1a
1a
1b
3
2
2
1a
1a
1b
1b
3
1a
1b
1a
2
2
1a
1a
1b
1b
3
1a
1b
1a
2
2

1. Unscrew the side and the base Dx1
Page 7 of 10 BABYSTART COT / TODDLER BED
1a
1a
1b
1b
3
1a
1b
1a
2
2
1a
1b
2
2
1a
1a
1a
1b
1b
3
1a
1b
1a
2
2
3
1a
1b
1a
1b

2. Taking the end panels into parts (1a) & (1b)
Page 8 of 10 BABYSTART COT / TODDLER BED
1a
1a
1b
1b
1a
1b
1a 1b
1a
1a
1b
1b
1a
1b
1a 1b
1a
1b
1a
1b
1a
1b
1a 1b

3. Fitting the bed base Ax8 Bx8 Dx1
Page 9 of 10 BABYSTART COT / TODDLER BED
A
AA
A
A
A
B
B
B
B
B
D
1a
1a
3

WARNINGS:
1. Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires,
gas fires, etc. in the near vicinity of the cot.
2. Do not use the cot if any part is broken, torn or missing and use only spare parts approved by
the manufacturer.
3. Do not leave anything in the cot or place the cot close to another product, which could provide
a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
4. Do not use more than one mattress in the cot.
5. Do not place this child’s bed near heat sources, windows, blinds, strings, curtain
cords and other furniture.
ADDITIONAL INFORMATION:
1. Do not allow children to climb the cot. The safety of your child is your responsibility.
2. Before use, please ensure each item of cot is on a stable, level surface.
3. Never pivot or drag the cot / toddler bed when moving. The cot / toddler bed must always be
lifted by at least two people.
4. To avoid the risk of suffocation, keep all plastic bags and packaging out of reach of babies and
young children.
5. The base can be fixed in 3 positions. The lowest base position is the safest and that the base
should always be used in that position as soon as the baby can sit unaided.
6. The recommended mattress size for this cot / toddler bed is 70cm (width) x 140cm (length). The
thickness of the mattress used shall be such that the internal height (surface of the mattress to
the upper edge of the cot frame) is at least 500mm in the lowest position of the cot base and at
least 200mm in the highest position of the cot base.
7. The mattress to be used with this cot / toddler bed should be no more than 30mm shorter or
narrower than the internal length or width of the cot / toddler bed.
8. All assembly fittings should always be tightened properly and that fittings should be checked
regularly and retightened as necessary.
9. To prevent injury from falls, when the child is able to climb out of the cot, the cot shall no longer
be used for that child.
10. Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should
not be placed too close to other furniture or windows, and should be placed either tight to any
wall or have a gap of 300mm between the wall and the side of the bed.
11. Recommendation that any additional or replacement parts are obtained from the manufacturer
or distributor.
CARE OF YOUR PRODUCT:
• Periodically check all fittings to ensure that none have come loose. Any loose fittings must
be tightened using the correct tool.
• Your cot / toddler bed can be cleaned by wiping with a damp cloth and drying with a soft
dry cloth.
• Never clean with abrasives, ammonia based, bleach based or spirit type cleaners.
• Take care when handling or moving the bed. Careless handling can damage wooden furniture.
ARGOS
Avebury 489-499 Avebury Boulevard Milton Keynes
MK9 2NW
Helpline: 08456 400 800
Page 10 of 10 BABYSTART COT / TODDLER BED