BEMIS Flow Grove User manual

USER MANUAL GROVE MOTION ACTIVATED

32
PRODUCT INFORMATION
Important Safeguards
Overview & Parts
Functions & Features
GETTING STARTED
Installation Types
Installation Guide
Pop-Up Drain Installation
How To Use
WARRANTY
Troubleshooting Guide
Warranty
Customer Support
Notes
04
09
18
TABLE OF CONTENTS
Questions?
We’re here to help.
847.458.2334
[email protected]
www.biobidet.com
Registration and
Installation Resources

544
PLEASE OBSERVE THE FOLLOWING PRECAUTIONS
AND INSTRUCTIONS BEFORE INSTALLATION AND USE.
•Powered by 4 AA batteries (not included).
Make sure to install the batteries properly (+/-).
•Use a dry soft cloth to wipe the touch sensor as needed.
•The sensor window indicator will flash every 3-4 seconds when the
battery is low. Replace the batteries as needed.
•The faucet will automatically turn off when the batteries are depleted.
•Immediately check for any leaks.
•Continue to check for leaking throughout the
first hour of installation.
•If leaking occurs, turn off water supply and
discontinue use immediately.
IMPORTANT SAFEGUARDS

76
OVERVIEW & PARTS
Grove
Faucet
Motion Sensor
LED Temperature Display
Smart Touch
Hot Water Line
Cold Water Line
Battery Power Cord
Battery Pack
*Batteries not included
Grove Parts List
PRODUCT INFORMATION
Grove
Faucet
Hot & Cold
Hoses
Rubber Gasket
& Metal Washer
Screw
Set
Pop-Up
Drain
Battery Pack
& Bracket
Wrench Phillips Screwdriver
Recommended Installation Tools
Deck
Plate
3M
Adhesive
Side Handle
Deck Plate

98
FUNCTION & FEATURES
INSTALLATION TYPES
6.8 in
5.5 in
7 in
4.9 in
13.4°
1.8 in
6.5 in
2.4 in
2 in
0.95 in
9/16-24
UNEF
1.5 in
6 in
Features
•Motion Activated
•Touch Activated
•LED Temperature Display
•Adjustable Temperature
•Battery Powered
•Drip-Free Ceramic Cartridge
•Single & Three-Hole Installation
Finishes
•Chrome
•Brushed Nickel
•Oil Rubbed Bronze
•Champagne
Single Hole
Installation
2 Installation Types
Three Hole
Installation

1110
INSTALLATION GUIDE
Deck Plate
Cold Water Line
Hot Water Line
Battery
Power Cord
Rubber Gasket
Metal Washer
Brass Nut
Screw
*For Three-Hole Install ONLY
1. Single Hole or Three Hole Installation
Single Hole - Securely attach the hoses to the faucet. Put the hoses and
data cable through the faucet mounting hole and fix the faucet on the sink.
•Make sure to install the hot and cold water lines in accordance
with the markings.
•Tighten with a Phillips screwdriver.
Three Hole - Securely attach the hoses to the faucet. Put the hoses
and data cable through the deck plate and faucet mounting hole.
Fix the faucet on the sink.
•Make sure to install the hot and cold water lines in accordance
with the markings.
•Tighten with a Phillips screwdriver.
2. Install Rubber Gasket
Slide the rubber gasket first and the metal washer second. Then install
the nut onto the screw. Tighten the nut using an adjustable wrench.
GETTING STARTED

12 13
GETTING STARTED
3. Connect Supply Lines
Connect the hot & cold supply lines
onto the matching water
valves and secure the connection
with an adjustable wrench.
4. Install Battery Box
1. Secure the battery bracket by using 3M adhesive or screws.
2. Insert 4 AA batteries into the battery pack, and place the battery
pack into the battery bracket.
3. Connect the data cables and secure them hand tight. When
completed, turn the hot & cold water lines counterclockwise to
turn the water back on.
*Recommended Placement
6.85 in
9.8 in
OR
Battery
Pack
POP-UP DRAIN INSTALLATION GUIDE
NOTE: The pop-up drain is fully assembled in the box. Disassemble
the pop-up drain so that each component is separate before installing.
After removing the existing drain from your sink, follow the
instructions below to install the pop-up drain.
1. Insert the drain tube through the sink.
2. Slide the washer and cone washer up the drain tube
from beneath the sink.
3. Secure the drain tube to the sink using the nut.
4. Press the drain into the drain tube.
5. Connect the drain tube to the bathroom plumbing. This process may
vary depending on the sink and plumbing of your home. Some methods
include threaded connections, while others use compression fittings.
Drain
Drain Tube
Washer
Cone Washer
Nut

1514
HOW TO USE
Motion Sensor
Place your hands beneath the motion sensor to activate the flow of water.
The water will automatically turn off when you move your hands away.
Touch Sensor
Tap the sensor to activate the flow of water. Tap again to turn off.
The water will automatically turn off after 3 minutes.
Side Handle
Use the side handle to set the water temperature to your liking.
Motion Sensor
Touch Sensor
LED Temp.
Display
TROUBLESHOOTING GUIDE
Problem Cause Solution
Faucet does
not power on
Power cable
unplugged
Unplug and re-plug the power cord.
Ensure the connection is secure.
Low battery Replace with a new battery of the same
brand. Ensure that the positive and negative
terminals of the battery are properly
installed. (Do not mix with old batteries.)
Sensors not
functioning
Motion Sensor
Obstructed
Wipe the motion sensor clean.
Touch sensor failing. Unplug and re-plug the power cord.
Low water
pressure
Water supply
obstruction
Make sure the water shut-off valve is fully
open and there are no kinked hoses.
Clean the faucet spout.
Water is
leaking
Loose connection or
missing gasket.
Double check all connections are secure
and include a gasket.
Please contact customer support with any questions!
Phone: [phone]
Email: [email protected]
Chat: www.biobidet.com

1716
5 YEAR FULL COVERAGE WARRANTY
WARRANTY
Our obligations under this warranty are limited to repair or replacement,
at our option, of products or parts found to be defective, provided that such
products were properly installed and used in accordance with instructions.
Bio Bidet Innovation LLC reserves the right to make such inspections as may
be necessary in order to determine the cause of the defect. Bio Bidet
Innovation LLC will not charge for labor or parts in connection with warranty
repairs or replacements. Bio Bidet Innovation LLC is not responsible for the
cost of removal, return, and/or re-installation of products. This warranty does
not apply to the following items: Damage or loss sustained in a natural calamity
such as fire, earthquake, flood, thunder electrical storm, etc. Damage or loss
resulting from any unreasonable use, misuse, abuse, negligence, or
modification of the product. Damage or loss resulting from sediments or
foreign matter contained in a water system. Damage or loss resulting from
improper installation or from installation of a unit in a harsh and/or hazardous
environment. This warranty gives you specific legal rights. You may have other
rights which vary from state to state.
To obtain warranty repair service under this warranty, you must take the
product or deliver it prepaid to our service facility together with a letter
stating the problem, or contact a distributor or products service contractor.
This written warranty is the only warranty made by Bio Bidet Innovation LLC.
Repair or replacement as provided under this warranty shall be the exclusive
remedy available to the purchaser. We shall not be responsible for loss of the
product or for other incidental, special, or consequential damages or expenses
incurred by the purchaser, or for labor other cost due to installation or
removal or costs of repairs by others, or for any other expense not specifically
stated above. Except to the extent prohibited by applicable law, any implied
warranties, including that of merchantability or fitness for use, are expressly
limited to the duration of this warranty. Some states do not allow limitations
on how long an implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so the above limitation and exclusion
may not apply to you.
100% Coverage on all parts and labor for the entire
product for all five years from original date of purchase.
How to Obtain Service
To obtain service under this warranty, you must contact us to obtain an RMA
(Return Merchandise Authorization) number. Proof of purchase in the form of
a copy of your original receipt must accompany your request.
FLOW BY BEMIS
7900 S IL Route 31 Crystal Lake IL 60014
T: 847.458.2334
F: 847.854.1296
[email protected]
www.biobidet.com
WARRANTY

18 19
Notes
WARRANTY
WARRANTY

Customer Support
T: 847.458.2334
TOLL FREE: 877.339.5214
7900 S IL Route 31 Crystal Lake, IL 60014
[email protected]
www.biobidet.com
THANK YOU!
9.1.22