Blue Mark DroneBeacon db120 User manual

Status LEDs
Ready for take-off: slowly
flashing (every 4s), location acq.
Non-compliant config: very slow
flashing (every 20s), location acq.
Acquiring location
QUICK START DB120
(rev 20230418)
Attach to the drone
Attach the db120 on the top of
your drone:
Use the 3M dual lock™
stickers (included).
And/or use two M5 screws.
Use the db120
Power on the db120.
Wait for Status LEDs to
signal Ready for take-off.
You are ready to fly.
e
e
l
e
e
l
e
e
e
e
l
e
e
l
e
e
e
e
l
e
e
l
e
e
Charge
Charge the db120 using a USB-C
charger. Charging LED turns
green if fully charged.
Configuration
No configuration is required for
USA. Press configuration button
and connect to dronebeacon
WLAN network. Point your
browser to http://192.168.50.1
Charging
Charge the db120 using a USB-C
charger. Charging LED turns green
if fully charged.
Configuration
No configuration is required for
USA. Configure operator ID for EU
use.
Press configuration button and
connect to dronebeacon WLAN
network. Point your browser to
http://192.168.50.1

Contact
Please contact us at
[e-mail] or by phone:
[phone], if you need more
information.
manual
https://download.bluemark.io/db120.pdf