
Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
BOER
SPEELTOESTELLEN
Montage
Mounting
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
- Bouw toren 1 op uit de onderdelen 1, 4x 3, 13, 18 en 7
3 - Bouw toren op uit de onderdelen 1, , x 3, 4 en 8
4 - Bouw toren 3 op uit de onderdelen 1, 6x 3, 16 en 37
5 - Bouw toren 4 op uit de onderdelen 1, x 3, 4, 1 , 5 en 9
6 - Bouw toren 5 op uit de onderdelen 1, , x 3, 6 en
7 - Bouw toren 6 op uit de onderdelen 1, , 4x 3, 10, 8 en 33
8 - Bouw toren 7 op uit de onderdelen 1, 5x 3, 1,38 en 45
9 - Bouw toren 8 op uit de onderdelen 1, 6x 3 en 35
10 - Bouw toren 9 op uit de onderdelen 1, x 4, 6, 19, 3 en 39
11 - Bouw toren 10 op uit de onderdelen 1, , x 3, 6, 9, 10 en 11
1 - Bouw toren 11 op uit de onderdelen 1, x , 9, 17 en 40
13 - Bouw toren 1 op uit de onderdelen 1, , 3x 3, 4, 0 en 4
14 - Plaats toren 1
15 - Plaats toren
16 - Verbind toren met toren 1 via 5
17 - Verbind 43 en 44 aan 5
18 - Plaats toren 3
19 - Verbind toren 3 met toren via 34
0 - Plaats toren 4
1 - Verbind toren 4 met toren 3 via 6
- Plaats toren 5
3 - Verbind toren 5 met toren 4 via 5
4 - Plaats 7 recht onder 5 en sluit 15 aan
5 - Plaats toren 6
6 - Verbind toren 6 met toren 5 via 30
7 - Plaats toren 8
8 - Verbind toren 8 met toren 5 via 36
9 - Plaats toren 7
30 - Verbind toren 7 met toren 8 via 31
31 - Plaats toren 11
3 - Verbind toren 11 met toren 8 via 5
33 - Verbind 3 met 5
34 - Plaats toren 1
35 - Verbind toren 1 met toren 11 via 6
36 - Verbind 4 op goede hoogte met toren 1
37 - Plaats toren 9
38 - Verbind toren 9 met toren 11 via 5
39 - Verbind 14 onder 5
40 - Plaats toren 10
41 - Verbind toren 10 met toren 9 via 5
4 - Verbind 41 aan 5
43 - Verbind toren 9 met toren 3 via 36
44 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
45 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
- Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
- Build a tower type 1 of components 1, 4x 3, 13, 18 and 7
3 - Build a tower type of components 1, , x 3, 4 and 8
4 - Build a tower type 3 of components 1, 6x 3, 16 and 37
5 - Build a tower type 4 of components 1, x 3, 4, 1 , 5 and 9
6 - Build a tower type 5 of components 1, , x 3, 6 and
7 - Build a tower type 6 of components 1, , 4x 3, 10, 8 and 33
8 - Build a tower type 7 of components 1, 5x 3, 1,38 and 45
9 - Build a tower type 8 of components 1, 6x 3 and 35
10 - Build a tower type 9 of components 1, x 4, 6, 19, 3 and 39
11 - Build a tower type 10 of components 1, , x 3, 6, 9, 10 and 11
1 - Build a tower type 11 of components 1, x , 9, 17 and 40
13 - Build a tower type 1 of components 1, , 3x 3, 4, 0 and 4
14 - Place tower 1
15 - Place tower
16 - Attach tower to tower 1 using 5
17 - Connect 43 and 44 to 5
18 - Place tower 3
19 - Attach tower 3 to tower using 34
0 - Place tower 4
1 - Attach tower 4 to tower 3 using 6
- Place tower 5
3 - Attach tower 5 to tower 4 using 5
4 - Place 7 right under 5 and connect 15
5 - Place tower 6
6 - Attach tower 6 to tower 5 using 30
7 - Place tower 8
8 - Attach tower 8 to tower 5 using 36
9 - Place tower 7
30 - Attach tower 7 to tower 8 using 31
31 - Place tower 11
3 - Attach tower 11 to tower 8 using 5
33 - Connect 3 to 5
34 - Place tower 1
35 - Attach tower 1 to tower 11 using 6
36 - Connect 4 at the right height to tower 1
37 - Place tower 9
38 - Attach tower 9 to tower 11 using 5
39 - Connect 14 under 5
40 - Place tower 10
41 - Attach tower 10 to tower 9 using 5
4 - Connect 41 to 5
43 - Attach tower 9 to tower 3 using 36
44 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
45 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
- Check the dimensions of the safety area with regard to the play equipment