Baxton Studio EASTON-QB User manual

STEP 4
STEP 2
ITEM : EASTON-QB
STEP 3
QTY
NO PARTLIST
HARDWARE
ITEM QTY
1HEABOARD 1PC
STEP 1
2
HEADBOARD LEG
WITH LABEL “R”
1PC
3
HEADBOARD LEG
WITH LABEL “L”
1PC
4WING (R) 1PC
5WING (L) 1PC
6FOOTBOARD 1PC
7 FOOTBOARD LEG 2PCS
8SIDE RAIL 2PCS
9SIDE RAIL 2PCS
10 SIDE RAIL LEG 2PCS
11 SLAT 4PCS
12 SUPPORT LEG
WITH ADJUSTABLE FEET
4PCS
AJCBB SCREW
M8 x 20MM 8PCS
BJCBC SCREW
M6 x 15MM 6PCS
CJCBC SCREW
M6 x 25MM 8PCS
DJCBC SCREW
M6 x 35MM 12PCS
JCBC SCREW
M6 x 60MM 2PCS
E
PANHEAD
M4 x 38MM
4PCS
F
SCREW
M4 x 32MM
8PCS
G
SPRING WASHER
M6 x 12MM
18PCS
H
FLAT WASHER
M6 x 19MM
18PCS
I
L - KEY
M4 x 65MM 1PC
J
KL - KEY
M5 x 65MM 1PC
1
3
2R
L
JD
H
I
1
2
5
4
F
4
3
28
9
10
10
8
9
H
ICJ
J
DH
I
JEH
I
1
5
4
Please open the zipper on the back of Headboard Cushion (1) to get more parts. Begin
assembly by attaching each Headboard Leg (2) & (3) to the bottom of the Headboard
Cushion (1) by aligning the hole and securing with 3 Allen Bolts (E), 3 Spring Washer
(F), 3 Flat Washer (G) per leg using L-Key (I).
Attach the pre-set cleat of Headboard Leg (2) & (3) to Wing (4) & (5) by securing
with 2 Screws (F) using Philips Head Screw Driver (NOT INCLUDED) each side.
Attach each wing (4) & (5) to each side of Headboard Cushion (1) by aligning the hole
and securing with 1 Allen Bolt (D) , 1 Allen bolt (E) , 2 Spring Washer (H) , 2 Flat
Washer (I) per side using L-key (J).
Attach the side rail support leg (10) to join of the side rail (8) & (9) by securing
with 4 Allen Bolts (C) , 4 Spring Washer (H) , 4 Flat Washer (I)
per support using L-key (J).

STEP 6STEP 5
STEP 7 STEP 8
ASSEMBLY
COMPLETED
6
7
7
6
7
B
J
11
12
I
D
11
12
8
9
8
9
6
11
G
A
K
11
9
8
8
9
11
11
11
Attach each Footboard Legs (7) to the bottom of the Footboard Cushion (6)
by securing with 3 Allen Bolts (B) per leg using L-Key (J).
Attach Support Legs (12) to Slat (11) by securing with 1 Allen Bolt (D) per support leg using L-Key (I).
Attach Side Rail to the Headboard Leg (2) & (3) & Footboard Cushion (6). Aligning holes and securing with
2 Allen Bolts (A) per each and using L-Key (K).
Do not fully tighten bolts for this step.
Attach Slat (11) to side rail by securing with 1 Screw (G) per each side.
Tighten all screws using phillips head screwdriver (NOT INCLUDED).