Bounce fit Quest 1 User manual

Smart Wristband
User's Manual
Wear it properly
Adjust the size of the wrist according to the adjustment hole;
Buckle belt buckle. The sensor should be close to
the skin avoid moving.
Charge the bracelet
For the first me, make sure that the baery is in normal
power. If the power is not turned on normally, please
connect the charger to charge the device, and the
bracelet will automacally turn on.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app do
waload and install the app
System Requirements: Android 5.0 or above; i0S9,0 or above;Support
for Bluetooth 4,0.
IOS Android

Device connecon
For the first me, you need to connect to the APP for calibraon. Aer
the connecon is successful, the bracelet will automacally
synchronize the me.
• Open the phone app—click to start scanning - click on the device
connecon
• Aer the pairing is successful, the APP will automacally save the
Bluetooth address of the bracelet, and when the APP is opened or
running in the background, it will automacally search and connect
the bracelet;
• Android mobile phone Please ensure that the APP runs in the
background and the mobile phone system sengs are given all
permissions such as running the background and reading the contact
informaon.
Bracelet funcon descripon
• When the device is turned off, touch and hold the funcon buon for
more than 3 seconds to turn the device on
• In the Bluetooth address interface of the bracelet, press and hold the
2 second wrist watch to turn off the phone. Short press will exit the
shutdown page
• Bracelet reset device This funcon will clear all data of the bracelet
(such as step counng)
• Under the power on state, touch the short press funcon key to light
up the screen
• Whether the default clock page of the bracelet, press the short press
funcon key to switch to view different pages, no operaon default
five-second screen
• Switch to the heart rate three-in-one interface to start the test, heart
rate three-in-one interface 60s meout automacally off screen
(heart rate and blood pressure need bracelet hardware support)
Clock interface

Aer syncing with the phone, the bracelet will automacally calibrate
the me.: Press and hold the standby interface for 2 seconds to switch
the clock interface
Esmate the calories burned based on the number of walking steps
Heart rate, blood pressure, blood oxygen three- in-one
Aer entering the heart rate three-in-one test interface for a few
seconds, the currant heart rate. blood pressure, and blood oxygen test
results are displayed. This feature requires a wristband to support
heart rate and blood pressure sensor
Mul-sport mode
(Running Mode)
Under this interface, you can record the calories and duraon of
running.
(Skipping rope mode)
Under this interface, you can record the calories and duraon of rope
skipping.
(Sit-up mode )
Under this interface, you can record the calories and duraon of sit-
ups.
( Sleep mode )
When you fall asleep, the bracelet will automacally enter the sleep
monitoring mode: Automacally detect your deep sleep/shallow
sleep/wake up all night and calculate your sleep quality: Sleep data is
only supported for APP viewing. Note: Wearing a bracelet to sleep will
have sleep data and start to detect sleep at 10 o'clock in the evening.
Sleeping 3/4 hours of sleep data will be synchronized to the APP while
sleeping
APP funcon and sengs
(Personal informaon)
Please set your personal informaon aer entering the app.
Sengs - Personal Informaon, you can set gender - age - height -
weight
You can also set your daily goal steps to monitor daily compleons

(Applicaon push)
Incoming call:
In the connected state, if the call alert funeon is enabled, when the
call comes in, the wristband will vibrate and display the name or
number of the caller.(You need to give APP read address book
permission)
SMS noficaon:
In the connected state, if the SMS reminder funcon is enabled, the
bracelet will vibrate when there is a text message.
Other reminders:
In the connected state, if this funcon is enabled, when there is a
message such as we Chat, QQ, Facebook, etc., the bracelet will vibrate
to remind and display the content received by the app.(You can also
view the last three message records in the ring informaon
menu).(You need to give the APP permission to get system'
noficaons. The wristband can display 20-40 words).
Other funcons:
Turn on vibraon to set this funcon, When there is a call, message or
other reminder, the bracelet will vibrate. Hit is closed, the bracelet will
only have a screen reminder without shaking to avoid disturbing.
Tips for Android users:
When using the reminder funeon, you need to set it to allow "FitPro"
to run in the background; it is recommended to add "FitPro" to the
rights management and open all permissions.
(Alarm seng)
In the connected state, 8 alarms can be set. Aer seng, it will be
synchronized to the bracelet; offline alarm is supported, Aer the
synchronizaon is successful, even if the APP is not connected, the
bracelet will be reminded according to the set me,
(Looking for a bracelet)
In the connected state, click the "Look for the bracelet'. opon and the
bracelet

(Remote photography)
In the connected state, start the photo from the wristband or the APP
to enter the remote camera interface, shake/turn the wrist/touch the
bracelet, and automacally take a photo aer 3 seconds of counng
down. Please allow the APP to access the photo album to save the self-
portrait photo.
(Sedentary reminder) Set whether to enable the sedentary reminder
funcon, you can set the reminder interval, if you sit for a long me in
the set me, the bracelet will remind.
(Raise your hand to brighten)
Turn this funcon on. When the wristband is in the state of the screen,
li your wrist and turn the screen to your self to light up the screen.
(Do not disturb mode)
Turn on the Do Not Disturb mode. You can set the Do not disturb me
period. During the set me period, the bracelet stops receiving
noficaon messages to avoid reminding messages.
(Device reset)
Seng this feature reset will erase all data in the bracelet (such as step
counng)
(Remove device)
Remove device This feature will erase data and remove device
Basic pa rameters
Equipment type smart
wristband Type of baery
Lithium polymer
Vibraon motor
Operang
temprements
System
Requirememts
support
0 0
-10 C-50 C
method of
synchronizaon
sensor
Bluetooth 4.0
Low Power
Accelerometer
iQS 9.0 and above/Android 5.0 and above

Precauons
1. Bathing and swimming should not be worn.
2. Please Connect the bracelet when synchronizing data.
3. Do not expose the bracelet to high moisture, high temperature, or
very low temperatures for long periods of me
4. The bracelet appears to crash and restart. Please Check the phone
memory informaon clear and try again, or exit the APP and reopen it.
Component introducon
1x Quest 1 Smart Watch, 1x User Manual

THANK YOU
For Buying