Vivo STAND-V003E User manual

  
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
 
Phillips screwdriver
Scan the QR code with your mobile device or follow
the link to helpful videos and specifications related
to this product.
  ! "  #!   #!
$  #!
%  &! '  !
  #!
( ))
-    #&!
* #+
-    #&!
*
-  ,  #&!
-    #&!
( #&
-  "  #&!
( #+
-    #&!
* #&
--.//00 1)/./ - 0
  #! ,  #!   #!
2  #! 3  &! 4  &!
  #!
 ))
5  #!
+ ))
1

)6 .
. #
. &
Slide one pole
clip (H) on the
pole. Add one
dual arm (C).
Choose desired
height and
tighten with Allen
wrench (O).
Use the Allen wrench
(N) to tighten the
screws (K) into the
pole from the bottom
of the base (D).
2
. 
. (
Screw pole connector (G) to pole (E)
and then add pole (F). Use Allen
wrench (M) to tighten down the
grub screws on the pole connector.
Add another cable
management clip.
Slide the single monitor bracket onto the
pole and secure at desired height.

. +
. 7
. 8
Slide monitors onto all brackets.
Add parts (J) and
(I) to secure the
monitors.
Route cables using cable
management clips.
Use the built in adjustment
screws on the brackets to
align your monitors.
For the single
bracket add screw
(L) to secure it.
. * 5. "!
For monitor with curved or recessed back, align spacers (M-F) with
mounting holes in monitor, and secure VESA plate (A) to monitor using
screws (M-B or M-D) and washers (M-E).
For flat back monitor, secure VESA plate (A) to monitor using screws (M-A
or M-C) and washers (M-E).
. * 5. !
3

4
If you do not understand these directions, or if you have
any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are
no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual.
We cannot be liable for damage or injury caused by
incorrect assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please
contact us. We are happy to replace parts to ensure you
have a fully functional product.
96 :
  
Last updated: 4/30/2018
. #
;  
. <
Place Allen wrenches
into slots on clips (H)
for easy access.
Be careful not to extend the arms too far forward or too far backward.