Ballard Designs Torano SF090 User manual

Console
REQUIRED TOOLS:
Phillips Screwdriver
-Two person assembly suggested.
Ltr.
A2
B1
Qty. Hardware/Components Included
Wall Anchoring
(Anti-tip) Kit
See page 2
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
ANCHORING HARDWARE INCLUDED
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 8-18-2021 Page 1 of 2
PRODUCT NAME: Torano Console
ITEM NUMBER: SF090
ASSEMBLED DIMENSIONS : 36”H x 72”W x 17 1/2”D
MADE IN INDIA
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
LEVELERS: Console is equipped with Rotary Levelers installed under each Leg. If necessary, adjust-
ments may be made by carefully lifting applicable corner and turning Leveler clockwise/counterclock-
wise.
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
LEVELER

WALL STUD
(C)
(B)
(D)
(A)
WALL BRACKET MUST BE ATTACHED TO WALL STUD
WALL ANCHORING HARDWARE (ANTI-TIP)
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
Ltr.
A4 Small Screw
Retention Belt
Qty. Hardware Included
B4 Large Screw
C4 Bracket
D2
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screws (A).
3. To keep hardware out of view after installation, attach remaining Bracket (C) INTO WALL STUD
with Large Screws (B) 2 inches below Bracket attached to back of unit.
4. Move unit into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
Page 2 of 2
Customer Service: 800-367-2810
Online: www.ballarddesigns.com