BOERPLAY PSTE115.020 User manual

Multi-play equipment
PSTE115.020
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
B
Palenwoud
Adventure Play
24-8-2023
Hoofdafmetingen Main dimensions
0,00 m
0,60 m
0,00 m
1,45 m
3,05 m
0,00 m 1,55 m 2,17 m 3,11 m 4,60 m 4,99 m 5,74 m 6,68 m 8,57 m 9,09 m
0,00 m
0,91 m
2,10 m
3,25 m
6,00 m
7,51 m
7,78 m
8,08 m
Afstand > 0,25 mm door prop
(Distance > 0,25 mm by gag)
0,54 m (6x)
✔
x
<0,35 m <0,60 m
<0,60 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
B
Palenwoud
Adventure Play
24-8-2023
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
>1,50m
1,00m
0,50m
11,33 m
10,93 m
11,86 m
11,36 m
>1,50m
>1,50m
>1,50m
>1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
Palenwoud
Adventure Play
24-8-2023
Bodemplan Groundplan
B
Grondmarkering
Ground level marker
3,08 m 0,58 m 2,78 m 3,24 m 0,50 m
0,31 m
1,37 m
4,48 m 3,72 m 1,88 m 1,78 m
1,99 m
1,67 m
3,56 m
0,61 m
3,50 m
4,68 m
3,04 m
3,60 m
2,05 m
1,59 m
1,54 m
0,84 m
0,20m
0,75m
0,25m
1,60m
1,00m
1,84m
1,17m
1,02m
0,60 m
0,70 m
0,75 m
1,21m
0,66m
1,80m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
Palenwoud
Adventure Play
24-8-2023
Modules Modules
B
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
- Bouw en plaats toren 1 met 1,(3x) ,5,( x)6,(3x)7
3 - Plaats 0, verbind deze tussen Toren
4 - Plaats 1,verbind deze aan 0
5 - Plaats ( x)1 en 13, verbind deze aan 0
6 - Plaats ( x)4 en 11
7 - Plaats 18, verbind deze tussen 11 en 4
8 - Plaats 16 en 15, verbind deze tussen 11 en 4
9 - Plaats 14 en 17, verbind deze aan ( x)4
10 - Plaats (7x)3
11 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
1 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
- Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
Assembly sequence:
1 - Dig the holes according to the ground plan
- Assemble and place tower 1 with 1,(3x) ,5,( x)6,(3x)7
3 - Place 0, attach it to tower
4 - Place 1, attach it to 0
5 - Place ( x)1 and 13, attach it to 0
6 - Place ( x)4 and 11
7 - Place 18, attach it to between 11 and 4
8 - Place 16 and 15 attach it between 11 and 4
9 - Place 19 and 17 attach it to ( x)4
10 - Place (7x)3
11 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
1 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
- Check the dimensions of the safety area with regard to the play equipment
19
0
1
13
1
4
17
14
4
16
3
11
18
15
Typeplaatje
Identification plate
B
Balken tegen elkaar
(Beams against each other)
9
10
1
8
656
7

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
Palenwoud
Adventure Play
24-8-2023
Modules Modules
B
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Vloer 1,45
00201
MAP11
Grond frame 1,45
14002
MAP
32
Staander 1,3 m
13004MAP73
Staander 2,8 m
28004
MAP
2
4
Staander 3,0 m
30004
MAP
1
5
Staander 3,75 m 38004
MAP
2
Railing 15005
MAP
3
7
Driehoek opklimnet 1,45 m
14524
MAP
18
Handtouw
05029MAP19
Module RobinaGlijbaan 145 - 150 cm
B192002PSTMOD110
Adventure play
DriepootA071007PSTMOD111
BalansbalkGrondanker 110007PSTMODS212
Balans trioBalken
A
113007PSTMOD113
Adventure platyHandtouw 2.3 m
A10701PSTMOD114
Adventure platyHandtouw 4,0 m
A10801PSTMOD115
Adventure Play
Touw 3, meter 001023PSTMOD11
Adventure PlayVerbindingsbalk 2,8 m
024023PSTMOD
117
Adventure PlayVerbindingsbalk
025023PSTMOD118
Adventure PlayGlijpaal 3,25m 001024PSTMOD
1
19
Adventure PlayLiaanbrug 004027PSTMOD
1
20
AdventureplayBalansbalk aanbouw
002035PSTMOD121

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
Palenwoud
Adventure Play
24-8-2023
Afmetingen Dimensions
B
Voor
(Front)
Links
(Left)
0,00 m
1,45 m
2,92 m
3,05 m
0,00 m
0,60 m
0,87 m
1,69 m
1,84 m
2,00 m
2,17 m
0,00 m
0,24 m
0,49 m
0,77 m
1,68 m
1,82 m
2,10 m
2,36 m
2,82 m
0,00 m
0,79 m
2,00 m
2,81 m
3,05 m
Openingen altijd > 230 mm
(Openings always > 230 mm)
< 0,80 m
> 0,65 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 115 020
Palenwoud
Adventure Play
24-8-2023
Afmetingen Dimensions
B
Achter
(Back)
Rechts
(Right)
0,00 m
0,24 m
1,69 m
1,80 m
2,10 m
2,17 m
0,00 m
0,24 m
1,45 m
3,05 m
0,00 m
0,40 m
1,45 m
2,17 m
2,81 m
3,05 m
0,00 m
0,24 m
0,55 m
1,68 m
1,81 m
2,10 m
2,39 m
2,82 m
Opening altijd > 230 mm
(Opening always > 230 mm)

LOGBOOK
Type indication Adventure Play
Article number PSTE115.020
Product Name Multi-play equipment
Maximum fall height 1,5 m
Construction year 2023
Certificate 057719
Inspection body TUV Nederland QA BV
Ekkersrijt 4401
5692 DL Son
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain

7 Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area
8 Replacement parts can be ordered at the manufacturer with the OEM part numbers on the module drawing
Drawings can be found in the user guide
9 The impact area shall be provided with impact attenuating surface according to the specified falling height
•Up to 0,6m height of fall: no requirements regarding impact attenuation
•Turf, topsoil: suitable up to 1000mm height of fall
•Loose fill (sand, gravel, bark, woodchips): up to 3000mm height of fall Layer thickness is height
of fall / 10 +100mm, with a minimum of 300mm
•Synthetic surfaces (Rubber tiles, artificial turf, wetpour, tigermulch etc ): height of fall and layer
thickness according to the information of the supplier
10 This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7"
Improving the
foundations
(for equipment without concrete in the standard
foundation)
If the impact area is loose fill (sand, gravel, bark,
woodchip, etc ), or if the soil itself does not add to
stability of the equipment (i e sand, pumice, peat soil)
pour 50l of concrete per post
For instance:
Square: 0,6 x 0,6 x 0,16m
Round: ø0,35 x 0,5m
Round: ø0,50 x 0,2m

© Copyright BOERplay 14-2-2023 Revision: MAP 01 002
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
M12, L= 260, RVS A2-70
Draadeind+borgm.+ringen+dop
260M12SETMR61
30x30x14
Afstandsbus
001003PSTKST62
Vloer 1,45
A
009063PSTSHO
1
3
3
1
2

© Copyright BOERplay 18-7-2022 Revision: MAP 02 140
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
M10 X 80HOUTDRAADBOUT 080010022BSV41
M10 x 30 - VZ 8.8Carrosserierin 030010035BSV
4
2
Len te = 1400
Standaard plank 120x20
140211PSTOHO
1
3
1
2
3

© Copyright BOERplay 8-6-2023 Revision: MAP 04 130
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Zaaglengte = 1,3Robinia Ø 14-16
915PSTOHO
11
1

Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Lengte =2800
Paal 14-16
028160PSTOHO
11
© Copyright BOERplay 17-1-2023 Revision: MAP 04 280
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
1

Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Zaaglengte 3,0 mRobinia Ø 14-16
804PSTOHO
11
© Copyright BOERplay 11-8-2022 Revision: MAP 04 300
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
1 /1
1

Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Zaaglengte 3,75Robinia 14-16
806PSTOHO
11
© Copyright BOERplay 18-7-2022 Revision: MAP 04 380
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
1

© Copyright BOERplay 18-7-2022 Revision: MAP 05 150
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type
#
Nr.
M12, L= 220, RVS A2-70
Draadeind+borgm.+ringen+dop
220M12SET
BMR
2
1
Leng e =1500
Paal 10-12
015120PSTOHO
1
2
2
1