
© Copyright BOERplay Revision:
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
Pasvloer 0,59 en 0,95 m
00401MAP11
Adventure PlayGrote vloer met mangat
00701MAP12
Grond frame 1,45
14002
MAP5
3
Staander 3,3 m
33004
MAP14
Staander 3,75 m
38004
MAP55
= 1,3 m Railing
13005
MAP
26
Adventure PlayWandje 0,70 m
00106
MAP
2
7
Adventure PlayWandje 1,0 m easy
00206MAP28
Adventure PlayWandje 0,70 m
00806MAP19
Poort 1,95 m 00906MAP110
Wand 1,95 m
01006
MAP111
= 1,1 m
Railing
11007
MAP1
12
Klimwand 1,45 m vloer
14520MAP113
SchorsgeschiktKlimtouw trio
19533MAP114
Module RobinaGlijbaan 195 cm
A193002PSTMOD115
Adventure PlayGlijpaal 3,2 m
002024PSTMOD
1
16
Adventure Playadder1,95 m
001
757
PSTMOD
117
Geleverde modules:
Zie tabel
Montageinstructie:
De hoofdmaten geven de maten van de staanders en vloeren aan
De detailtekeningen geven specifiek de maten van de
verbindingen aan
1 Graaf de gaten volgens het bodemplan
2 Bouw en plaats toren met 2, (5x)3 en (5x) 5
3 Plaats 4
4 Plaats 1, verbind deze aan 4 en (2x) 5
5 Plaats 17, verbind deze aan 2
6 Plaats (2x)7 en (2x) 8, verbind deze aan (2x) 5
7 Plaats 10 en 11, verbind deze aan (2x) 5
8 Plaats 13 en 15, verbind deze aan 2
9 Plaats (2x) 6, verbind deze aan 4 en 5
10 Plaats 9, verbind deze aan 2 en 5
11 Controleer of het toestel voldoet aan de
afmetingen zoals op blad 'afmetingen'
12 Dicht de gaten en verdicht het zand
Controles:
1 Correcte opbouw en alle bevestigingsmiddelen
2 Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
The main dimensions indicate the dimensions of the posts and floors
The detailed dimensions show the specific dimensions
of the connections
1 Dig the holes according to the ground plan
2 Assemble and place tower with 2, (5x)3 and (5x)5
3 Place 4
4 Place 17, attach it to 4 and(2x)5
5 Place 1, attach it to 2
6 Place (2x)7 and (2x)8, attach it to (2x)5
7 Place 10 and 11, attach it to (2x)5
8 Place 13 and 15, attach it to 2
9 Place (2x)6, attach it to 4 and 5
10 Place 9, attach it to 2 and 5
11 Check that the equipment conforms to the dimensions
shown on sheet 'dimensions'
12 Close the holes and compact the sand
Checks:
1 Correct assembly and all the fasteners
2 Check the dimensions of the safety area with
regard to the play equipment