BESTTEN USR-2A1R-1B User manual

This set consists of two remote controlled sockets, one remote
control and one 23A (12V) alkaline battery.
- Each socket receiver can be switched via the remote control or
switched manually on the socket.
- Individual ON and OFF functions on the remote control.
- Easy to use and operate - use one remote control to control a
single socket or program more than one BESTTEN remote
control socket or lamp holder to this remote.
- Very low standby power consumption reduces energy costs
when not in use.
- The socket will remain off after a power interruption reducing fire
risk and saving power.
- Self-learning function, extra remote control or socket can be
purchased and matched to existing units. If you have this
requirement, please contact Bestten Customer Service for more
details.
- Install a Bestten 23A (12V) alkaline battery in the remote control,
making sure the polarity +/- is correct.
- Plug the socket into a power outlet, and plug a device into it.
- Please use the first two pairs of buttons marked 1 and 2 on the
remote to control the socket.
Product:
Features:
Installation:
Product illustration:
Remote ControlSocket
INDOOR WIRELESS REMOTE CONTROL OUTLET
BESTTEN R
Model: USR-2A1R-1B
5
5
Self-Learning Operation:
If any additional BESTTEN remote control socket is to be paired to
your remote, please follow the steps bellow:
- Plug the socket into a power outlet
- Press and hold the ON/OFF button on the socket until the indicator
light on the unit begins to blink;
- Release the button and press the ON or OFF button for any desired
number on the remote.
- Programming is complete when the indicator light on the socket
stops blinking.
- You can use any desired button to control a single socket or control
all sockets simultaneously.
User Manual

Notes: Troubleshooting:
- The sockets are intended for indoor use only. Do not use in areas
of high humidity such as bathrooms.
- Caution: The outlet is rated for a Maximum load of 10 Amps and a
Maximum of 120 Volts (approximately 1200 watts). Do NOT exceed.
- Warning: An internal fuse will blow if the socket is overloaded by
a high power appliance such as an air conditioner, oven, portable
heater etc.
- For your safety, make sure the batteries in the remote controls are
installed correctly before use.
- For best performance change the battery in the remote control on
a regular basis. Remove the battery if remote is not in use for a
long period of time. Replacement batteries can be easily found
online or in stores where batteries are sold.
- The wireless remote range may be shortened by interference from
other electronics, appliances, walls, and other physical barriers.
- Avoid exposing to high temperatures, direct sunlight, or moisture.
- The sockets should be used in areas with proper air circulation.
- Discard all parts of this product in accordance with local
environmental regulations. Do not dispose in regular household
waste.
If a socket is unresponsive, please follow the steps bellow:
- Make sure the socket and device are properly connected and the
power is on.
- Make sure the socket has good air ventilation and is not
overheated.
- Replace the remote batteries with new 23A(12V) batteries. A low
battery may cause decreased range of the remote.
- If the socket was used to control a high power consumption
device, the fuse in the outlet may blow due to the overload.
- If the above methods cannot solve the issue, please contact our
Customer Care for support.
110 Feet (line of sight)
23A(12VDC) alkaline batteryRemote battery
Working voltage for socket h
h
Technical data:
For more products from BESTTEN, please visit our website
www.ibestten.com
Wall Taps PD Quick Chargers USB Receptacles
Smart Wi-Fi Dimmer
Screwless Wallplates
Metal Power Strips Outdoor Power Stakes Travel Adapters
Remote Control Outlets Surge Protectors
Dimmer Switches Standard Receptacles
BESTTEN Products