BERGER BER-022 User manual

1
© 2023 Berger 02/2023 BER-022
TOOLS REQUIRED
PART LIST
Roof Clamp, Snow Rail, Ice Dam,
and Z-Bracket Installation Guide
Rubber Mallet
Safety Glasses
Impact
Driver
Utility Gloves
Part Desciption
A Roof Clamp (with preinstalled bolts)
B Top Bolt
C Snow Rail
D Splice
E Ice Dam
F Z-Bracket
G5/16" Self-Drilling Screw
with Rubber Washer*
H Square Nut
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
C
5/16″
Socket
1/2″ Magnetic
Nut Driver
Item # BER-022
F
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
H
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
G
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
D
*not included
Torque Wrench
3/16"
Allen Wrench
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
E
B
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
A
Please consult all local building codes and ordinances.
Ore sit qui atquam am iusandae et et vit ipsam nobit,
!IMPORTANT:
Please consult all local building codes and ordinances.
Ore sit qui atquam am iusandae et et vit ipsam nobit,
!IMPORTANT:
Please consult all local building codes and ordinances.
!IMPORTANT:

2
INSTALL ROOF CLAMP
INSTALL SNOW RAIL
• It is recommended to...
Attach Roof Clamp (A) to roof seam using the three preinstalled bolts. Refer to the torque setting and load table on page 5.
• Ensure Roof Clamps are aligned, leveled and tightened prior to attaching snow rail. Attach Snow Rail (C) to each Roof Clamp
using Top Bolts (B).
A
D
B
C
NOTE: The maximum allowable unsupported overhang
is 12". The maximum span between roof clamps is 32".
A
D
B
C
AA
12" MAX
32" MAX
12" MAX
32" MAX
12" MAX 32" MAX
Insert color strip into front side
of the rail to match roof color.
FOR STANDING SEAM ROOFS
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)
C
B
C
A

3
© 2023 Berger 02/2023 BER-022
INSTALL Z-BRACKET
• Remove protective covering from adhesive tape on
underside of Z-Bracket and position as required. Fasten
Z-Bracket (F) to roof/mounting surface using two
5/16" Self-Drilling Screws (D)*.
P
32" MAX
V
W
Y
AA
P
32" MAX
V
W
Y
AA
P
32" MAX
V
W
Y
AA
P
32" MAX
V
W
Y
AA
F
D
D
F
INSTALL SNOW RAIL ON Z-BRACKET
• Align slot on Snow Rail (C) with slot on top of Z-Bracket (F).
Attach Snow Rail to Z -Bracket using Top Bolt (B)
and Square Nut (E).
AC
AD
AE
AE
C
B
AC
AD
AE
AE
E
F
E
B
C
F
* 5/16" Self-Drilling Screws not included with Z-Bracket
NOTE: The maximum allowable unsupported overhang is 12".
The maximum span between Z-Brackets is 32".
FOR EXPOSED FASTENER ROOFS
Z Bracket
Clamp
Ice Dam
Top Bolt
Splice
Snow Rail
Square Nut
5/16" Self-Drilling Screw with Rubber Washer
(Not Included)