Brabantia BM6W User manual

技术要求
1.颜色要求：封面：彩色印刷
封底，内页：黑白印刷；
批量时要求统一，不能有明显色差，
2.版面内容:
图案与文字应印刷清晰、规范，不能有印刷缺陷;
3.页面印刷：双面印刷；
4.成型方式：骑马钉；
5.成品尺寸：
尺寸公差按GB/T 1804-c；
6.批量生产前须送样确认。
140*210
B
C
D
E
F
B
C
D
1234
1234
借（通）用件登记
出图审查
日 期
标志 处数 更改文 件号 签 名 日 期
设计
制图
审核
工艺
周嘉慧
会签
标准化
批准
日期
重 量 比 例
视角符号
重 要 度 [B]
2020-08-18
共 1 张 第 1 张
A A
封面：
内页：105g双铜
说明书
CKBRT-A01
林宇铄
刘金利
李梅方
广东奥马冰箱有限公

BRABANTIA95L
BAR FRIDGE
Instruction Manual
BM6W
2
www.brabantia.com/electrical-appliances

THANK YOU FOR
PURCHASING
OUR 95L BAR
FRIDGE
We hope it will delight you and
that it will get a special place in
your home. Enjoy!

Ifthe supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons to avoid a hazard. This
productis not suitableforcampinguse.

WARNING! Donot use mechanical devices or other means toaccelerate the
defrosting process. Only defrost as recommended in the instruction manual.
WARNING! Do not damage the refrigerantcircuit.
WARNING! Keep ventilation openings, in the appliance enclosure or inthe built-in
structure, clear of obstruction.
WARNING! Do not use other electrical appliances (such as ice cream
makers) inside of the refrigerating appliance, unless they are approved
for this purpose by the manufacturer.
WARNING! Do not touch the light bulb if it has been on for a long
period of time because it could be very hot.
•Do not store explosive substances such as aerosol cans with a
flammable propellant in thisappliance.
•Therefrigerantobutane(R600a)iscontainedwithintherefrigerantcircuitof
the appliance, a natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
• Duringtransportation and installation of the appliance, be certain that none
of thecomponents oftherefrigerant circuit become damaged.
- avoid open flames and sources of ignition.
- thoroughly ventilate theroom inwhichtheappliance issituated.
Itisdangerousto alterthespecificationsormodifythisproductin anyway. A
damagedcord maycause ashortcircuit,fire and/orelectricshock.
This appliance is only intended to be used in household and similar applications
such as
- staffkitchenareasinshops,officesandotherworkingenvironments;
farmhouses and by clientsin hotels,motelsand other residentialtype
environments.
- bed and breakfast typeenvironments.
- catering and similar non-retailapplications.
WARNING! Electrical components (plug, power cord,compressor etc.)may only be
replaced orrepairedbyanauthorised service centre.
WARNING! The lightbulbsuppliedwiththisapplianceisa“special uselambbulb”
usableonlywiththeappliancesupplied. This“special uselamp” isnotusablefor
domestic lighting.

SAFETY INFORMATION
•Never lengthen the power cord.
• Makesurethatthepowerplugisnot squashedordamagedbythebackofthe
appliance. Asquashed ordamaged power plugmay overheat andcause a fire.
•Ensurethatthemainsplugisreadily reachable. Neverpull onthemains
cable, grasptheplugandnotthecordtodisconnecttheplugfromthemains.
• Ifthepowerplugsocketisloose,donotinsertthepowerplugasthismay cause
an electrical shock orfire.
•You must not operate the appliance without the lamp.
•This appliance is heavy. Care should be taken when moving it.
•Donotremoveortouchitemsfromthefreezercompartmentifyourhands
are damp/wet,asthismaycauseskin abrasionsorrust/ freezerburns.
•Avoid prolonged exposure of the appliance to direct sunlight.
DAILY USE
•Do not put hot on the plastic parts in the appliance.
•Do not place food products directly against the rear wall.
•Frozen food must not be re-frozen once it has been thawed out.
•Store pre-packed frozen food in accordance with the frozen food
manufacturers instructions.
•Appliance s manufactures storage recommendations should be
strictly adhered to. Refer to relevant instructions.
•Do not place carbonated or fizzy drinks in the freezer compartment as it
creates pressure on the container, which may cause it to explode, resulting
in damage to the appliance.
•Ice lollies can cause frost burns if consumed straight fromthe
appliance.
CARE AND CLEANING
1. Beforemaintenance,switchofftheappliance anddisconnectthemains plug
from the mains socket.
2. Do not clean the appliance with metalobjects.
3. Do not use sharp objects to remove frost from the appliance. Use
a plastic scraper.
4. Regularlyexaminethedrain intherefrigeratorfor defrostedwater. If necessary,
clean the drain. If the drain is blocked, water will collect in the bottom of the
appliance.

INSTALLATION
Important! For electrical connection, carefully follow these instructions.
1. Unpacktheapplianceand checkifthereisanydamage.Donot
connect theapplianceifitisdamaged.Immediatelyreportany
damageto the retailerfromwhomyouboughttheapplianceand
retainalltheoriginal packaging. NOTE: Wait at least four hours
before connecting the appliancetoallow the oil to flow back into the
compressor.
2. Adequate aircirculation must bemaintained around the applianceto
avoid overheating. To achieve sufficient ventilation follow the
instructions relevant to installation.
3. Wherever possible the spacers of the product should be against a wall to
avoid touching warm parts (compressor, condenser) in order to
prevent a possibleburn.
4. The appliance must not be located close to radiators, heaters or cookers.
5. Make sure that the mains plug is readily accessible after installation of
the appliance.
SERVICE
This product must beserviced byanauthorized servicecentre andonly genuine
spare parts must be used.
ENERGY SAVING
•Never put hot food in the appliance.
•Donotpackfoodtoocloselytogetherasthispreventsaircirculation.
•Makesurethatfooddoesnottouchthebackofthecompartments. If the
electricity goes off, do not open the doors.
•Do not open the door (s)frequently.
•Do not keep the door (s) open for too a longtime.
•Do not set the thermostat on exceeding cold temperatures.
• Some accessories, such asdrawers, may beremovedtoobtainlarger
storage volume and lower energy consumption.

6
DESCRIPTION
Pictures are for reference only
The appliance should be installed well away from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the
cabinet. To ensure best performance, if the appliance is positioned below an
overhangingwallunit,theminimumdistancebetweenthetopofthecabinetand the wall
unit must be at least 100mm. Ideally, however, the appliance should not be positioned
belowoverhangingwall units.Ensure thatthefreezerislevelledbyadjustingoneor more
of theadjustablefeetat the base of the cabinet.
WARNING! Ensure that it is possible to disconnect the appliance from the mains
power supply. Ensure that the plug is easily accessible after installation.
ELECTRICAL CONNECTION
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance toa separate earth in compliance
with current regulations and in consultation with a qualified electrician. Brabantia will not
insure and will in no way be responsible for failure to strictly adhere to this instruction
manual. This appliance complies with E.E.C. directives.
CLEANING THE INTERIOR
Before usingthe appliance for the first time, wash the interior and all internal
accessories with lukewarm water and some neutral soap to remove the
typical smell of anew product. Drythe interior thoroughly.
WARNING! Do not use detergents or abrasive powders, as these will damage
the finish.

7
Reverse Door
Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
•Ensure the unit is unplugged and empty.
•To take the door off, it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
•All parts removed must be saved to do the reinstallation of the door.
•Do not lay the unit flat as this may damage the coolant system.
•It's better that 2 people handle the unit during assembly.
1. Remove the top right hinge cover.
2. Undo the screws. Then remove the hinge bracket.
3. Remove the top left screw cover.
4. Move the core cover from left side to right side. And
then lift the upper door and place it on a padded
surface to prevent it from scratching.

8
5. Unscrew bottom hinge. Then remove the adjustable feet from the other side.
6. Unscrew and remove the bottom hinge pin with flat screw rivers, turn the
bracket over and replace the pin.
7. Refit the bracket fitting the bottom hinge pin. Replace the adjustable foot.
8. Place the door back on. Ensure the door is
aligned horizontally and vertically so that the
seals are closed on all sides before finally
tightening the top hinge.
9. Insert the hinge bracket and screw it to the top of
the unit.
10. Use a spanner to tighten it if necessary.

9
11. Put the hinge cover and the screw cover back.
Installation
Space Requirement
•Keep enough space of door open.
•Keep at least 50mm gap at two sides.
xxx
mm
xxxmm
Levelling the unit
To do this adjust the two levelling feet at front of the unit.
If the unit is not level, the doors and magnetic seal
alignments will not be covered properly.
Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance:
Climate
class
Ambient
temperature
SN
+10o C to +32o C
N
+16o C to +32o C
ST
+16o C to +38o C
T
+16o C to +43o C

10
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around
the back of the cabinet. To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the minimum distance between the
top of the cabinet and the wall unit must be at least 100 mm. Ideally, however,
the appliance should not be positioned below overhanging wall units. Accurate
levelling is ensured by one or more adjustable feet at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily accessible
after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating
plate correspond to your domestic power supply. The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose. If the
domestic power supply socket is not earthed, connect the appliance to a separate
earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are
not observed. This appliance complies with the E.E.C. directives.
Daily Use
First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and some neutral soap to remove the
typical smell of a new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the
finish.
Temperature Setting
•Plug on your appliance. The internal temperature is controlled by a
thermostat. There are 6 settings.
1 is warmest setting and 5 is coldest setting and 0 is off.
•The appliance may not operate at the correct
temperature if it is in a particularly hot or if you open
the door often.
Movable shelf
The shelf is able to be moved to suitable positions.

11
Positioning the door balconies
In order to storage food or beverage with different size, the door balconies can
be placed at different height. Follow below process to adjust the shelves.
•Step 1. pull the balcony to be free.
•Step 2. Select suitable position and press the balcony to two convex
plates until it is totally blocked.
Vegetable Drawer
The drawer is suitable for storing fruit and vegetables. It can be pull out freely.
Thawing
Deep-frozen or frozen food, prior to be used, can be thawed in a fridge
compartment or at room temperature. Place the frozen food in a dish or bowl
to avoid the flowing of condensate water when thaw it in compartment.
Helpful hints and tips
Hints for fresh food refrigeration
•To obtain the best performance:
•do not store warm food or evaporating liquids in the refrigerator
•do cover or wrap the food, particularly if it has a strong flavour
•position food so that air can circulate freely around it
Hints for refrigeration
Useful hints:
•Meat (all types): wrap in polythene bags and place on the glass
shelf above the vegetable drawer. For safety, store in this way only
one or two days at the most.
•Cooked foods, cold dishes, etc., these should be covered and may be
placed on any shelf.
•Fruit and vegetables: these should be thoroughly cleaned and
placed in the vegetable drawer.
•Butter and cheese: these should be placed in special airtight
containers or wrapped in aluminium foil or polythene bags to
exclude as much air as possible.
•Milk bottles: these should have a cap and should be stored in the
bottle rack on the door. Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the refrigerator.
Cleaning
For hygienic reasons the appliance interior, including interior accessories, should
be cleaned regularly.
Caution! The appliance may not be connected to the mains during
cleaning. Danger of electrical shock! Before cleaning, switch the appliance
off and remove the plug from the mains, or switch off or turn out thecircuit
breaker or fuse. Never clean the appliance with a steam cleaner. Moisture
could accumulate in electrical components, danger of electrical shock!Hot

12
vapours can lead to the damage of plastic parts. The appliance must be
dry before it is placed back into service.
Important! Ethereal oils and organic solvents can attack plastic parts, e.g.
lemon juice or the juice form orange peel, butyric acid, cleanser that contain
acetic acid.
•Do not allow such substances to come into contact the appliance parts.
•Do not use any abrasive cleaners
•Remove the food from the freezer. Store them in a cool place, well
covered.
•Switch the appliance off and remove the plug from the mains or
switch off or turn out the circuit breaker of fuse.
•Clean the appliance and the interior accessories with a cloth and
lukewarm water. After cleaning wipe with fresh water and rub dry.
•Accumulation of dust at the condenser increases energy
consumption. For this reason, carefully clean the condenser at the
back of the appliance once a year with a soft brush or a vacuum
cleaner.
•After everything is dry place appliance back into service.
Replace the lamp
Caution! Before replacing the lamp, disconnect the appliance
from mains power supply.
Lamp specification is listed in rating label. Follow below process to replace
the lamp:
1. Set the temperature regulation knob at number “0” to switch off the
appliance.
2. Unplug the appliance to make sure the appliance is disconnected
from main power supply.
3. Remove the lamp cover.
4. Remove the lamp cover out by a flat screwdriver.
5. Unscrew the lamp by two fingers.
6. Fit new lamp according to the opposite direction, then replace the
lamp cover.
7. Plug in the appliance and regulate the knob to right position.

13
Defrosting
The evaporator, however, will become progressively covered with frost.
This should be removed. Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
However, when the ice becomes very thick on the evaporator, complete
defrosting should be carried out as follows:
 pull out the plug from the socket.
 remove all stored food, wrap it in several layers of newspaper and put it in a
cool place.
 keep the door open and placing a basin underneath of the appliance to
collect the defrost water.
 when defrosting is completed, dry the interior thoroughly
 replace the plug in the power socket to run the appliance again.

Troubleshooting
Caution! Before troubleshooting, disconnect the power supply. Only a
qualified electrician of competent person must do the troubleshooting that is
not in this manual.
Important! There are some sounds during normal use (compressor,
refrigerant circulation).
Problem
Possible cause
Solution
Appliance does not
work
Temperature regulation knob is
set at number “0”.
Set the knob at other number to
switch on the appliance.
Mains plug is not plugged in
or is loose
Insert mains plug.
Fuse has blown or is defective
Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
The food is too warm.
Temperature is not properly
adjusted.
Please look in the initial Temperature
Setting section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is near a heat
source.
Please look in the installation
location section.
Appliance cools too
much
Temperature is set too cold.
Turn the temperature regulation knob to
a warmer setting temporarily.
Unusual noises
Appliance is not level.
Re-adjust the feet.
The appliance is touching the
wall or other objects.
Move the appliance slightly.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
If necessary, carefully bend the
component out of the way.
If the malfunction shows again, contact the Service Centre.

PACKAGING MATERIALS
Thematerialswiththe symbolis recyclable.Disposeofthe packaging
in a suitable collection container to recycle it.
DISPOSAL OF THE APPLIANCE
1. Disconnect the mains plug from the mainssocket.
2. Cut off the mains cable and discard it.
3. Remove doors, locks and seals.
WARRANTY
In the unlikely event that you have a problem with your Brabantia
appliance, please be aware that your Brabantia appliance has a 2-year
warranty.
For all enquiries, please contact the retailer you purchased this product
from or the New Zealand Brabantia Agent toll free number 0800 127 727.
Warranty exclusions:
The warranty will not be valid if:
1. The product has not been installed, operated or maintained in
accordance with the manufacturer's operating instructions provided
with the product.
2. The product has been used for any purpose other than its intended
function.
3. The damage or malfunction of the product is caused by any of the
following:

- Incorrect voltage
- Accidents (including liquid or moisture damage)
- Misuse or abuse of the product
- Faulty or improper installation
- Mains supply problems, including power spikes or lightning
damage
- Infestation by insects
- Tampering or modification of the product by persons other than
authorised service personnel
- Exposure to abnormally corrosive materials
- Insertion of foreign objects into the unit
- Usage with accessories not pre-approved by Brabantia
Please refer to and heed all warnings and precautions in this
Instruction Manual.
Due to continuous product development, specifications may be
subject to change without prior notification.
An alternative format of the instruction manual is available on request
of the user in a PDF version via email or post.
ENVIRONMENT PROTECTION
This appliance does not contain gasses which can damage the ozone layer in
either its refrigerant circuit or in its insulation materials. However, the appliance
must not be discarded together with urban refuse and rubbish waste as the
insulation foam contains flammable gasses. This appliance mustbedisposed of
according to the appliance regulations of your local authorities. Avoid damaging
the cooling unit, especially the heat exchanger.
Thematerials used inthis appliance marked with the symbol is
recyclable.
This symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriatewastehandlingof thisproduct.
Formoredetailed information about recycling of this product, please
contact your local council, your household waste disposal service or
the shop where you purchased the product.

Manufactured by SRB Pacific Limited under
exclusive licence of Brabantia Nederland B.V.
SRB Pacific Limited
P O Box 113068, Newmarket
Auckland 1149, New Zealand
PRODUCT INFORMATION
BM6W 95L FRIDGE
CKBBT-