Black Shark FunCooler 3 Pro User manual

Black Shark FunCooler 3 Pro
Read this manual carefully before use, and retain it for future reference.

Device layout
How to use yourcooler
Pull the side arms to fit your phone.
On/Off button
Type-C power port

*If “(Optional) Configure the cooler” is not performed, the cooler will be the default mode.
*When the cooler is working, the temperature of the device decreases. Then the warm and humid air will
condense into water droplets and attach to the surface of the cooler. This is normal.
1. Download and install the app.
Configuring the cooler
Specifications
*The USB type-C cable does not support fast charge for mobile phone.
Product Name: Black Shark FunCooler 3 Pro
Model: BR31
Connection method: Bluetooth 4.2
Support OS: Android 6.0 or above, iOS 12 or above
Power port: Type-C
Compatibility: phones of width between 67mm and 88mm
Contents: Cooler x 1, USB type-C cable* x 1, User manual x 1, QR code card x 1
2. Switch on the cooler.
1) Attach the cooler to the back of your phone and keep it as close as possible to your phone.
When installing, watch out the buttons on the side of the phone.
2) Connect the adapter to the cooler through the USB-C cable. Make sure the output power of
the adapter is no less than 20W.
3) Switch on the cooler.
Once the power is on, the cooler enters Bluetooth pairing mode. If no phone connect to the
cooler, the green light will flash for 30 seconds, and then the lighting effect will be restored to
the user settings or factory default mode. Bluetooth pairing mode will always be on.
3. (Optional)* Configure the cooler.
1) Turn on Bluetooth on the phone, and connect the cooler in the Shark Space or app.
2) Set the lighting effect and cooling mode. Also, you can view the temperature data of the
cooler in Shark Space or the app.
Black Shark phone support performing configuration in the Shark Space. There is no need to
download the app. And please make sure the OS version of the phone is the latest.

EU Regulations
For more information
Join us in the Black Shark community at https://global.blackshark.com.
Like us on Facebook at https://www.facebook.com/BlackSharkGlobal.
Follow us on Twitter at https://twitter.com/blckshrk_global.
Subscribe to us on YouTube at https://www.youtube.com/c/BlackSharkGlobal.
YouTube is a trademark of Google LLC.
For more information about warranty, visit https://global.blackshark.com.
Copyright © 2022 Blackshark Technologies (Nanchang) Co., Ltd. All Rights Reserved.
All illustrations in this guide are for your reference only. The actual device may vary. If
there is any inconsistency between this guide and the description on the official
website, please refer to the description on the official website. BLACK SHARK may
update this guide without prior notice. Changes will be incorporated into new
editions of this guide.
Hereby, [Blackshark Technologies (Nanchang) Co., Ltd.] declares that this equipment
is in compliance with Electromagnetic Compatibility Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at
https://global.blackshark.com.
Manufacturer: Blackshark Technologies (Nanchang) Co., Ltd.
Address: Room 815-1, Floor 8, Block A, Huajiang Building, No.1 Tsinghua Science
Park, No.299, Yupingdong Street, Nanchang Economic and Technological
Development Zone, Nanchang City, Jiangxi Province
EU-Representative: Triskelion Technology SL
Address: Paseo de la Castellana 77, ed wework, 28046, Madrid, Spain
Contact Email: [email protected]

* If you press and hold the Power button and Volume button of Black Shark 4/4 Pro
synchronously, the phone will enter the FASTBOOT mode. To exit this mode, please
press and hold the Power button.
Power button
Volume Button
Slide to the middle
Special scene: Use the cooler with Black Shark 4/4 pro
Avoid the Power button and Volume button on the side of the phone and attach
the cooler to the back of your phone.
Slide the cooler to the middle of the phone and keep it as close as possible to
your phone. And make sure that the cooler arms will not press the Power button
and Volume button on the side of the phone.
2.
1.