Bosch WAE24369GB User manual

1 2 3 4 5 6
End of programme when ...
... $Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temper atures:
 Cool washing: Select R inse/cSpin .
 Press $Start/Reloa d.
Programmes at lower tempera tures:
Rinse/cSpin (deactivate =Aqua Plus button) o r
select >Drain.
 Press $Start/Reloa d.
Changing the programme, if ...
... you have selected the wrong programm e by mistake:
 Reselect the programme.
 Pr ess $Start/Reload. The new progr amme starts from
the beginning.
Reloading laundry, if ... apage 5
... $Start/Reload selected and then YES is lit in the
display panel. If N O is lit, the washing machine door
cannot be opened.
 Press $Start/Reloa d.
Correct installation according to the
separate Installation instructions.
Checking the machine
 Never use a damaged mac hine.
 Inform customer ser vice.
Connecting the mains plug
Make sure your hands are dry .
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the main wash, water
softener, bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's care i nformation.
According to the informat ion on the care label s.
According to type, colour, soiling and te mperature.
Do not exceed the maximum load apage 7.
Observe the important i nformation apage 6.
Insert large and small i tems of laundry.
Close the washing machine d oor. Take care not to trap items of lau ndry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardne ss (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dis penser and place in the dru m.
Your washing machine
Congratulations äYou have o pted for a modern, high- quality
domestic appliance manufacture d by Bosch. This washing machine
is distinguished by its ec onomical water and energ y consumption.
Each machine that leaves our factory has been inspected thoroughly
to ensure that it functio ns properly and is in p erfect condition.
Further information: www.bosch-hom e.com
You can find the contact details for yo ur nearest after-sales service
here or in the after-sal es service directory (depe nding on model).
GB 0844 8928979
Calls from a BT landline will be cha rged at up to 3 pence per
minute. A call set-up fee of up to 6 pence m ay apply.
IE 01450 2655
Environmentally friendly waste disposal All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Direct ive
2002/96/EEC on waste electrical and electro nic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋIntended use ....................................................................................... 1
ʋProgrammes ........................................................................................ 1
ʋSetting and adjusting the programme ........................................... 3
ʋWashing ........................................................................................... 3/4
ʋAfter washing ...................................................................................... 4
ʋIndividual settings .................................... ......................................5/6
ʋImportant information .............................. ......................................... 6
ʋOverview of programmes ................................................... .............7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋCare ................................................................................................. ....9
ʋInformation on the display pan el .................................................... 9
ʋMaintenance ... ................................................................................. 10
ʋWhat to do if... .................................................................................. 11
Protection of the environmen t/Conservation tips
 Always fill the washing machi ne with a maximum amo unt of
laundry for the relevant pr ogramme.
 Wash normally s oiled laundry without a pre-w ash.
 Instead of LCottons 90 °C, choose th e programme
LCottons 60 °C with the addi tional function ćEcoPerfect.
Comparable cleaning resu lt with significantly lower e nergy
consumption.
 Measure the detergen t according to the manufacturer's
instructions and water hardnes s.
 If the laundry is then d ried in the tumble dryer, select the s pin
speed according to t he instructions of the dryer manufacturer.
Preparation Before washing for the first time
Wash once without any laundry apage 9.
Setting** and adjusting programmes
Spin
speed*
Programme selector Start/
Reload
Programme selector for switching
the machine on and off and for
selecting the programme . Can be
turned in either direction .
Programmes
Detailed overview of prog rammes apage 7.
Spin speed can be selected individually, irrespec tive of the
selected programme and programme progress.
LCottons Hard-wearing fabrics
+7Prewash Hard-wearing fabrics,
pre-wash at 30 °C
/Mixed Load Different types of laundry
@SuperQuick 15 Short programme
2Rinse/cSpin Laundry washed by han d,
=Aqua Plus button activa ted; if only
using the spin cycle, dea ctivate the
button
>Drain Drain rinsing wa ter for Rinse Hold
(without final spin)
:/ /÷Wool Hand/machine-washa ble wool
Delicate/Silk Delicate washable fabrics
IEasy-Care Easy-care fabrics
**If the (symbol flashes in the
display panel, the childpro of lock
is active adeactivate, page 5.
Additional functions, the option s
button and spin speeds
aIndividual settings, page 5.
$Start/Reload
Washing
1
2
Washing
Detergent drawer with
compartments I,II,~Washing machine
door
Compartment 0: Fabric softener, starch
Compartment I: Detergent fo r pre-wash
ʋfor domestic use only,
ʋfor washing machine -washable fabrics and hand-wash-
able wool in detergent solution ,
ʋto be operated with cold drinking water and commer-
cially available detergents and ca re products which are
suitable for use in washing m achines.
.
 D o not leave children un attended near the
washing machine.
 T he washing machine is not to be used by
children or persons no t familiar with the
operating instructions.
 K eep pets away from th e washing machine.
Read these instructions and t he separate
installation instructions before opera ting the
washing machine.
Dilute viscous fabric softener and fabric conditioner with wa ter.
This prevents blockages.
Individual settings
ʑReady in options button
When you select the programm e, the relevant programme duration is displayed. You c an
delay the start of the programme be fore it begins. The Ready in- time c an be set in
increments of one hour up to a maximum of 24 hours. Press the Rea dy in button
repeatedly until the required number of ho urs is displayed (h = hour). Choose $Start/
Reload. It is not possible to make adjustments once the programme has started.
ʑcSpin / without final spin
Before and while the selected pro gramme is running, you can set the spin speed or Rinse
Hold (without final spin, laundry s oaks in the last rins ing water, display panel - - -). The effects
depend on the programme progress. The maximum se lectable spin speed depends on the
model and on which progr amme is currently selected.
ʑAdditional functions aand overview of p rogrammes, see pag e 7.
ĈSpeedPerfect For washing in a shorter time with a washing outc ome comparable to
that of the standard programme. Ma ximum load aOverview of
programmes, page 7.
ćEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
SReduced Ironing Special spin sequence with s ubsequent fluffing. More gentle final spin
- residual moisture in th e laundry slightly increased.
=Aqua Plus Increased water level and ad ditional rinse cycle, extended washin g
time. For areas with very soft wa ter or for further enhancing the spin
result.
ʑChildproof lock and re loading
(Childproof lock/
Appliance lock
You can lock the washing machine to prevent the function s you have
set from being change d inadvertently.
ON /OFF: Press and hold th e $Start/Reload button for approx. 5
seconds after the start/end of the p rogramme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switc hing off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the programme has
started, choose $Start/Reload. The mac hine checks whether
reloading is possible.
YES is lit: Reloading is poss ible.
NO flashes: wait until YES lights u p.
Note: do not open the doo r until YES is lit.
NO: It is not possible to reload.
Note: For safety reasons, the w ashing machine door re mains locked
when the water level and/or te mperature is high, or during spinning .
To continue the programme, press the $Start/Relo ad.
ʑ$Start/Reload
To start the programme or to subsequently load additio nal laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundr y and the machine
 When determining the d osage of all washing powders, additives and cleaning ag ents, you
must follow the manufacturer's in structions.
 Empty pockets.
 Look out for metal ite ms (paperclips, etc.).
 Wash delica tes in a laundry bag (tig hts, curtains, underwired br as).
 Fasten zips, do up any buttons .
 Brush sand o ut of pockets and collars.
 Remove curtain fittings or place in the la undry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choo se the additional function
ĈSpeedPerfect.
Pre-treat any stains as ne cessary.
intense Do not load as much laun dry.
Choose a programme with pre-wa sh.
Soaking Load laund ry of the same colour
Pour soaking agent/deterge nt into compartment II in accord ance with the manufacturer 's
instructions. Turn the programme selector to LCottons 30 °C and press $Sta rt/Reload.
After approx. 10 minute s, press $Start/Reload to pause the programme. Once the required
soaking time has elapsed, press $Star t/Reload again to contin ue the programme, or select
a different programme .
Starching Laundry must n ot be treated with fab ric softener
Starching is possible in all w ash programmes if liquid star ch is used. Pour the starch i n
accordance with the manufacturer's instructions into fabric softener compartment ~(rinse first
if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye ma nufacturer's instructions! Do no t use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1. Activating the mode
for setting the signal
volume
Set to 1 step, the
display panel
lights up
press and hold +1 step, release
Button signals Information signals
Set to 
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times .
1200
1000
800
600
Rinse Hold
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run th rough the
setting options automatical ly.
Additional
functions
3
Drum
Control panel
Service flap
Programme sequence displays:
ü(1üü2üüChildproof lock, washing, rinsing, spinnin g
1 - 24h Programme end after
Ready in
Display panel/
Options button
Removing the washing
Open the washing mac hine door and remove the washing.
If Rinse Hold (withou t final spin) is active: Turn the
programme selector to >D rain or select the spin s peed.
Press $Start/Reload.
 Remove any foreign objects - r isk of rusting.
 Leave the washing machine door a nd detergent
drawer open so that any re sidual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop m odels aRefer to installation
instructions.
Switching off
Turn the programme selector to Off.
(*depending on the model)

7
Overview of programmes aRef er to the table of consumption v alues on page 8 and notes o n page 6.
Programmes °C max. Typeo f laundry Additional functions; information
LCottons 20, 30, 40, 60, 90 °C 7 kg/
4 kg*
Hard-wearing fabrics, heat-resi stant fabrics made of cotton or linen
ĈSpeedPerfect*, ćEcoPerfect, SReduced Ironing,
=Aqua Plus
+ Prewash 40 °C IEasy-Care 30, 40 °C
3 kg
Easy-care fabrics made of co tton, linen, synthetic fibres or blended fabrics
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing,
=Aqua Plus
/Mixed Load 40 °C Fabrics made of cotton or easy- care fabrics
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus; different types of laundry can be wa shed together
cDelicate/Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made o fs ilk,s atin, synthetic fibres or blended fabrics (e.g. curtains)
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing,
=Aqua Plus; No spin between rinse cy cles
:/ /Wool cold, 30 °C Handäor machine-washable fabr ics made of wool or
containing wool
Particularly gentle wash pr ogramme to avoid shrinkage of lau n- dry, longer programme breaks (fab rics rest in the detergent solution)
@SuperQuick 15 30 °C Easy-care fabrics made o f cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minut es, suitable for lightly soiled laundry
Additional programmes 2Rinse/cSpin , >Drain
*Reduced load for additional ĈSpeedP erfect function As a short programme, /Mixed Load 4 0 °C, with a maximum spin speed, is i deal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartmen tsIand II.
9303 / 9000880897 *880897* WAE24369GB ...
Robert Bosch Hausgeräte Gm bH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
 Read the instruction manual and installation instructions a nd all other information enclosed
with the washing machin e and act accordingly.
 Retain the docume nts for subsequent use.
Risk of electric shock  Never pull the cable to disconnect the mains plug.
 Never insert/disconnect the ma ins plug with damp hands.
Danger to life For worn-out appliances:
 Disconnect the m ains plug.
 Sever the m ains cable and discard along with the plug.
 Destroy the lock on the washing mac hine door. This will prevent
children from locking themsel ves in and risking their lives.
Danger of suffocation  Keep packagin g, film and packaging pa rts out of the reach o f
children.
Risk of poisoning  Keep dete rgents and care products out of the reach of children .
Risk of explosion  Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / clean ing solvent may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thorough ly by hand beforehand.
Risk of injury  The wa shing machine door can become v ery hot.
 Be careful when dra ining hot detergent solution.
 Do no t climb onto the washing machin e.
 Do not lean on the open washing mac hine door.
 Do no t reach into the d rum if it is s till rotating.
 Be care ful when opening the detergent drawer while the machine
is in operation.
Consumption values depending on model
Programme Load Electricity*** Water*** Programme
duration***
LCottons 20 °C 7 kg 0,32 kWh 68 l 2 ½ h
LCottons 30 °C 7 kg 0,56 kWh 68 l 2 ½ h
LCottons 40 °C* 7kg 0,9 1 kWh 68 l 2½ h
LCottons60 °C 7 kg 1,25 kWh 68 l 2 ¾ h
LCottons 90 °C 7 kg 2,16 kWh 74 l 2 ¾ h
Easy-Care 40 °C* 3 kg 0,55 kWh 54 l 1 ¾ h
/Mixed Load 40 °C 3 kg 0,45 kWh 35 l 1 ¼ h
cDelicate/Silk 30 °C 2 kg 0,24 kWh 35 l ¾ h
:/ /cWool 30 °C 2 kg 0,22 kWh 47 l ¾ h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, was h the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption
Annual water
consumption
LFCottons40/60 °C ćEcoPerfect** 3,5/7 kg 165 kWh 10686 l
** Programme setting for testing and energy labelling in accordance wi thEU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values d epending on water pressure, hardness, and inlet temperature, a mbient tem-
perature, type, amount and soiling o f the laundry, detergent used, fluctuations in the p ower supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the m achine. Turn on the tap. Add the following to compartment II:
 approx. 1 litre water
 detergent ( dosage according to the ma nufacturer's instructions for light soilin g and the appropriate degree of w ater
hardness)
Set the programme selector to LCottons 60 °C and select $Start/Reload.A t the end of the programme, turn th e
programme selector to Off.
Machine housing, control panel
 Wipe with a soft, damp cloth.
 Do no t use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
 Remove detergent and cleaning agent residue immediately.
 Do not cl ean with a jet of water.
Cleaning the deterge nt drawer and housing...
... if it contains detergent or fabric softener residues.
1. Pull the drawer out , press down the insert and fully remove the drawer from the housing.
2. To remove the in sert: press the insert upwards from below w ith your finger.
3. Clean the detergent disp enser tray and insert with water and a brush and dry it. Also remove
any detergent or fabric softener residues in the housing.
4. Attach the insert an d engage (connect the cylinder to the guide pin).
5. Push in the detergent d rawer.
Leave the detergent drawer open so that any residu alw aterc an evaporate.
Washing drum and rubber seal
Wipe the inside of the rub ber seal dry with a cloth. Leave th e washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free c leaning agent, not steel wool.
Descaling Ensure th ere is no laundry in the machine
Descale the appliance accordin g to the descaler manufacturer's instructions. This should not be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to r un when the power has been restored. However, if the laun dry has to be removed, the
washing machine door can b e opened as follows:
Risk of scalding.
The detergent solution and laundry may be h ot. If possible, leave it to cool down.
Do not reach into the dru m if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selecto r to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on mode l
F: 16 Close the washing machine door proper ly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter apage 10, Water pressu ret oo low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pum papa ge 10. Drainage hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call custom er services.
F: 23 Water in the base tub, appliance leaking. C all customer services.
Risk of electr ic shock. Disconnect the mains plug.
Risk of explosion. N o solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector toOff a ndd isconnect the mains plug.
1. Open and remove the serv ice flap.
2. For models with a draina ge hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the c ontainer.
Remove the sealing cap, a llow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Caref ully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repe at the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover threa d and pump housing (the impeller in the detergent
solution pump must r otate).
5. Replace the pump cover an d screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent fro m flowing straight into the drain during the next was h: Pour 1 litre of water into
compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector toOff and d isconnect the mains plug.
1. Loosen the hose c lamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siph on connecting piece.
3. Reattach the drainage h ose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe s afety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any p rogramme (except for 2Rinse/cSpin // >Drain).
3. Choose $Start/Reload. Let the progr amme run for approximately 40 seconds.
4. Turn the programme selecto r to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small b rush.
and/or for Standard and Aqua-Sec ure models:
Remove the hose on the rear oft he appliance,
Remove the filter with pliers an d clean.
2. Connect the hose an d check for leaks.
Risk of scalding.
Allow the detergent s olution to cool down.
 Turn o ff the tap.
11
What to do if ...
ʑWater is leaking out.  Attach/replace the drainage hose co rrectly.
 Tighten the screw conne ction of the supply hose.
ʑNo water supply.
Detergent not
dispensed.
$Start/Reload not selec ted?
 Tap not turned on?
 Filter bl ocked? Clean t he filter apage 10.
 Supply hose kink ed or trapped?
ʑWashing machine doo r
cannot be opened.
 Safety func tion active. Program me stopped? apage 4.
 Is Rinse Hold (without final spin) selected? apage 3, 4.
 Can be opened by em ergency release only? apage 9.
ʑProgramme does not
start.
$Start/Reload or Ready in time selected?
 Washing machine d oor closed?
 Childpro of lock active? Deacti vate apage 5.
ʑDetergent solution i s
not drained.
 Is Rinse Hold (without final spin) selected? apage 3, 4.
 Clean the detergent solution pump ap age 10.
 Clean the waste pip e and/or drainage h ose.
ʑWater not visible in the
drum.
 Not a fa ult - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
 N ot a fault - the unbalanced- load detection system has ca ncelled the
spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry e venly inside the drum.
SReduced Ironin g selected? apage 5 .
 Selected spee d too low? apage 5.
ʑThe programm e
duration changes
during the wash cycle.
 N ot a fault  the programme sequ ence is optimised for the p articular
wash process. This may result in cha nges to the programme duration
in the display field .
ʑSpin cycle performed
several times.
 Not a fa ult - unbalanced load detection s ystem adjusts the
imbalance.
ʑResidual water in the
compartment for c are
products.
 Not a fa ult - the action of the c are product is no t affected.
 Clean the insert if nece ssary apage 9.
ʑOdour formation in the
washing machine.
 Run pr ogramme LCottons 9 0 °C without la undry. Use standard
detergent.
ʑStatus display³1flashes. Foam ma y
be coming out of t he
detergent drawer.
 Too m uch detergent used? Mix 1 tablespo on of fabric softener with
½ litre of water and pour into dispe nser II (not for outdoor and down-
filled textiles!).
 Reduce the deterge nt dosage for the next wash cycle.
ʑIntense noise
formation, vibrations
and wandering
during the spin cyc le.
 Are the a ppliance feet fixed?
Secure the appliance feet aInstallation instruct ions.
 Transpo rtation safety device s removed? Remo ve the transportation
safety devices aI nstallation instructions.
ʑNoises during spin an d
drain cycles.
 Clean detergent-solutio n pump apage 10.
ʑDisplay panel/indica tor
lamps do not fun ction
during operation.
 Power cut?
 Fuses tr iggered? Reset/chang e the fuse.
 If the fault occurs repeatedly, call custome r services.
ʑProgramme sequence
longer than usua l.
 Not a fault - unb alanced load detection system adjusts imbalance by
repeatedly distributing the la undry.
 Not a fault - foam detection sys tem active - adds an additional rinse
cycle.
ʑDetergent residues
on the laundry.
 Occas ionally, phosphate-free detergents co ntain water-insolub le
residues.
 Select the 2Rinse/cS pin cycle or brush o ut the laundry af ter
washing.
If you cannot c orrect a fault yourself (switching on/o ff) or a repair is required:
 Turn the programme sele ctor to Off and remove the mains plug from th e socket.
 Turn of f the water supply and call customer serv ices aInstallation instru ctions.
Washing machine
en Instruction manu al

1 2 $c$c=>$$a$$Correct installation according to the
separate Installation instructions.
Checking the machine
 Never use a damaged machine.
 Inform customer service.
Connecting the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the main wash, water
softener, bleach, stain remover
aa
C
Pou
Your washing machine
Congratulations äYou have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This washing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory has been inspected thoroughly
to ensure that it functions properly and is in perfect condition.
Further information: www.bosch-home.com
You can find the contact details for your nearest after-sales service
here or in the after-sales service directory (depending on model).
GB 0844 8928979
Calls from a BT landline will be charged at up to 3 pence per
minute. A call set-up fee of up to 6 pence may apply.
IE 01450 2655
Environmentally friendly waste disposal All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Directive
2002/96/EEC on waste electrical and electronic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋIntended use .......................................................................................1
ʋProgrammes ........................................................................................1
ʋSetting and adjusting the programme ...........................................3
ʋWashing ...........................................................................................3/4
ʋAfter washing ......................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋImportant information ....................................................................... 6
ʋOverview of programmes ................................................................7
ʋSafety instructions ............................................................................. 8
ʋConsumption values .........................................................................8
ʋCare .....................................................................................................9
ʋInformation on the display panel ....................................................9
ʋMaintenance .................................................................................... 10
ʋWhat to do if... .................................................................................. 11
Protection of the environment/Conservation tips
 Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
 Wash normally soiled laundry without a pre-wash.
 Instead of LCottons 90 °C, choose the programme
LCottons 60 °C with the additional function ćEcoPerfect.
Comparable cleaning result with significantly lower energy
consumption.
 Measure the detergent according to the manufacturer's
instructions and water hardness.
 If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer manufacturer.
Preparation a
Spin
speed*
P Start/
Reload
Programmes
Detailed overview of programmes apage 7.
Spin speed can be selected individually, irrespective of the
selected programme and programme progress.
LCottons Hard-wearing fabrics
+7Prewash Hard-wearing fabrics,
pre-wash at 30 °C
/Mixed Load Different types of laundry
@SuperQuick 15 Short programme
2Rinse/cSpin Laundry washed by hand,
=Aqua Plus button activated; if only
using the spin cycle, deactivate the
button
>Drain Drain rinsing water for Rinse Hold
(without final spin)
:/ /÷Wool Hand/machine-washable wool
Delicate/Silk Delicate washable fabrics
IEasy-Care Easy-care fabrics (aa$~Compartment 0: Fabric softener, starch
Compartment I: Detergent for pre-wash
ʋfor domestic use only,
ʋfor washing machine-washable fabrics and hand-wash-
able wool in detergent solution,
ʋto be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines.
.
 Do not leave children unattended near the
washing machine.
 The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
 Keep pets away from the washing machine.
Read these instructions and the separate
installation instructions before operating the
washing machine.
ʑ$ʑcʑaĈaćS=ʑ($$$ʑ$ʑĈL$$$~
Additional
functions
Programme sequence d
ü(1üü2üüChildproof lock, washing
1 - 24h Programme end after
Ready in
Display panel/
Options button >$a
(*depending on the model)

3 4
End of programme when ...
... $Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
 Cool washing: Select Rinse/cSpin .
 Press $Start/Reload.
Programmes at lower temperatures:
Rinse/cSpin (deactivate =Aqua Plus button) or
select >Drain.
 Press $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
 Reselect the programme.
 Press $Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ... apage 5
... $Start/Reload selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
 Press $Start/Reload.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋLLćBefore washing for the first time
Wash once without any laundry apage 9.
Setting** and adjusting programmes
Programme selector
Programme selector for switching
the machine on and off and for
selecting the programme. Can be
turned in either direction.
aL7/@2c=>:/÷I**If the (symbol flashes in the
display panel, the childproof lock
is active adeactivate, page 5.
Additional functions, the options
button and spin speeds
aIndividual settings, page 5.
$Start/Reload
Washing
1
2
Washing
Detergent drawer with
compartments I,II,~Washing machine
door
0ʋʋʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ$ʑcʑaĈaćS=ʑ($$$ʑ$ʑĈL$$$~
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
3
Drum
Control panel
Service flap
nce displays:
ü(1üü2üüashing, rinsing, spinning
fter
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: Turn the
programme selector to >Drain or select the spin speed.
Press $Start/Reload.
 Remove any foreign objects - risk of rusting.
 Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models aRefer to installation
instructions.
Switching off
Turn the programme selector to Off.

56
$ay
c$c=>$$m
a$$aa
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋLLćaaL7/@2c=>:/÷I(aa$~0ʋʋʋIndividual settings
ʑReady in options button
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the Ready in button
repeatedly until the required number of hours is displayed (h = hour). Choose $Start/
Reload. It is not possible to make adjustments once the programme has started.
ʑcSpin / without final spin
Before and while the selected programme is running, you can set the spin speed or Rinse
Hold (without final spin, laundry soaks in the last rinsing water, display panel - - -). The effects
depend on the programme progress. The maximum selectable spin speed depends on the
model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, see page 7.
ĈSpeedPerfect For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load aOverview of
programmes, page 7.
ćEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
SReduced Ironing Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
=Aqua Plus Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
ʑChildproof lock and reloading
(Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON /OFF: Press and hold the $Start/Reload button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the programme has
started, choose $Start/Reload. The machine checks whether
reloading is possible.
YES is lit: Reloading is possible.
NO flashes: wait until YES lights up.
Note: do not open the door until YES is lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the $Start/Reload.
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundry and the machine
 When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
 Empty pockets.
 Look out for metal items (paperclips, etc.).
 Wash delicates in a laundry bag (tights, curtains, underwired bras).
 Fasten zips, do up any buttons.
 Brush sand out of pockets and collars.
 Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the additional function
ĈSpeedPerfect.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with pre-wash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LCottons 30 °C and press $Start/Reload.
After approx. 10 minutes, press $Start/Reload to pause the programme. Once the required
soaking time has elapsed, press $Start/Reload again to continue the programme, or select
a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment ~(rinse first
if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1. Activating the mode
for setting the signal
volume
Set to 1 step, the
display panel
lights up
press and hold +1 step, release
Button signals Information signals
Set to 
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
1200
1000
800
600
Rinse Hold
ü(1üü2üüg.
>d.
$nt
aon

7
Overview of programmes aRefer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max. Type of laundry Additional functions; information
LCottons 20, 30, 40, 60, 90 °C 7 kg/
4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen
ĈSpeedPerfect*, ćEcoPerfect, SReduced Ironing, =Aqua Plus
+ Prewash 40 °C IEasy-Care 30, 40 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus
/Mixed Load 40 °C Fabrics made of cotton or easy-care fabrics
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus; different types of laundry can be washed together
cDelicate/Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
ĈSpeedPerfect, ćEcoPerfect, SReduced Ironing, =Aqua Plus; No spin between rinse cycles
:/ /Wool cold, 30 °C Handäor machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to avoid shrinkage of laun- dry, longer programme breaks (fabrics rest in the detergent solution)
@SuperQuick 15 30 °C Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minutes, suitable for lightly soiled laundry
Additional programmes 2Rinse/cSpin , >Drain
*Reduced load for additional ĈSpeedPerfect function
As a short programme, /Mixed Load 40 °C, with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments Iand II.
9303 / 9000880897 *880897* WAE24369GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
 Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
 Retain the documents for subsequent use.
Risk of electric shock  Never pull the cable to disconnect the mains plug.
 Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
 Disconnect the mains plug.
 Sever the mains cable and discard along with the plug.
 Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation  Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning  Keep detergents and care products out of the reach of children.
Risk of explosion  Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / cleaning solvent may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury  The washing machine door can become very hot.
 Be careful when draining hot detergent solution.
 Do not climb onto the washing machine.
 Do not lean on the open washing machine door.
 Do not reach into the drum if it is still rotating.
 Be careful when opening the detergent drawer while the machine
is in operation.
Consumption values depending on model
Programme Load Electricity*** Water*** Programme
duration***
LCottons 20 °C 7 kg 0,32 kWh 68 l 2 ½ h
LCottons 30 °C 7 kg 0,56 kWh 68 l 2 ½ h
LCottons 40 °C* 7 kg 0,91 kWh 68 l 2 ½ h
LCottons60 °C 7 kg 1,25 kWh 68 l 2 ¾ h
LCottons 90 °C 7 kg 2,16 kWh 74 l 2 ¾ h
Easy-Care 40 °C* 3 kg 0,55 kWh 54 l 1 ¾ h
/Mixed Load 40 °C 3 kg 0,45 kWh 35 l 1 ¼ h
cDelicate/Silk 30 °C 2 kg 0,24 kWh 35 l ¾ h
:/ /cWool 30 °C 2 kg 0,22 kWh 47 l ¾ h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption
Annual water
consumption
LFCottons40/60 °C ćEcoPerfect** 3,5/7 kg 165 kWh 10686 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
L$aaaa
>2c>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLʑ³1ʑaaʑaʑʑʑ2ca

aLĈćS=IĈćS=/ĈćS=cĈćS=:/ä@2c>Ĉ/
LLLLL/c:/cLFć
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
 approx. 1 litre water
 detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to LCottons 60 °C and select $Start/Reload. At the end of the programme, turn the
programme selector to Off.
Machine housing, control panel
 Wipe with a soft, damp cloth.
 Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
 Remove detergent and cleaning agent residue immediately.
 Do not clean with a jet of water.
Cleaning the detergent drawer and housing...
... if it contains detergent or fabric softener residues.
1. Pull the drawer out, press down the insert and fully remove the drawer from the housing.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it. Also remove
any detergent or fabric softener residues in the housing.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Washing drum and rubber seal
Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter apage 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump apage 10. Drainage hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
Risk of electric shock. Disconnect the mains plug.
Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repeat the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into
compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for 2Rinse/cSpin // >Drain).
3. Choose $Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
 Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑaʑLʑ³1ʑaaʑaʑʑʑ2ca

aLĈćS=IĈćS=/ĈćS=cĈćS=:/ä@2c>Ĉ/
LLLLL/c:/cLFćL$aaaa>2c>$
11
What to do if ...
ʑWater is leaking out.  Attach/replace the drainage hose correctly.
 Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not
dispensed.
$Start/Reload not selected?
 Tap not turned on?
 Filter blocked? Clean the filter apage 10.
 Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
 Safety function active. Programme stopped? apage 4.
 Is Rinse Hold (without final spin) selected? apage 3, 4.
 Can be opened by emergency release only? apage 9.
ʑProgramme does not
start.
$Start/Reload or Ready in time selected?
 Washing machine door closed?
 Childproof lock active? Deactivate apage 5.
ʑDetergent solution is
not drained.
 Is Rinse Hold (without final spin) selected? apage 3, 4.
 Clean the detergent solution pump apage 10.
 Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
 Not a fault - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
 Not a fault - the unbalanced-load detection system has cancelled the
spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
SReduced Ironing selected? apage 5.
 Selected speed too low? apage 5.
ʑThe programme
duration changes
during the wash cycle.
 Not a fault  the programme sequence is optimised for the particular
wash process. This may result in changes to the programme duration
in the display field.
ʑSpin cycle performed
several times.
 Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑResidual water in the
compartment for care
products.
 Not a fault - the action of the care product is not affected.
 Clean the insert if necessary apage 9.
ʑOdour formation in the
washing machine.
 Run programme LCottons 90 °C without laundry. Use standard
detergent.
ʑStatus display³1flashes. Foam may
be coming out of the
detergent drawer.
 Too much detergent used? Mix 1 tablespoon of fabric softener with
½ litre of water and pour into dispenser II (not for outdoor and down-
filled textiles!).
 Reduce the detergent dosage for the next wash cycle.
ʑIntense noise
formation, vibrations
and wandering
during the spin cycle.
 Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
 Transportation safety devices removed? Remove the transportation
safety devices aInstallation instructions.
ʑNoises during spin and
drain cycles.
 Clean detergent-solution pump apage 10.
ʑDisplay panel/indicator
lamps do not function
during operation.
 Power cut?
 Fuses triggered? Reset/change the fuse.
 If the fault occurs repeatedly, call customer services.
ʑProgramme sequence
longer than usual.
 Not a fault - unbalanced load detection system adjusts imbalance by
repeatedly distributing the laundry.
 Not a fault - foam detection system active - adds an additional rinse
cycle.
ʑDetergent residues
on the laundry.
 Occasionally, phosphate-free detergents contain water-insoluble
residues.
 Select the 2Rinse/cSpin cycle or brush out the laundry after
washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
 Turn the programme selector to Off and remove the mains plug from the socket.
 Turn off the water supply and call customer services aInstallation instructions.
Washing machine
en Instruction manual