Bonsaii Pj8003 User manual

Warranty Card

Simple Troubleshooting

Customer's name：

Mr./Miss

Contact phone：

Customer's address：

Model(S/N)：

Stores address：

Date of purchase：

STATEMENT

The projector is product grade A,in living Environment,the

projector may cause wireless disturbance,maybe users should do

something effective to avoid the disturbance.

Multi-Screen

PJ8003

QUICK GUIDE

Warning

Tips

High brightness lamp!

Avoid staring or directly looking at

the light,especially for children.

1.Please wash the anti-dust mesh once a month in order

to protect your projector!

2.Before using this machine,please remove the protective

membrane from the top & bottom cover.

This <GUIDE>offer basic operation,please read the details in<Electronic-directions>from projector

software application;

Please read this<GUIDE>carefully before use;

The company reserves the right of final interpretation;

Appearance of the product and the UI please please prevail;

If product technology or software will upgrade, without prior notice.

Projector

Faults Troubleshooting

1. Check if choose the correct mode

2. The screen jammed because the distance is too big.

3. Is the mobile connect projector SSID wifi

If the signal source channel is selected correctly, please

refer to the signal input port of the projector

Check whether the power cord is plugged in place and

switch is on

Check the mobile and wifi connection

Screen interaction

not work

No signal

The Indicator light

is on but can not

open projector

Can not play online

Check whether the power cord is plugged in place

and the switch is on

Power failure

7Maintenance and Simple Troubleshooting of

Projector

6Wirecast5Multi-screen for iPhone

1 System requirements Step 1: Select “ Wirecast” and press “OK” to enter Wirecast interface.

IPhone: Click “Allow”or “OK” to start multi-screen sharing.

Android Mobile: When using the mobile phone for the first time, the following

interface will be called up to install "byteflymirror" according to the prompts.

Interact with the screen.

2 Airplay for iPhone

Step 1: Open setting menu of the phone, turn on WiFi, and connect to a certain

WiFi SSID.

Step 2: Connect the projector to the same WiFi SSID which is connected by the

phone. Enter “setting”, select “Network Setup”, Search for the same WiFi

SSID and connect it.

Step 3: Select “Airplay” and press “OK” to enter IOS wireless connection interface.

Step 4: Slide from the bottom of iPhone, click on Air-Play Mirroring, and select

the SSID to connect for multi-screen sharing.

Warm Tips: When connected to projector via Android phone, no matter with or

without USB Cable , there will be no sound from projector, sound will be only

from Android phone. Please refer to Point 5 - 5.EZMirror( Screen Mirroring

Interactive for Android mobile phone) in user manual if you want the sound

directly from the projector. Thank you!

Smart projector is a high-tech product integrating precision optics, electronics

and machinery. The improper maintenance of the projector during the daily use

will affect its service life and effects.

For the maintenance, important attention shall be paid to:

1. Dust prevention: Excessive dust will affect the heat dissipation of the projector

due to environmental impact. It is suggested to clean its dust filter for one and

half months according to the actual environment.

2.Ventilation: As the projector integrates the sound & photo-electricity, the optical

source will produce heat during its operation. Therefore, during the installation

and use, it shall be ensured that no objects around will block the air inlet and

outlet of the projector as the heat dissipation depends on cold air convection to

improve it working stability and service life.

3.Lens maintenance: Lens, as the core component of the projector, is directly

related to the picture definition and effect. The excessive dust thereon will

affect image quality. The dirty lens shall be wiped with soft cotton cloth for the

glass lens surface. Hard cloth or abrasives shall not be used.

4.Cleaning: Excessive dust on the projector surface shall be cleaned in a timely

manner, as it will affect the heat dissipation.

5.Moisture protection: The projector is vulnerable to the damp air. Its operating

humidity is about 45%-60%. The too damp air will affect its working stability.

6.Vibration prevention: The projector shall be strictly protected from strong

impact, extrusion and vibration. Try not to move and knock the projector

during its normal operation, which will cause the internal circuit faults.

7.The projector shall not be installed on the unstable, shaking and uneven desk.

8.The container with liquid shall not be placed on the projector.

9.The power shall be switched off or the power cord shall be unplugged when

not in use.

ios ios 7 and above

All iPhone model after iPhone 4

All iPad model after iPad2

All iPod touch after iPod touch 4th generation

iPhone: 480*320~1136*640

iPad: 1024*768~2048*1536

At least 40MB free space needed

Device

Resolution Supported

Storage

Step 2: Connect the phone to the projector with a data cable.

Please visit www.bonsaiishop.com

to register for your warranty.

PJ8003

www.bonsaiishop.com

NOTICE1The projector and remote control2

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from

hard light of the projector when it’s working.

2. Do not block the air outlet, to avoid damage from

internal electronic device by projector can not cooling.

3. Do not use chemicals, cleaner or water to clean, and

also avoid rain, moisture and leucocratic liquid to

corrode circuit board.

4. Please put the projector and accessories on the place

that children can not reach.

5. Please make sure the projector working environment

is dry and windy.

6. Do not place projector in too warm or too cold room,

the high temperature or low temperature will shorten

lifespan of the device. The working environment would

be 5℃~35℃better.

7. Do not put the projector in heating equipment(drying

machine, microwave oven)to make it dry.

8. Do not press hard or put something heavy on the

projector, it will damage projector.

9. Do not throw, beat, shake projector, it will damage

circuit board in it.

10. Do not dismounting projector. Please contact after-sales

service if you have any problem.

11. Do not fix by yourself. If projector can not working

normaly, please consult with after-sales service or

depot repair.

HDMI

OUT 5V

VGA

1. Power

2. Arrow Keys

3. Confirm

4. Menu Button

5. Signal Source

6. Back

7. Lens Focussing

8. Keystone Correction

9. Media Card

10. Video HD Input

11. Audio, Video Input

12. Earphone/3.5mm AUDIO OUT

13. 5V Output

14. Media Input/Multi-screen interface.

15. VGA Input

16. Lens

17.Power Input(110-240V)

Note:

please refer to the product appearance,

this figure is for reference only.

HDMI AV

OUT 5V

VGA

①②③

1. Getting Started

1.1 Projector connect to power by the power line together with the projector.

1.2 According to the front of the projector or the remote control power supply button,

start the projector, indicator light becomes green, The projector is working

2. Power on/Power off

Press the “power ”button on the top of the projector, or the button on the remote

control, to turn on or off the projector.

3. Startup interface

After power on, the boot screen appear, like the picture.

5 Image focus

Let projector be perpendicular to wall, with the Focusing button to make the

picture clear. When focusing, you can broadcasting programs to help you finsh

focus.

7. Network Multimedia Connect

7.1 Insert the removable storage, Media cards in thecorresponding interface.

7.2 According to the broadcast programs to choose:” photos” ”music” ”movie”.

7.3 Choose the file you want to play, press the key”play pause”to play or pause the file.

8. signal source selection

8.1 You can select the signal from the homepage.

8.2 Press the projector front or the remote controlsignal source key "S", enter the

signal sourcemenu interface. Use the direction key and theconfirmation key to

select the signal source.

9. AV video equipment connecting

9.1 Use the 3in 1video tieline comes with projector

to connect with AV.

9.2 Choose the media signal channel :”AV”.

10. HDMI device connection

10.1 HDMI interface can be connected to the HDMI

output interface equipment.

10.2 Select the corresponding signal channel: "HDMI".

11. 3.5mm audio equipment connecting

Support 3.5mm earphones and other cable

soundequipment.

12. other connections

Could charge the mobile phone and ipad by 5V

power.

1 System requirements

2.2 Device connection

Step 1: Select “Miracast” and press “OK” to ente miracast interface.

Step 2: Find Multi-screen/Miracast setting/software on the phone, select and connect

to the Projector name shown on the projector interface. Then your phone

content will be mirrored to big screen by the projector. (Note: Miracast setting

and display name will differ for different phones, such as Multi-screen and

Wireless Display. Pls refer to your phone for details.)

Phone

Resolution

Storage

Android 4.2 model with 1GB RAM

WVGA~1080P

At least 40MB free space needed

6. Connecting

(2)Dial the keystone button left and right to

adjust the picture to the quadrangle as

shown in ②to finish the vertical keystone

correction.

Note: Please refer to the product appearance, this figure is for

reference only.

Note: Please refer to the product

appearance, this figure is for

reference only.

Projector Operation 4Multi-screen for Android phone

4. Keystone Correction

Focusing

Keystone Correction

4.1 Vertical keystone correction

(1)The vertical keystone correction is

required when ①and ③below appear

during the first installation and use.

4.2 Horizontal keystone correction

Please refer tothe

picture. It isnormal

if the project is

slightly oblique.

If the picture is

bigin the right and

small in the left,

slightly swing the

project to the left to

correct the picture.

If the picture is

bigin the left and

small in the right,

slightly swing the

project to theright

to correct the

picture.

Power

Arrow

button

VOL-

Source

VOL+

Mute

Black

Play Pause

button

All-round

menu key

Only suitable for

Android projector

NOTICE1The projector and remote control2

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from

hard light of the projector when it’s working.

2. Do not block the air outlet, to avoid damage from

internal electronic device by projector can not cooling.

3. Do not use chemicals, cleaner or water to clean, and

also avoid rain, moisture and leucocratic liquid to

corrode circuit board.

4. Please put the projector and accessories on the place

that children can not reach.

5. Please make sure the projector working environment

is dry and windy.

6. Do not place projector in too warm or too cold room,

the high temperature or low temperature will shorten

lifespan of the device. The working environment would

be 5℃~35℃better.

7. Do not put the projector in heating equipment(drying

machine, microwave oven)to make it dry.

8. Do not press hard or put something heavy on the

projector, it will damage projector.

9. Do not throw, beat, shake projector, it will damage

circuit board in it.

10. Do not dismounting projector. Please contact after-sales

service if you have any problem.

11. Do not fix by yourself. If projector can not working

normaly, please consult with after-sales service or

depot repair.

HDMI

OUT 5V

VGA

1. Power

2. Arrow Keys

3. Confirm

4. Menu Button

5. Signal Source

6. Back

7. Lens Focussing

8. Keystone Correction

9. Media Card

10. Video HD Input

11. Audio, Video Input

12. Earphone/3.5mm AUDIO OUT

13. 5V Output

14. Media Input/Multi-screen interface.

15. VGA Input

16. Lens

17.Power Input(110-240V)

Note:

please refer to the product appearance,

this figure is for reference only.

HDMI AV

OUT 5V

VGA

①②③

1. Getting Started

1.1 Projector connect to power by the power line together with the projector.

1.2 According to the front of the projector or the remote control power supply button,

start the projector, indicator light becomes green, The projector is working

2. Power on/Power off

Press the “power ”button on the top of the projector, or the button on the remote

control, to turn on or off the projector.

3. Startup interface

After power on, the boot screen appear, like the picture.

5 Image focus

Let projector be perpendicular to wall, with the Focusing button to make the

picture clear. When focusing, you can broadcasting programs to help you finsh

focus.

7. Network Multimedia Connect

7.1 Insert the removable storage, Media cards in thecorresponding interface.

7.2 According to the broadcast programs to choose:” photos” ”music” ”movie”.

7.3 Choose the file you want to play, press the key”play pause”to play or pause the file.

8. signal source selection

8.1 You can select the signal from the homepage.

8.2 Press the projector front or the remote controlsignal source key "S", enter the

signal sourcemenu interface. Use the direction key and theconfirmation key to

select the signal source.

9. AV video equipment connecting

9.1 Use the 3in 1video tieline comes with projector

to connect with AV.

9.2 Choose the media signal channel :”AV”.

10. HDMI device connection

10.1 HDMI interface can be connected to the HDMI

output interface equipment.

10.2 Select the corresponding signal channel: "HDMI".

11. 3.5mm audio equipment connecting

Support 3.5mm earphones and other cable

soundequipment.

12. other connections

Could charge the mobile phone and ipad by 5V

power.

1 System requirements

2.2 Device connection

Step 1: Select “Miracast” and press “OK” to ente miracast interface.

Step 2: Find Multi-screen/Miracast setting/software on the phone, select and connect

to the Projector name shown on the projector interface. Then your phone

content will be mirrored to big screen by the projector. (Note: Miracast setting

and display name will differ for different phones, such as Multi-screen and

Wireless Display. Pls refer to your phone for details.)

Phone

Resolution

Storage

Android 4.2 model with 1GB RAM

WVGA~1080P

At least 40MB free space needed

6. Connecting

(2)Dial the keystone button left and right to

adjust the picture to the quadrangle as

shown in ②to finish the vertical keystone

correction.

Note: Please refer to the product appearance, this figure is for

reference only.

Note: Please refer to the product

appearance, this figure is for

reference only.

Projector Operation 4Multi-screen for Android phone

4. Keystone Correction

Focusing

Keystone Correction

4.1 Vertical keystone correction

(1)The vertical keystone correction is

required when ①and ③below appear

during the first installation and use.

4.2 Horizontal keystone correction

Please refer tothe

picture. It isnormal

if the project is

slightly oblique.

If the picture is

bigin the right and

small in the left,

slightly swing the

project to the left to

correct the picture.

If the picture is

bigin the left and

small in the right,

slightly swing the

project to theright

to correct the

picture.

Power

Arrow

button

VOL-

Source

VOL+

Mute

Black

Play Pause

button

All-round

menu key

Only suitable for

Android projector

NOTICE1The projector and remote control2

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from

hard light of the projector when it’s working.

2. Do not block the air outlet, to avoid damage from

internal electronic device by projector can not cooling.

3. Do not use chemicals, cleaner or water to clean, and

also avoid rain, moisture and leucocratic liquid to

corrode circuit board.

4. Please put the projector and accessories on the place

that children can not reach.

5. Please make sure the projector working environment

is dry and windy.

6. Do not place projector in too warm or too cold room,

the high temperature or low temperature will shorten

lifespan of the device. The working environment would

be 5℃~35℃better.

7. Do not put the projector in heating equipment(drying

machine, microwave oven)to make it dry.

8. Do not press hard or put something heavy on the

projector, it will damage projector.

9. Do not throw, beat, shake projector, it will damage

circuit board in it.

10. Do not dismounting projector. Please contact after-sales

service if you have any problem.

11. Do not fix by yourself. If projector can not working

normaly, please consult with after-sales service or

depot repair.

HDMI

OUT 5V

VGA

1. Power

2. Arrow Keys

3. Confirm

4. Menu Button

5. Signal Source

6. Back

7. Lens Focussing

8. Keystone Correction

9. Media Card

10. Video HD Input

11. Audio, Video Input

12. Earphone/3.5mm AUDIO OUT

13. 5V Output

14. Media Input/Multi-screen interface.

15. VGA Input

16. Lens

17.Power Input(110-240V)

Note:

please refer to the product appearance,

this figure is for reference only.

HDMI AV

OUT 5V

VGA

①②③

1. Getting Started

1.1 Projector connect to power by the power line together with the projector.

1.2 According to the front of the projector or the remote control power supply button,

start the projector, indicator light becomes green, The projector is working

2. Power on/Power off

Press the “power ”button on the top of the projector, or the button on the remote

control, to turn on or off the projector.

3. Startup interface

After power on, the boot screen appear, like the picture.

5 Image focus

Let projector be perpendicular to wall, with the Focusing button to make the

picture clear. When focusing, you can broadcasting programs to help you finsh

focus.

7. Network Multimedia Connect

7.1 Insert the removable storage, Media cards in thecorresponding interface.

7.2 According to the broadcast programs to choose:” photos” ”music” ”movie”.

7.3 Choose the file you want to play, press the key”play pause”to play or pause the file.

8. signal source selection

8.1 You can select the signal from the homepage.

8.2 Press the projector front or the remote controlsignal source key "S", enter the

signal sourcemenu interface. Use the direction key and theconfirmation key to

select the signal source.

9. AV video equipment connecting

9.1 Use the 3in 1video tieline comes with projector

to connect with AV.

9.2 Choose the media signal channel :”AV”.

10. HDMI device connection

10.1 HDMI interface can be connected to the HDMI

output interface equipment.

10.2 Select the corresponding signal channel: "HDMI".

11. 3.5mm audio equipment connecting

Support 3.5mm earphones and other cable

soundequipment.

12. other connections

Could charge the mobile phone and ipad by 5V

power.

1 System requirements

2.2 Device connection

Step 1: Select “Miracast” and press “OK” to ente miracast interface.

Step 2: Find Multi-screen/Miracast setting/software on the phone, select and connect

to the Projector name shown on the projector interface. Then your phone

content will be mirrored to big screen by the projector. (Note: Miracast setting

and display name will differ for different phones, such as Multi-screen and

Wireless Display. Pls refer to your phone for details.)

Phone

Resolution

Storage

Android 4.2 model with 1GB RAM

WVGA~1080P

At least 40MB free space needed

6. Connecting

(2)Dial the keystone button left and right to

adjust the picture to the quadrangle as

shown in ②to finish the vertical keystone

correction.

Note: Please refer to the product appearance, this figure is for

reference only.

Note: Please refer to the product

appearance, this figure is for

reference only.

Projector Operation 4Multi-screen for Android phone

4. Keystone Correction

Focusing

Keystone Correction

4.1 Vertical keystone correction

(1)The vertical keystone correction is

required when ①and ③below appear

during the first installation and use.

4.2 Horizontal keystone correction

Please refer tothe

picture. It isnormal

if the project is

slightly oblique.

If the picture is

bigin the right and

small in the left,

slightly swing the

project to the left to

correct the picture.

If the picture is

bigin the left and

small in the right,

slightly swing the

project to theright

to correct the

picture.

Power

Arrow

button

VOL-

Source

VOL+

Mute

Black

Play Pause

button

All-round

menu key

Only suitable for

Android projector

NOTICE1The projector and remote control2

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from

hard light of the projector when it’s working.

2. Do not block the air outlet, to avoid damage from

internal electronic device by projector can not cooling.

3. Do not use chemicals, cleaner or water to clean, and

also avoid rain, moisture and leucocratic liquid to

corrode circuit board.

4. Please put the projector and accessories on the place

that children can not reach.

5. Please make sure the projector working environment

is dry and windy.

6. Do not place projector in too warm or too cold room,

the high temperature or low temperature will shorten

lifespan of the device. The working environment would

be 5℃~35℃better.

7. Do not put the projector in heating equipment(drying

machine, microwave oven)to make it dry.

8. Do not press hard or put something heavy on the

projector, it will damage projector.

9. Do not throw, beat, shake projector, it will damage

circuit board in it.

10. Do not dismounting projector. Please contact after-sales

service if you have any problem.

11. Do not fix by yourself. If projector can not working

normaly, please consult with after-sales service or

depot repair.

HDMI

OUT 5V

VGA

1. Power

2. Arrow Keys

3. Confirm

4. Menu Button

5. Signal Source

6. Back

7. Lens Focussing

8. Keystone Correction

9. Media Card

10. Video HD Input

11. Audio, Video Input

12. Earphone/3.5mm AUDIO OUT

13. 5V Output

14. Media Input/Multi-screen interface.

15. VGA Input

16. Lens

17.Power Input(110-240V)

Note:

please refer to the product appearance,

this figure is for reference only.

HDMI AV

OUT 5V

VGA

①②③

1. Getting Started

1.1 Projector connect to power by the power line together with the projector.

1.2 According to the front of the projector or the remote control power supply button,

start the projector, indicator light becomes green, The projector is working

2. Power on/Power off

Press the “power ”button on the top of the projector, or the button on the remote

control, to turn on or off the projector.

3. Startup interface

After power on, the boot screen appear, like the picture.

5 Image focus

Let projector be perpendicular to wall, with the Focusing button to make the

picture clear. When focusing, you can broadcasting programs to help you finsh

focus.

7. Network Multimedia Connect

7.1 Insert the removable storage, Media cards in thecorresponding interface.

7.2 According to the broadcast programs to choose:” photos” ”music” ”movie”.

7.3 Choose the file you want to play, press the key”play pause”to play or pause the file.

8. signal source selection

8.1 You can select the signal from the homepage.

8.2 Press the projector front or the remote controlsignal source key "S", enter the

signal sourcemenu interface. Use the direction key and theconfirmation key to

select the signal source.

9. AV video equipment connecting

9.1 Use the 3in 1video tieline comes with projector

to connect with AV.

9.2 Choose the media signal channel :”AV”.

10. HDMI device connection

10.1 HDMI interface can be connected to the HDMI

output interface equipment.

10.2 Select the corresponding signal channel: "HDMI".

11. 3.5mm audio equipment connecting

Support 3.5mm earphones and other cable

soundequipment.

12. other connections

Could charge the mobile phone and ipad by 5V

power.

1 System requirements

2.2 Device connection

Step 1: Select “Miracast” and press “OK” to ente miracast interface.

Step 2: Find Multi-screen/Miracast setting/software on the phone, select and connect

to the Projector name shown on the projector interface. Then your phone

content will be mirrored to big screen by the projector. (Note: Miracast setting

and display name will differ for different phones, such as Multi-screen and

Wireless Display. Pls refer to your phone for details.)

Phone

Resolution

Storage

Android 4.2 model with 1GB RAM

WVGA~1080P

At least 40MB free space needed

6. Connecting

(2)Dial the keystone button left and right to

adjust the picture to the quadrangle as

shown in ②to finish the vertical keystone

correction.

Note: Please refer to the product appearance, this figure is for

reference only.

Note: Please refer to the product

appearance, this figure is for

reference only.

Projector Operation 4Multi-screen for Android phone

4. Keystone Correction

Focusing

Keystone Correction

4.1 Vertical keystone correction

(1)The vertical keystone correction is

required when ①and ③below appear

during the first installation and use.

4.2 Horizontal keystone correction

Please refer tothe

picture. It isnormal

if the project is

slightly oblique.

If the picture is

bigin the right and

small in the left,

slightly swing the

project to the left to

correct the picture.

If the picture is

bigin the left and

small in the right,

slightly swing the

project to theright

to correct the

picture.

Power

Arrow

button

VOL-

Source

VOL+

Mute

Black

Play Pause

button

All-round

menu key

Only suitable for

Android projector

NOTICE1The projector and remote control2

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from

hard light of the projector when it’s working.

2. Do not block the air outlet, to avoid damage from

internal electronic device by projector can not cooling.

3. Do not use chemicals, cleaner or water to clean, and

also avoid rain, moisture and leucocratic liquid to

corrode circuit board.

4. Please put the projector and accessories on the place

that children can not reach.

5. Please make sure the projector working environment

is dry and windy.

6. Do not place projector in too warm or too cold room,

the high temperature or low temperature will shorten

lifespan of the device. The working environment would

be 5℃~35℃better.

7. Do not put the projector in heating equipment(drying

machine, microwave oven)to make it dry.

8. Do not press hard or put something heavy on the

projector, it will damage projector.

9. Do not throw, beat, shake projector, it will damage

circuit board in it.

10. Do not dismounting projector. Please contact after-sales

service if you have any problem.

11. Do not fix by yourself. If projector can not working

normaly, please consult with after-sales service or

depot repair.

HDMI

OUT 5V

VGA

1. Power

2. Arrow Keys

3. Confirm

4. Menu Button

5. Signal Source

6. Back

7. Lens Focussing

8. Keystone Correction

9. Media Card

10. Video HD Input

11. Audio, Video Input

12. Earphone/3.5mm AUDIO OUT

13. 5V Output

14. Media Input/Multi-screen interface.

15. VGA Input

16. Lens

17.Power Input(110-240V)

Note:

please refer to the product appearance,

this figure is for reference only.

HDMI AV

OUT 5V

VGA

①②③

1. Getting Started

1.1 Projector connect to power by the power line together with the projector.

1.2 According to the front of the projector or the remote control power supply button,

start the projector, indicator light becomes green, The projector is working

2. Power on/Power off

Press the “power ”button on the top of the projector, or the button on the remote

control, to turn on or off the projector.

3. Startup interface

After power on, the boot screen appear, like the picture.

5 Image focus

Let projector be perpendicular to wall, with the Focusing button to make the

picture clear. When focusing, you can broadcasting programs to help you finsh

focus.

7. Network Multimedia Connect

7.1 Insert the removable storage, Media cards in thecorresponding interface.

7.2 According to the broadcast programs to choose:” photos” ”music” ”movie”.

7.3 Choose the file you want to play, press the key”play pause”to play or pause the file.

8. signal source selection

8.1 You can select the signal from the homepage.

8.2 Press the projector front or the remote controlsignal source key "S", enter the

signal sourcemenu interface. Use the direction key and theconfirmation key to

select the signal source.

9. AV video equipment connecting

9.1 Use the 3in 1video tieline comes with projector

to connect with AV.

9.2 Choose the media signal channel :”AV”.

10. HDMI device connection

10.1 HDMI interface can be connected to the HDMI

output interface equipment.

10.2 Select the corresponding signal channel: "HDMI".

11. 3.5mm audio equipment connecting

Support 3.5mm earphones and other cable

soundequipment.

12. other connections

Could charge the mobile phone and ipad by 5V

power.

1 System requirements

2.2 Device connection

Step 1: Select “Miracast” and press “OK” to ente miracast interface.

Step 2: Find Multi-screen/Miracast setting/software on the phone, select and connect

to the Projector name shown on the projector interface. Then your phone

content will be mirrored to big screen by the projector. (Note: Miracast setting

and display name will differ for different phones, such as Multi-screen and

Wireless Display. Pls refer to your phone for details.)

Phone

Resolution

Storage

Android 4.2 model with 1GB RAM

WVGA~1080P

At least 40MB free space needed

6. Connecting

(2)Dial the keystone button left and right to

adjust the picture to the quadrangle as

shown in ②to finish the vertical keystone

correction.

Note: Please refer to the product appearance, this figure is for

reference only.

Note: Please refer to the product

appearance, this figure is for

reference only.

Projector Operation 4Multi-screen for Android phone

4. Keystone Correction

Focusing

Keystone Correction

4.1 Vertical keystone correction

(1)The vertical keystone correction is

required when ①and ③below appear

during the first installation and use.

4.2 Horizontal keystone correction

Please refer tothe

picture. It isnormal

if the project is

slightly oblique.

If the picture is

bigin the right and

small in the left,

slightly swing the

project to the left to

correct the picture.

If the picture is

bigin the left and

small in the right,

slightly swing the

project to theright

to correct the

picture.

Power

Arrow

button

VOL-

Source

VOL+

Mute

Black

Play Pause

button

All-round

menu key

Only suitable for

Android projector

NOTICE1The projector and remote control2

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from

hard light of the projector when it’s working.

2. Do not block the air outlet, to avoid damage from

internal electronic device by projector can not cooling.

3. Do not use chemicals, cleaner or water to clean, and

also avoid rain, moisture and leucocratic liquid to

corrode circuit board.

4. Please put the projector and accessories on the place

that children can not reach.

5. Please make sure the projector working environment

is dry and windy.

6. Do not place projector in too warm or too cold room,

the high temperature or low temperature will shorten

lifespan of the device. The working environment would

be 5℃~35℃better.

7. Do not put the projector in heating equipment(drying

machine, microwave oven)to make it dry.

8. Do not press hard or put something heavy on the

projector, it will damage projector.

9. Do not throw, beat, shake projector, it will damage

circuit board in it.

10. Do not dismounting projector. Please contact after-sales

service if you have any problem.

11. Do not fix by yourself. If projector can not working

normaly, please consult with after-sales service or

depot repair.

HDMI

OUT 5V

VGA

1. Power

2. Arrow Keys

3. Confirm

4. Menu Button

5. Signal Source

6. Back

7. Lens Focussing

8. Keystone Correction

9. Media Card

10. Video HD Input

11. Audio, Video Input

12. Earphone/3.5mm AUDIO OUT

13. 5V Output

14. Media Input/Multi-screen interface.

15. VGA Input

16. Lens

17.Power Input(110-240V)

Note:

please refer to the product appearance,

this figure is for reference only.

HDMI AV

OUT 5V

VGA

①②③

1. Getting Started

1.1 Projector connect to power by the power line together with the projector.

1.2 According to the front of the projector or the remote control power supply button,

start the projector, indicator light becomes green, The projector is working

2. Power on/Power off

Press the “power ”button on the top of the projector, or the button on the remote

control, to turn on or off the projector.

3. Startup interface

After power on, the boot screen appear, like the picture.

5 Image focus

Let projector be perpendicular to wall, with the Focusing button to make the

picture clear. When focusing, you can broadcasting programs to help you finsh

focus.

7. Network Multimedia Connect

7.1 Insert the removable storage, Media cards in thecorresponding interface.

7.2 According to the broadcast programs to choose:” photos” ”music” ”movie”.

7.3 Choose the file you want to play, press the key”play pause”to play or pause the file.

8. signal source selection

8.1 You can select the signal from the homepage.

8.2 Press the projector front or the remote controlsignal source key "S", enter the

signal sourcemenu interface. Use the direction key and theconfirmation key to

select the signal source.

9. AV video equipment connecting

9.1 Use the 3in 1video tieline comes with projector

to connect with AV.

9.2 Choose the media signal channel :”AV”.

10. HDMI device connection

10.1 HDMI interface can be connected to the HDMI

output interface equipment.

10.2 Select the corresponding signal channel: "HDMI".

11. 3.5mm audio equipment connecting

Support 3.5mm earphones and other cable

soundequipment.

12. other connections

Could charge the mobile phone and ipad by 5V

power.

1 System requirements

2.2 Device connection

Step 1: Select “Miracast” and press “OK” to ente miracast interface.

Step 2: Find Multi-screen/Miracast setting/software on the phone, select and connect

to the Projector name shown on the projector interface. Then your phone

content will be mirrored to big screen by the projector. (Note: Miracast setting

and display name will differ for different phones, such as Multi-screen and

Wireless Display. Pls refer to your phone for details.)

Phone

Resolution

Storage

Android 4.2 model with 1GB RAM

WVGA~1080P

At least 40MB free space needed

6. Connecting

(2)Dial the keystone button left and right to

adjust the picture to the quadrangle as

shown in ②to finish the vertical keystone

correction.

Note: Please refer to the product appearance, this figure is for

reference only.

Note: Please refer to the product

appearance, this figure is for

reference only.

Projector Operation 4Multi-screen for Android phone

4. Keystone Correction

Focusing

Keystone Correction

4.1 Vertical keystone correction

(1)The vertical keystone correction is

required when ①and ③below appear

during the first installation and use.

4.2 Horizontal keystone correction

Please refer tothe

picture. It isnormal

if the project is

slightly oblique.

If the picture is

bigin the right and

small in the left,

slightly swing the

project to the left to

correct the picture.

If the picture is

bigin the left and

small in the right,

slightly swing the

project to theright

to correct the

picture.

Power

Arrow

button

VOL-

Source

VOL+

Mute

Black

Play Pause

button

All-round

menu key

Only suitable for

Android projector