BOX15 501020130310 User manual

English
Installation Instruction

UNPACKING INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
             
   
              
           
      
            
           

            
          
                
             
         

Su

Supplied Parts List
 
 
 
 
 
 
 
 



 
 
 
 

 
“” 
 
 
 
 
  
  
 


Step 1 Install the Pole to the Desktop
  “”      
      
       
      “” 
   
  “”     
      
Figure 1 Figure 2
Figure 3
Option A: Desk Clamp Install
f
e
g
h
a
i
d
Figure 4
Figure 6
Option B: Grommet Base Install
If the existing grommet hole comes with a
plastic protector, remove it to ensure a flat
surface before installing the desk mount.
1. Install the Grommet Base Plate (i) to the
Pole (a) using 3pcs M5x14 Bolts (d), and
tighten using the Allen Key (p), see Figure 4.
2. Attach Soft Pad (u2) to the Grommet
Base Plate (i), see Figure 5.
3. Position the Pole (a) on the mounting
surface and secure using the Support Plate
(f), M10 Washer (g), Spring Washer (h) and
M10 Bolt (e). Fasten the M10 Bolt using
provided Wrench (q), see Figure 6.
Existing Grommet Hole Installation





 
u2 Figure 5


Step 1 Install the Pole to the Desktop
f
e
g
h
a
i
d
Figure 7
Figure 9
Option C: Grommet Base Install
      
        
     
    
        
       
        
       
     
       
      
       
       
     
Self Drilled Grommet Hole Installation
u2 Figure 8
Install Stopper Ring to the Pole
Step 2
     
     
    
mp
a
 


Step 3A Option 1: Using Gas Spring Arm and Add-on Arm
Step 3B Option 2: Using without Add-on Arm
Mount the Monitor to VESA Plate
Step 4
c
j
l
on
k
rs
t
       
c
p


Make Necessary Adjustments, and Run Cables
Step 5
Adjust the Torque of Gas Spring
Step 6
Thank you for choosing our products.
  
p
            
             
            
        
    