BesTrix CM 12N User manual

Dear Customer,
We would like to congratulate you on your purchase.
We are doing our best to give our customers top quality
products and service, and we are here to answer any
question you may have on our email:
Sincerely,
BesTrix Team
This manual has been created in order to help you assemble
your new magnetic car mount for the first time.
[email protected]
2020
UPDATED
VERSION
1

The new and improved Bestrix CM 12 Magnetic Car Mount
provides extra safety and convenience for your smartphone
and it is compatible to most types of vehicles and can be
easily installed on any smooth surfaced dashboard. The
magnetic head design allows you to rotate your phone at
any angle and is compatible to all smartphone devices
including all iPhones and Androids.
Installation Guide
Do not operate phone and holder while driving.
Please read this user manual carefully and follow the
instructions to ensure your satisfaction from our product
Scan the QR Code
for a video user manual
2

A. For best practice use the included dashboard
mounting pad on curved or textured surfaces.
B. Important note!
the adhesive tape is not reusable .Please
test the position of the mount before removing the protective
cover and sticking it to your dash.
1
C. Important! Clean the chosen area with the alcohol pad
(included). Allow to fully dry before installing the Dashboard pad.
3

D.Peel protective film o the Dashboard pad, and place the
sticky side down. press and rub around Dashboard pad to
ensure firm adhesive greep
We recommend letting the Dashboard pad
sit for 2 hours Before applying
5
Attach the mount to the Dashboard/Windshield
B. Remove the protection paper from the gel pad.
C. Move the locking lever to “unlocked” position.
Unlocked
A. Adjust the angles of the mount’s arm and
the magnetic head before locking them.
Locked
AB
4

5
Attach the mount to the Dashboard/Windshield
B. Remove the protection paper from the gel pad.
C. Move the locking lever to “unlocked” position.
Unlocked
A. Adjust the angles of the mount’s arm and
the magnetic head before locking them.
Locked
AB
5

D. Press down the suction cup's base to remove all air from
underneath.
E. While pressing the suction cup's base down, move the
locking lever to "Lock".
Press down
lock lever
6

F. Place one metal plate between your phone and your
case, you don't have to glue it on your phone or your case.
G. All that's left is to attach your phone onto the magnet
head, you may place it in any angle you would like of 360
degrees. To detach it you simply grab the phone and pull
it o the mount.
7

If you have any question you can contact us at:
[email protected]
In order to renew the suction cup, simply rinse it under
warm water and let it dry.
www.bestrix.com
*FREE 1 Year Warranty Extension
Scan the QR Code to Get a
Valid for 30 days from the purchase date*
8