BigDog BDL-316 User manual

1
01-2016A
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT! PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
Model Number BDL-316 (Rampage)
Maximum Weight Capacity - 300 pounds (136kgs) (User and Equipment)
BIG DOG TREESTANDS
RAMPAGE
(Model BDL-316)
INSTRUCTION MANUAL
BIG DOG TREESTANDS RAMPAGE
Shall you have any questions about the installation and/or use of this product, or any other Big Dog Treestands product(s) do not
hesitate tocall oneof ourcustomer servicerepresentatives toll-freeat [phone] orvisit usonline at bigdogtreestands.com.
Ourservicerepresentativeswillansweranyquestionsyoumayhaveabout anyof thecomplete lineofBigDogTreestandsproducts.
Big Dog Treestands, Inc. 120 Detroit Parkway PO Box 952 Morton, IL 61550 - Printed in China
Do not return this product to
the retailer. Call Big Dog Tree-
stands for replacement of any
damaged parts, toll-free at
[phone].
InspectALLproductcomponentsfor evidence
ofdamageor wear sustainedduringshipping,
handling, manufacturing of the product prior
to assembly or use. If for any reason you are
not satised with product or with any product
component, DO NOT use until the problem
has been resolved.
WARNING! THIS PRODUCTCARRIESASTRICT WEIGHT LIMIT. DO NOT USE THIS PRODUCTIF
YOU EXCEED THISTOTALWEIGHT LIMIT. PLEASE NOTE THIS WEIGHT LIMITINCLUDESTHE
USERAND EQUIPMENT. FAILURE TO FOLLOWTHESE INSTRUCTIONS MAYRESULT IN SERIOUS
INJURY OR DEATH!
THANK YOU FOR YOUR PURCHASE OF THIS QUALITY BIG DOG TREESTANDS PRODUCT! TO EN-
SURE YOUR PERSONAL SAFETY, PLEASE TAKE A MOMENT TO CAREFULLY READ THIS PRODUCT
INSTRUCTION MANUAL IN ITS ENTIRETY BEFORE ATTEMPTING TO SET-UP, INSTALL AND/OR OTH-
ERWISE USE THIS BIG DOG TREESTANDS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERI-
OUS PERSONAL INJURY OR DEATH! THIS BIG DOG TREESTANDS PRODUCT HAS BEEN DESIGNED,
ENGINEERED AND MANUFACTURED TO PROVIDE YOU WITH YEARS OF TROUBLE FREE SERVICE.
WARNING!You mustread, understand, andfollowALLsafety warningsand instructions priorto eachuse.Addition-
ally, youmust testand practicewith productat ground-levelprior tousing itat heightsabove ground-level.Failure to
follow these instructions will result in serious injury or death!
WARNING! Prior to each hunt, make certain you have a signaling device (e.g., mobile phone, cell phone, radio,
whistle, signal are, Personal Locator Device [PLD], etc.) in your possession and on your person in an operable
condition. This device must be within easy access shall you experience the need to contact emergency assistance.
Failure to follow these instructions may result in serious injury or death!
This Instruction Manual meets industry standards recognized by the
Treestand Manufacturers Association - “Standard Practice for Treestand
Instructions”and-“StandardTestMethodforTreestandFallArrestSystems”

2
01-2016A
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT! PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
WARNING! FALLS FROM ATREESTAND CAN OCCURANYTIMEAFTER LEAVING THE GROUND. THESE FALLS RESULT IN
EITHER SERIOUS INJURY OR DEATH! FOR YOUR PERSONAL SAFETY, PLEASE TAKE AMOMENT TO CAREFULLY READ
THISPRODUCTINSTRUCTIONMANUALINITSENTIRETYBEFOREATTEMPTINGTOASSEMBLE, SET-UP,INSTALLAND/OR
OTHERWISE USETHIS BIG DOG TREESTANDS PRODUCT.AT LEASTANNUALLY, REVIEW THE CONTENTS OFTHIS INSTRUCTION
MANUALAND WATCH THE SAFETREESTAND HUNTING DVD. ADDITIONALLY, KEEP THESE INSTRUCTIONS FORTHE ENTIRE DU-
RATIONYOUOWNTHISPRODUCT(S). FAILURETOFOLLOWTHESEINSTRUCTIONSMAYRESULTIN SERIOUSINJURYORDEATH!
WARNING! THE SAFE USE AND OPERATION OF THIS PRODUCT(S) IS THE SOLE RESPONSIBILITY OF THE USER. A
SAFE TREESTAND HUNTING VIDEO HAS BEEN PROVIDED WITH THIS PRODUCT. YOU MUST WATCH THIS DVD IN ITS
ENTIRETY. IT ISALSO THE SOLE RESPONSIBILITY OF THE OWNER TO PROVIDE ANY PERSON(S) WHO BORROW OR
PURCHASE THIS PRODUCTWITH THESE INSTRUCTIONSAND THE SAFETREESTAND HUNTING VIDEO. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH! ADDITIONALLY, FAILURE TO FOLLOW THESE INSTRUC-
TIONS MAY SUBJECTYOU TO PERSONALLIABILITY PENALTIESAS DETERMINED BY THE U.S. JUDICIALSYSTEM.
ATTENTION!!
WHEN YOU SEEA“WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION
CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
WARNING! Failure to read and strictly comply with the instructions contained in this Instruction Manual may result in serious injury or
death! PLEASE NOTE THAT “WARNING!” statements have been placed throughout this Instruction Manual. These statements point-out
important safety information and instructions, which, if not followed, could endanger the personal safety and/or property of the operator.
It is imperative that the operator of this product, or any other Big Dog Treestands product(s) read and understand all the instructions and
warnings contained in this Instruction Manual prior to attempting to use this product(s), or any other Big Dog Treestands product(s). Failure
to comply with these instructions and/or warnings may result in serious injury or death! When you see a “WARNING!” statement- BE SURE
TO HEED THE MESSAGE!
WARNING! Thoroughly inspect this or any other Big Dog Treestands product(s) prior to each use for signs of wear, rot, corrosion, cracks,
deteriorationand/or anyothertypeofdefect. DONOTexpose thisproducttoextended exposure todirectsunlight,excessive heat orfreezing
temperatures.Do not use this or any other Big DogTreestands product(s) ifthey show evidence of wear, rot, corrosion, cracks,deterioration
and/or any other type of defect. Failure to follow these instructions may result in serious injury or death!
WARNING! Do not remove, modify and/or omit any portion or otherwise mechanically modify this Big Dog Treestands product(s) or its as-
sembliesin any manner. Modification, additions,misuse and/or part substitution shall immediately void yourfactory warranty and may result
serious injury or death! If you suspect a part(s) is missing and/or defective, immediately contact Big Dog Treestands toll free at (866) 387-
2002 for replacement of missing or defective parts. Never modify your stand in any way by making repairs, or altering, adding or attaching
anything to it except if explicitly authorized in writing by Big Dog Treestands.ALWAYS USE GENUINE FACTORYAUTHORIZED BIG DOG
TREESTANDS REPLACEMENT PARTS. USE OFANY REPLACEMENT PARTS OTHER THAN GENUINE BIG DOGTREESTANDS PARTS
VOIDS YOUR WARRANTYAND RELIEVES BIG DOG TREESTANDS OFANY RESULTANT LIABILITIES AND MAY RESULT IN SERIOUS
INJURY OR DEATH!
WARNING! This Big Dog Treestands product(s) is designed for adult use only. No one under the age of 16 shall attempt to use this or any
other Big Dog Treestands product(s) without direct adult supervision. Replace all hardware/cables/nuts/bolts/clips on your tree stand every
two (2) years or sooner if inspection finds it necessary. Use only Big Dog replacement straps and parts. Use of any other straps or parts,
which are not genuine Big Dog Treestands straps and parts, will be viewed as a modification to the product. Any modification will void the
warranties and relieve Big Dog Treestands Inc. from all liabilities. Failure to follow these instructions may result in serious injury or death!
WARNING! Prior to attempting to use this or any other Big Dog Treestands product(s), you must take a moment and become familiar with
its assembly, setup and installation. You must practice installing, setting-up and using this product(s) at ground level prior to attempting
to use it at heights above ground-level. Once you have become thoroughly knowledgeable and comfortable with this Big Dog Treestands
product(s) set-up, installation and use at ground-level, you are now ready to use it at heights about ground-level. Failure to follow these
instructions may result in serious injury and death!
WARNING! ALWAYS inspect/check ALL expiration dates/tags on all straps and the full-body fall arrest harness prior to each use. You must
replaceALL straps (ratchet, cinch, button, stabilizing straps/ropes, etc.) and suspension seats EVERY year. Never use any strap(s) or full-
body fall arrest harness that has expired or is showing any damage or wear. Replace all hardware/cables/nuts/bolts/clips on your tree stand
every (2) years or sooner if inspection finds it necessary. Use only Big Dog replacement straps and parts. Any other straps or parts will be
viewed as a modification to the product. Any modification will void he warranties and relieve Big Dog Treestands Inc. from all liabilities.
Failure to follow these instructions may result in serious injury and death!
WARNING! When hunting from a treestand, falls can occur any time after leaving the ground causing injury or death.Always wear your Big
Dog Treestands full-body fall arrest system comprising a full-body fall arrest harness at all times after leaving the ground. You must stay
connected at all times after leaving the ground. Single safety belts and chest harnesses are no longer allowed and shall never be used as
they put the user at serious risk of injury or death. If you are not wearing your full-body fall arrest harness properly attached to the tree that
is protecting you from a fall, do not leave the ground. Failure to follow these instructions may result in serious injury or death!
WARNING! Never rely on a tree branch for support while climbing. Failure to follow these instructions may result in serious injury or death!
WARNING! You must always inform someone of your hunting location, where the treestand will be located and the expected duration of the
hunt. Failure to follow these instructions may result in serious injury or death!
WARNING! Inspect all safety devices each time before each use. DO NOT use these devices if it (they) shows signs of wear, damage,
deterioration, or vandalism. Factors such as tree growth, vandals, weather and animals may affect the performance of an unattended tree
stand. Do not store these devices outdoors when not in use. Failure to follow these instructions may result in serious injury or death!

3
01-2016A
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT! PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
ATTENTION!!
WHEN YOU SEEA“WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION
CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
WARNING! Practice the use your full-body fall arrest harness at ground level in the presence of a responsible adult to experience the feel-
ing of hanging suspended before using it in a hunting environment. Failure to follow these instructions may result in serious injury or death!
WARNING! The length of the full-body fall arrest lanyard must be minimized at all times. It shall be adjusted so it is above the head with no
slack (snug) in the sitting position and you shall have the minimum amount of slack possible when climbing. Failure to follow these instruc-
tions may result in serious injury or death!
WARNING! Failure to follow harness instructions could result in not being able to return to the stand and being suspended in a harness
after a fall. If your hunting location is unknown by anyone and communication efforts are unsuccessful, you must have a personal plan for
self-recovery/escape shall you experience a fall. Prolonged suspension in a harness can be fatal. It is important to exercise the legs by
pushing against the tree or doing other forms of continuous leg exercises to avoid blood pooling while being suspended. Varying degrees
of physical fitness may require different plans for self-recovery/escape to minimize the effects of prolonged suspension. Have a personal
plan and practice it in the presence of a responsible adult before leaving the ground. No one escape/rescue plan will work for every hunter,
on every tree, in every circumstance. Only you can determine the best self-recovery/escape plan for your hunting situation and you must
have a self-recovery/escape plan for your individual situation before leaving the ground. There is time to make a correct decision on what
action to take if a fall occurs while wearing a full-body fall arrest harness. It is important to remember, “DO NOT PANIC.” You must only
hunt from the ground when self-recovery/escape ability is absent. Failure to follow these instructions may result in serious injury or death!
WARNING! Asuspension relief device must be on your person and readily accessible while using a harness. These devices allow the user
to relieve the load on the lower extremities if suspended in a harness and help maintain circulation in the legs, mitigate suspension trauma
(blood pooling) or allow descent to the ground. Be sure to follow the manufacturers’ directions on the safe use of any suspension relief
device. Several optional products/systems are available that offer self-recovery or self extraction from a fall when suspended in a harness.
Some systems automatically descend the user while others allow user control. One of these products/systems can be considered for use
as an additional safety precaution against prolonged suspension and suspension trauma. Be sure to follow the manufacturers’directions on
the safe use of these products/systems. Failure to follow these instructions may result in serious injury or death!
WARNING! If you have a limiting physical and/or health condition that precludes and/or renders you incapable of self-recovery and/or a
suitable escape plan is not available, DO NOT hunt from heights above ground level. Failure to follow these instructions may result in seri-
ous injury or death!
WARNING! NEVER allow the harness lanyard to get under your chin or around your neck. This poses a choking hazard that can lead to
serious injury or death. Failure to follow these instructions may result in serious injury or death!
WARNING! Never attempt to climb up or climb down with a weapon and/orgearinyourpossession.ALWAYSunloadyourweaponandpullit
up to hunting height using a tether or pull up rope.ALWAYS lower your unloaded weapon down to the ground prior (when raising or lowering
firearms, the chamber must be open and the barrel pointing toward the ground) to attempting to climb down. Use this same method when
raising or lowering all other gear. Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT attempt to use this and/or any other Big DogTreestands product(s) when ice, snow and/or freezing rain has deposited
or formed on any portion of the tree you intend to climb. Failure to follow these instructions may result in serious injury or death!
WARNING! ALWAYS maintain three-point contact when climbing up/down a tree when using climbing aids (e.g., ladders, climbing sticks,
stacking steps, etc.). Proper three-point contact means having either two (2) feet with one (1) hand or one (1) foot with two (2) hands on the
stepportion oftheclimbing aidsatalltimes whenclimbingup ordown.Failuretofollowtheseinstructions mayresultinseriousinjuryordeath!
WARNING! NEVER adjust ANYstraps, cables, and/or adjustable support bars while standing on or leaning against any treestand. DO NOT
use any treestand if there is any damage, wear, or excessive corrosion on any part of the treestand or the full-body fall arrest harness.
Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT modify, fix/repair, alter, bend, cut, weld, or heat this product in any way. Failure to follow these instructions will void
warranty and may result in serious injury or death!
WARNING! DO NOT lean out from a treestand for any reason. Never use your full-body fall arrest harness to help you lean out of your
treestand to make a difficult shot. Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT use this or any other Big Dog Treestands product(s) if you have a history of heart problems, back problems, impaired
vision,joints that lock-up,spinalfusions,equilibrium problems, highbloodpressure,are not well-restedand/oranyother physicalimpairment
that may limit your ability to use and/or operate this product(s) in the safe manner outlined in this Instruction Manual. Additionally, do not
use this or any other Big Dog Treestands product(s) if you are currently taking any medication (including prescription) and/or using and/or
consuming any substance, including alcohol, that may limit your ability to use this Big Dog Treestands product(s) as outlined and described
in the Instruction Manual. Never use a treestand when feeling ill, nauseous or dizzy. Do not use ANYBig Dog Treestands product(s) without
consent from your medical doctor for safe and proper use of the treestand and fall arrest system. Failure to follow these instructions may
result in serious injury or death!
WARNING! DO NOT attempt to use this or any other Big Dog Treestands product(s) when thunderstorms are threatening and/or present
within five (5) miles. Do not attempt to use this or any other Big Dog Treestands product(s) when any other adverse weather condition
presents itself. These include weather conditions which have the potential for producing winds, lighting, rain, snow, sleet and/or any other
atmospheric condition which may limit the user’s ability to operate this Big Dog Treestands product(s) in a safe manner as described in this
Instruction Manual. Shall inclement weather conditions arise during your use of this Big Dog Treestands product(s), return to the ground
immediately. Failure to follow these instructions may result in serious injury and death!
WARNING! DO NOT use this product,orattempt to use a treestand,ona dead, leaning, diseased, loosebarkedtree (bark that flakes orfalls
off), irregular shaped trees, or utility poles. DO NOT use this product on any tree that does not allow for a level standing platform. Failure
to follow these instructions may result in serious injury or death!
WARNING!Neverjumporbounce onatreestandto seatittothe tree.Failuretofollow these instructionsmayresultin seriousinjuryordeath!

4
01-2016A
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT! PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
BIG DOG TREESTANDS RAMPAGE COMPONENTS
FIGURE 1: BIG DOG TREESTANDS RAMPAGE COMPONENTS
X
A
D
F
G
J
K
M
N
C
S
W
U
Q
VR
B
A. (1) Shooting Rail Assembly (a/b/a) Part #SR-370
B. (1) Mesh Seat With 2 Plastic Tubes Part #LSC-315
C. (2) Arm Rests Part #AR-316
D. (2) Adjustable Shooting rail sleeves Part #AS-200
E. (2) Seat Tubes Part #ST-714
F. (1) Front Seat Support Tube Part #FST-316
G. (2) Seat Support Tubes Part #SST-316
H. (1) V-bar Part #VB-376
I. (2) Platform Support Brace Part #PSB-300
J. (2) Z Connection Tubes Part #ZT-316
K. (1) Foot Rest Part #FR-370
L. (1) Left Foot Platform Part #LFP-316
M. (1) Right Foot Platform Part #RFP-316
N. (1) Sub-frame Part #SF-316
O. (2) Cross bars (27-3/4”) Part #CT-705
P. (1) Top Ladder Section Part #TLS-316
Q. (4) Quick Pins Part #8010
R. (2) Ladder Sections Part #L-316
S. (2) Looped Ratchet Strap Part #LR-200
T. (2) 16' Stabilizing Ropes Part #TR-250
U. (1) 8’ Stabilizing Rope Part #TR-200
V. (1) Adjustable Support Bar Assembly Part #ASA-500
W. (1) Adjustment Wingbolt Part #8520
X. (1) Full-Body Fall Arrest Harness Part #BDH-2000S
(1) Shooting Rail Pad Part #P376
(10) Thick Plastic Washer Part #4510
(2) 6mm Long Quick Bolt Part #7028
(1) 8mm x 1-5/8” Bolt Part #1513
(4) 8mm x 2-1/8” Bolt Part #1516
(2) 6mm x 1-1/8” Bolt Part #1011
(4) 6mm x 1-3/8” Bolt Part #1012
(2) 6mm x 2-1/8” Bolt Part #1016
(2) 6mm x 3-1/2" Bolt Part #1023
(8 ) 6mm Metal Washer Part #3010
(2) Nylon Washer Part #4010
(8) 8mm x 2" Bolt Part #1515
(4) 8mm x 3” Bolt Part #1520
(8) 6mm x 2” Bolt Part #1015
(16)8mm Locknut Part #2510
(18)6mm Locknut Part #2010
(2) Tube Caps Part #4514
(1) Wingnut Part #6010
(2) Arm Rest pads Part #F451
(a)
(b)
P
T
WARNING! Use only the Big Dog Treestands full-body fall arrest harness that meets TMAstandards and is provided with this
product.NOTE:You must storeyourfull-bodyfallarrest harness outofdirectsunlightandout of anyotherharshenvironmental
condition(s)that may adversely affectits performance. Failure tofollowthese instructions may resultin serious injury or death!
BIG DOG TREESTANDS FULL-BODY FALLARREST HARNESS
We are very serious about your personal safety. A Big Dog Treestands full-body fall arrest harness has been included
with this product for your use. The Big DogTreestands full-body fall arrest harness has been designed to keep you from
experiencing a fall. Remember, the most important part of your hunt is returning home to your family safe and sound.
READTHEBIGDOGTREESTANDSFULL-BODYFALLARRESTHARNESSMANUALCAREFULLYANDFOLLOWALLTHE
INSTRUCTIONS!YOUR NEW FULL-BODYFALLARREST HARNESS IS DESIGNEDFORAMAXIMUM CAPACITY OF 300
POUNDS(136kgs).ADDITIONALLY,YOURNEWFULL-BODYFALLARRESTHARNESSMUSTBEREPLACEDAFTERTWO(2)
YEARSOFSERVICE!REPLACEYOUR HARNESSIMMEDIATELYSHALLYOU EXPERIENCEAFALLWHILEWEARING IT.
WARNING! You must use at least three (3) adults to install and/or take down this ladder treestand. Failure to follow these instructions may
result in serious injury or death!
WARNING! You must install and attach the criss-cross straps (i.e., 16’ stabilizing ropes) and other stabilization devices as described in
this Instruction Manual prior to attempting to climb this treestand. Failure to follow these instructions may result in serious injury or death!
WARNING! When installing this ladder treestand you must bounce on the first rung to set the ladder into the ground prior to attempting to
climb any higher. Failure to follow these instructions may result in serious injury or death!
WARNING! You must check every ladder section connection every time you use the stand before you leave the ground. If you find that
the ladder sections are separating, DO NOT USE the treestand. Failure to follow these instructions may result in serious injury or death!
WARNING!Youmust checkthegroundunder thetreestandtomake sureitisfirmandlevel.Sloping groundorunevensurfaces (e.g.,onefoot
ona rock)cancause yourladdertotilt orshiftoffthetree asyouclimb.Failuretofollowthese instructionsmayresultinseriousinjuryor death!
WARNING! You must maintain three (3) points-of-contact when climbing a ladder treestand (i.e., two feet-one hand, two hands-one foot).
Failure to follow these instructions may result in serious injury or death!
WARNING! You must always lean forward as you climb and attach your full-body fall arrest harness to the tree before securing the platform
to the tree and stepping onto the standing platform. Failure to follow these instructions may result in serious injury or death!
SPECIALCONSIDERATIONS FOR LADDER TREESTAND USAGE
E
H
I
L
O

5
01-2016A
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT! PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
BIG DOG TREESTANDS BIG RAMPAGEASSEMBLY
FIGURE 2
PLATFORM/SEAT/
SHOOTING RAIL
ASSEMBLY
FIGURE 3
LADDER AND
CROSS TUBE
ASSEMBLY
D
G
J
M
N
C
C
I
L
O
K
H
(a)
(a)
(b)
P
STEP 1: Locate the left/right foot platform (L&M) (refer to Figure 1). Bolt them together as shown in Figure 2 using
two (2) 8mm x 2” bolts and locknuts. Locate the sub-frame (N) (refer to Figure 1). Bolt it to the assembled platforms
as shown in Figure 2 using four (4) 8mm x 2” bolts and locknuts. Locate the foot rest (K) and Z connection tubes
(J) (refer to Figure 1). Install them with assembled platforms as shown in Figure 2 using two (2) 8mm x 3” bolts and
locknuts with (1) nylon washer between the foot rest and foot platform tube ends on both sides.
STEP 2: Locate the seat support tubes (G) (refer to Figure 1). Install them to the Z connection tubes (J) as shown in
Figure 2 using two (2) 6mm x 1-3/8” bolts and locknuts with four (4) 6mm metal washers. Locate the V-bar (H) (refer
to Figure 1). Install it to the seat support tubes (G) as shown in Figure 3 using two (2) 8mm x 3” bolts and locknuts.
Note: Teeth plate on the welded V-bar shall be facing toward foot platform.
STEP 3: Locate the platform support braces (I) (refer to Figure 1). Bolt them to the back side of the foot platforms as
shown in Figure 2&3 using four (4) 6mm x 2” bolts and locknuts. Bolt the platform support brace to the seat support
tubes (G) as shown in Figure 3 using one (1) 6mm x 2-1/8” bolt and locknut and repeat on the 2nd platform support
brace. Locate the arm rests (C) and adjustable shooting rail sleeves (D)(refer to Figure 1), insert the adjustable
shooting rail sleeve to the front of the arm rest which has the 2nd hole in the arm rest lower than other side. Bolt
the arm rests (C) to the outside of seat support tubes (G) as shown in Figure 2&3, using (2) 6mm x 2” bolts and
locknuts, repeat on other side.
STEP 4: Locate the seat tubes (E), front seat support tube (F), mesh seat with (2) plastic tubes (B), and four (4)
thick plastic washers. Install mesh seat with (2) plastic tubes (B) to seat tubes (E) as shown in Figure 4. Using
one (1) 8mm x 2-1/8” bolt and locknut on each side, bolt the seat tubes (E) to the front seat support tube (F) with
two (2) thick plastic washers on each side between the seat tubes (E) and front seat support tube (F) as shown in
Figure 4. Locate the shooting rail assembly (A) (refer to gure 1). Insert the shooting rail sections (a) to the middle
section (b) on each side as shown in Figure 3 bolt together using two (2) 6mm x 1-1/8” bolts and locknuts. Locate
the assembled mesh seat containing parts (B,E&F) and bolted shooting rail assembly (A). Install them to the arm
rests as shown in Figure 2 using two (2) 6mm x 3-1/2” bolts, six (6) thick plastic washers and two (2) 6mm locknuts.
(Bolt Stack: shooting rail →thick plastic washer → arm rest (top hole) → two (2) thick plastic washers → seat tube).
FIGURE 4
MESH SEAT
ASSEMBLY
F
B
E
Two Thick Plastic
washer
STEP 5: Locate the top ladder section (P) (refer to Figure 1), Note: the top ladder section has a set of pre-drilled holes below
the top ladder rung. Install it to the Z connection tubes as shown in Figure 3 using two (2) 6mm x 1-3/8” bolts and locknuts with
four (4) 6mm metal washers. Important: All bolts must be loose to install top ladder section.
STEP 6: Locate the cross bars (O) (refer to Figure 1), install them as shown in Figure 3 to the outside of top ladder (P) using
Note: Do NOT tighten any nuts/bolts until product is fully assembled. You will need two (2) 13mm wrenches and two
(2) 10mm wrenches to tighten the assembly (not provided).